Michael Krufky wrote: > Tina Ning wrote: >> I tried v4l-dvb latest version on my system with HVR1950 plugged in (I >> put all of modules inside /lib/modules/xxxx/extra folder), and added >> "inmod pvrusb2.ko" in my startup scripts. From the log, >> usb_register_driver was called, but not usb_probe_interface. When I >> checked the output of "cat /proc/bus/usb/devices", it showed HVR-1950's >> " driver=(None)". Do I need to insert other modules from v4l-dvb >> package? >> >> >> I tried standalone package(20080120) running on my system as well, I got >> the same result. I saw HVR-1950 usb device from proc's usb/device, but >> usb_probe_interface was not called. Do I miss something here? > > > Do you have the fx2 firmware in the correct location? (usually /lib/firmware/ > ) > > If you don't have the firmware yet, you can download it from here: > > http://steventoth.net/linux/hvr1950/v4l-pvrusb2-73xxx-01.fw > > Eventually, the firmware extractions scripts will be updated for the hvr1950, > but you can use this link in the meanwhile. > > > If you're having trouble getting the driver to build and install correctly, > this is the exact procedure that I recommend: > > hg clone http://linuxtv.org/hg/v4l-dvb > cd v4l-dvb > make > sudo make install > sudo make unload > sudo modprobe pvrusb2 > > If that doesnt work for you, first try rebooting your machine. If it still > doesn't work, please respond with full `dmesg` output and let me know what > linux distro you are using.
...on a second thought, it would be better to use Mike Isely's pvrusb2 mercurial repository, rather than the master branch. instead of using "http://linuxtv.org/hg/v4l-dvb"; using "http://linuxtv.org/hg/~mcisely/pvrusb2";. Also, if you dont have "hg" (mercurial) available, then you can download a tarball from the following link: http://linuxtv.org/hg/~mcisely/pvrusb2/archive/tip.tar.bz2 Good Luck, Mike Krufky _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
