[snip]
Is there some way to specify that an alias can refer to two different
mx endpoints so that we can tell PVFS2 which MX board is the localhost
interface? (when I have both "eth3" and "lo" boards attached in
Open-MX, I wind up with e.g. begbie:0 for "eth3" and begbie:1 for
"lo"). I've tried changing the configuration line to "Alias begbie
mx://begbie:0:3 mx://begbie:1:3" but that gives a config error. I had
previously searched the documentation and list archive for a way to do
this, but found nothing much except a note that one could not attach
two MX boards on the same server (something I actually would like to
do since I have two 10Gbe cards in each server).
Please let me know if I've missed something about how I can tell PVFS2
to use the localhost interface -- if it is documented somewhere, I've
managed to miss it despite lots of looking!
[snip]
Hi Josh,
PVFS doesn't have this functionality, sorry. It expects to be able to
use the same addressing information on any node.
-Phil
_______________________________________________
Pvfs2-users mailing list
[email protected]
http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
