Hi! I`m evaluating now version 2.8.5 and I have been able to connect and use hosts with single port infiniband cards (Mellanox Infinihost III, ) using the ib0 Interface, connection set to
ib://host:3335/pvfs2 Integrating of hosts with 2-port cards fails. On this hosts I have plugged in port ib1, configured IPoverIB and I'm able to ping between the infiniband hosts. I have also an OpenSM Subnet Manager running on each host. When starting the servers on these hosts they complain about that they cannot reach the other pvfs2-servers and I should check if my subnetmanager on that particular host is running. I suppose, the connection request is sent on ib0 instead of ib1. My question is, if there are any parameters to tell the server to use port 1 instead of port 0 Despite of all, everything runs very fine and we have very nice data transfers (the 1-port 5 Nodes are writing with 415 MB per second). I would appreciate any help. Greeting from Salzburg/Austria/Europe Vlad Popa University of Salzburg Jakob-Harringer-Str.2 5020 Salzburg Austria/Europe _______________________________________________ Pvfs2-users mailing list [email protected] http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
