Hi, My cable-tv-provider (Liwest, Austria) broadcasts Eurosport in 'Dual language'-Mode. If I watch this channel I have a mixture of english/german audio. On my TV I hear the german audio.
I tried to experiment with /sys/class/pvrusb2/sn-8239281/ctl_audio_mode/cur_val the results are: echo "Stereo" > /sys/class/pvrusb2/sn-8239281/ctl_audio_mode/cur_val -> mixture of german/english echo "Lang1" > /sys/class/pvrusb2/sn-8239281/ctl_audio_mode/cur_val -> english only echo "Lang2" > /sys/class/pvrusb2/sn-8239281/ctl_audio_mode/cur_val -> english only It seems that there is something broken with the Lang1 and Lang2 settings, cos the 2 settings have the same effect. Does any1 know how to setup the system, that I can hear the german audio? Do the Lang1 and Lang2 settings work? My config: Kernel: 2.6.16 Driver: pvrusb2-mci-20061119 /usr/src/pvrusb2-mci-20061119/driver/pvrusb2-main.c: Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner : 20061119 (from www.isely.net) /usr/src/pvrusb2-mci-20061119/driver/pvrusb2-main.c: Debug mask is 15 (0xf) DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X). adapter has MAC addr = 00:d0:5c:1f:79:a0 msp3400 2-0040: MSP3415G-B8 found @ 0x80 (pvrusb2_a) msp3400 2-0040: MSP3415G-B8 supports nicam and radio, mode is autodetect and autoselect tuner 2-0061: chip found @ 0xc2 (pvrusb2_a) tda9887 2-0043: chip found @ 0x86 (pvrusb2_a) tveeprom 2-0050: Hauppauge model 29039, rev D257, serial# 8239281 tveeprom 2-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 2-0050: audio processor is MSP3415 (idx 6) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has radio, has IR remote tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) msp3400 2-0040: MSP3415G-B8 rev1 = 0x0207 rev2 = 0x0f48 msp3400 2-0040: Audio: volume 65535 msp3400 2-0040: Audio: balance 0 bass 0 treble 0 loudness off msp3400 2-0040: Mode: unknown msp3400 2-0040: Standard: could not detect sound standard (mono) msp3400 2-0040: ACB: 0x0c00 saa7115 2-0021: Audio frequency: 48000 Hz saa7115 2-0021: Input: Composite 4 saa7115 2-0021: Video signal: bad saa7115 2-0021: Frequency: 50 Hz saa7115 2-0021: Detected format: BW/No color tuner 2-0061: Tuner mode: analog TV tuner 2-0061: Frequency: 175.25 MHz tuner 2-0061: Standard: 0x00000005 tda9887 2-0043: Data bytes: b=0x14 c=0x74 e=0x49 pvrusb2: Device initialization completed successfully. pvrusb2: registered device video1 [mpeg] Thx for your help, Christian Haider P.S: Thx Mike for creating this driver. _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
