Hi, I am using the latest drivers (suppose) with my WinTV PVR2. Everything is working fine except the output is in ntsc format. How to change it to PAL?
tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) cx25840 1-0044: Video signal: not present cx25840 1-0044: Detected format: NTSC-M cx25840 1-0044: Specified standard: PAL-BDGHI cx25840 1-0044: Specified video input: Composite 7 cx25840 1-0044: Specified audioclock freq: 44100 Hz cx25840 1-0044: Detected audio mode: forced mode cx25840 1-0044: Detected audio standard: no detected audio standard cx25840 1-0044: Audio muted: yes cx25840 1-0044: Audio microcontroller: running cx25840 1-0044: Configured audio standard: automatic detection cx25840 1-0044: Configured audio system: automatic standard and mode detection cx25840 1-0044: Specified audio input: Tuner (In8) cx25840 1-0044: Preferred audio mode: stereo cx25840 1-0044: Selected 65 MHz format: autodetect cx25840 1-0044: Selected 45 MHz format: chroma tda9887 1-0043: Data bytes: b=0x14 c=0x6e e=0x49 tuner 1-0061: Tuner mode: analog TV tuner 1-0061: Frequency: 175.25 MHz tuner 1-0061: Standard: 0x00000005 wm8775 1-001b: Input: 2 pvrusb2: Device initialization completed successfully. pvrusb2: registered device video0 [mpeg] Mika Sipponen _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
