For the sake of anybody's sanity while searching for a possible solution in the future and for completion of this thread, I've resorted this issue being h/w related specifically with this specific pvrusb2 device.
The other day, I tested the pvrusb2 device on a windows laptop and IR detection *also* failed. Even after upgrading to the latest Hauppauge drivers and IR application. So, the scenario displayed on two different boxes and two different O/S's using two separate driver trees leads me to believe the source of my issue is the pvrusb2 device's specific h/w. Possibilities are: 1) Still have not ruled-out a faulty power supply for the pvrusb2 device. 2) Loose solder connection on the pvrusb2 device. 3) Bad IR chip, etc ... (As far as TuxOnIce (aka Suspend2) or Kexec rebooting hindering LIRC/IR stability, I can't even say at this point as my issue seems to be more closely related to the pvrusb2 h/w itself.) -- Roger http://www.eskimo.com/~roger/index.html Key fingerprint = 8977 A252 2623 F567 70CD 1261 640F C963 1005 1D61 Sun Mar 9 15:21:10 AKDT 2008 _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
