Huang, Bin wrote:
Phil and list,
Here is what I learned from my pvfs2-cp failure. It turned
out that I did not install my Berkeley DB which I thought
I did.
I found that without Berkeley DB, pvfs2.8.1 deamon can
still be installed, be configured and be run partially
(only pvfs2-cp and pvfs2-touch failed). For me, that makes
debugging difficult because there is no reminder for missing
a DB in the verbose message.Correct me if I was wrong.
But after I installed the DB 4.3, pvfs2.8.1-ping gave me a new failure:
(1) Parsing tab file...
(2) Initializing system interface...
(3) Initializing each file system found in tab file:
/home/bhuang2/research/pvfs/swfs/pvfs2/pvfs2-build/pvfs2tab...
PVFS2 servers: tcp://rsass-homer:3334
Storage name: pvfs2-fs
Local mount point: /mnt/pvfs2
[E 10:53:34.815650] Error: poorly formatted protocol message received.
[E 10:53:34.815763] Protocol version mismatch: received major version
5 when expecting 6.
[E 10:53:34.815778] Please verify your PVFS2 installation
[E 10:53:34.815790] and make sure that the version is consistent.
[E 10:53:34.815813] msgpairarray decode error: Protocol not supported
/mnt/pvfs2: FAILURE!
Failure: could not initialze at least one of the target file systems.
(4) Searching for /mnt/pvfs2 in pvfstab...
[E 10:53:34.815869] Error: /mnt/pvfs2/ resides on a PVFS2 file system
that has not yet been initialized.
Failure: could not find filesystem for /mnt/pvfs2 in pvfs2tab
/home/bhuang2/pvfs2-build/pvfs2tab
Entry 0: /mnt/pvfs2
I have tried this patch by kevin but that does not help:
http://www.pvfs.org/fisheye/rdiff/PVFS?csid=MAIN:slang:20090306220603&u&N
<http://www.pvfs.org/fisheye/rdiff/PVFS?csid=MAIN:slang:20090306220603&u&N>
Maybe I will switch back to the stable pvfs2.7.1.
Thanks for all your helping.
Ben
Hi Ben,
That error message indicates that pvfs2-ping was communicating with an
old server. Can you double check that you upgraded both the client side
tools and all of the server daemons at the same time?
I'm surprised that you were able to compile PVFS without a Berkeley DB
library. Do you by any chance still have a config.log from that build?
thanks,
-Phil
_______________________________________________
Pvfs2-users mailing list
[email protected]
http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
