did you create the /etc/pvfs2tab file? Becky -- Becky Ligon HPC Admin Staff PVFS/OrangeFS Developer Clemson University 864-650-4065
> Hi all, > > I set up the PVFS-2.8.2 with kernel version *2.6.35.11-83.9.amzn1.x86_64. > *I > run the 'make kmod' as well as 'make kmod_install' successfully after I > compiled the pvfs-2.8.2 source tree. Then I tried to add some mount point > to > the /etc/pvfs2tab in another machine. I insmod pvfs2.ko with messages > following. When I run 'lsmod', I saw pvfs2 module was just there. > ==================== > Message from syslogd@ip-10-17-18-247 at Apr 4 18:25:57 ... > kernel:[12187.461117] Oops: 0000 [#1] SMP > Message from syslogd@ip-10-17-18-247 at Apr 4 18:25:57 ... > kernel:[12187.461117] last sysfs file: > /sys/devices/system/cpu/cpu15/cache/index2/shared_cpu_map > Message from syslogd@ip-10-17-18-247 at Apr 4 18:25:57 ... > kernel:[12187.461117] Stack: > Message from syslogd@ip-10-17-18-247 at Apr 4 18:25:57 ... > kernel:[12187.461117] Call Trace: > Message from syslogd@ip-10-17-18-247 at Apr 4 18:25:57 ... > kernel:[12187.461117] Code: e8 c9 fe ff ff c9 83 f8 01 0f 94 c0 0f b6 c0 > c3 > 90 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 54 49 89 fc 53 48 > 89 f3 <48> 83 3e 00 74 24 0f 1f 44 00 00 48 8b 73 18 4c 89 63 20 48 85 > Message from syslogd@ip-10-17-18-247 at Apr 4 18:25:57 ... > kernel:[12187.461117] CR2: 0000000000000003 > =================== > > And the dmesg is as following: > ==================== > [12187.461117] [<ffffffffa027d1ec>] pvfs2_proc_initialize+0x1c/0x30 > [pvfs2] > [12187.461117] [<ffffffffa028c1c5>] pvfs2_init+0x1c5/0x23c [pvfs2] > [12187.461117] [<ffffffffa028c000>] ? pvfs2_init+0x0/0x23c [pvfs2] > [12187.461117] [<ffffffff81002047>] do_one_initcall+0x37/0x1a0 > [12187.461117] [<ffffffff810818a2>] sys_init_module+0xb2/0x200 > [12187.461117] [<ffffffff8100ae82>] system_call_fastpath+0x16/0x1b > [12187.461117] Code: e8 c9 fe ff ff c9 83 f8 01 0f 94 c0 0f b6 c0 c3 90 90 > 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 54 49 89 fc 53 48 89 f3 > <48> 83 3e 00 74 24 0f 1f 44 00 00 48 8b 73 18 4c 89 63 20 48 85 > [12187.461117] RIP [<ffffffff810583ad>] sysctl_set_parent+0xd/0x40 > [12187.461117] RSP <ffff8805a7051dc8> > [12187.461117] CR2: 0000000000000003 > [12187.621903] ---[ end trace 9c2a971e5cf0a5c0 ]--- > [12187.628366] serial8250: too much work for irq4 > ===================== > > After that, I started the server/client respectively. Then I tried the > pvfs2-ping and it worked as expected. Then I tried in the command line to > mount it for POSIX-style use. But the mount command failed with error > message "mount: unknown filesystem type 'pvfs2'". I tried twice on two > different machines with no luck. I followed the quick start guide step by > step so that there should be something out of it I missed. > > Any idea will be highly appreciated. > > Best Regards. > -- > Mingliang Liu (åæ亮 in Chinese) > > PACMAN Group, Dept. of Computer Science & Technology > Tsinghua University, Beijing 100084, China > Tel: +86-136 1126 4251 (Mobile) > Email: [email protected] > _______________________________________________ > Pvfs2-users mailing list > [email protected] > http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users > _______________________________________________ Pvfs2-users mailing list [email protected] http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
