Hello,
The PVFS server can not start (OK does not follow the "starting ..."
message). Could you get me some clue on the problem ?
pvfs2-server /etc/pvfs2/pvfs2-fs.conf
[S 01/04 12:30] PVFS2 Server on node yoda version 2.8.2 starting...
more /tmp/pvfs2-server.log
[D 01/04 12:28] PVFS2 Server version 2.8.2 starting.
[E 01/04 12:28] Error initializing filesystem pvfs2-fs
[E 01/04 12:28] Error: Could not initialize server interfaces;
aborting.
[E 01/04 12:28] Error: Could not initialize server; aborting.
dmesg | tail
[ 2468.522593] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 2468.522597] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 2480.458481] wlan0: authenticate with 8a:25:15:bb:c8:51
[ 2480.467259] wlan0: direct probe to 8a:25:15:bb:c8:51 (try 1/3)
[ 2480.671354] wlan0: send auth to 8a:25:15:bb:c8:51 (try 2/3)
[ 2480.684064] wlan0: authenticated
[ 2480.687307] wlan0: associate with 8a:25:15:bb:c8:51 (try 1/3)
[ 2480.761100] wlan0: RX AssocResp from 8a:25:15:bb:c8:51 (capab=0x401
status=0 aid=2)
[ 2480.761267] wlan0: associated
[ 2491.309807] pvfs2-server[3009]: segfault at 18 ip 000000000045bd0c
sp 00007fff12d4de70 error 4 in pvfs2-server[400000+d2000]
To compile PVFS, I followed this process:
~> sudo apt-get install libdb5.3 libdb5.3-dev db5.3-doc
~> sudo apt-get install libaio1 libaio1-dbg libaio-dev
~> tar -xf pvfs-2.8.2.tar.gz
~> cd pvfs-2.8.2
~> ./configure --prefix=/home/houssen/Programs/local
CFLAGS=-D_GNU_SOURCE
note : -D_GNU_SOURCE needed to resolve REG_EIP undeclared (signal
handling)
~> make
~> make install
To configure PVFS, I followed this process:
/etc> sudo mkdir pvfs2
/etc/pvfs2> sudo /home/houssen/Programs/local/bin/pvfs2-genconfig
pvfs2-fs.conf
* Enter hostnames [Default is localhost]: yoda [yoda is my hostname -
if I use localhost, the server can't start as it has a problem with
hostname]
/etc/pvfs2> sudo /home/houssen/Programs/local/sbin/pvfs2-server
/etc/pvfs2/pvfs2-fs.conf -f
/etc> sudo touch pvfs2tab
/etc> sudo chmod a+r pvfs2tab
/etc> more pvfs2tab
tcp://yoda:3334/pvfs2-fs /mnt/pvfs2 pvfs2 defaults,noauto 0 0
/mnt> mkdir pvfs2
/mnt> chown houssen pvfs2
/mnt> chgrp houssen pvfs2
Thanks,
Franck
PS : I run Ubuntu 14.04 on my laptop. For now I only would like to
install PVFS on my laptop.
_______________________________________________
Pvfs2-users mailing list
[email protected]
http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
