On Sat, Aug 23, 2008 at 10:05:05AM -0500, Dan Bodoh wrote: > Aug 17 17:59:57 mythbox kernel: [831389.816433] pvrusb2: > ***WARNING*** device's encoder appears to be stuck (status=0x00000003) > Aug 17 17:59:57 mythbox kernel: [831389.816442] pvrusb2: Encoder > command: 0x81 > Aug 17 17:59:57 mythbox kernel: [831389.816445] pvrusb2: Giving up > on command. It is likely that this is a bad idea... > Aug 17 17:59:57 mythbox kernel: [831389.816450] pvrusb2: Error > recovery initiated > Aug 17 17:59:57 mythbox kernel: [831389.816454] pvrusb2: Retrying > device reconfiguration
I had this very same problem, which was happening several times aday I suspected something was amok when I went off for a week in Hawaii, came back, and the wintv-pvrusb2 had *not* crapped out. This was because I'd shut off the room's A/C for my trip...and the pvrusb2 was plugged into the same outlet w/out protection. (Why, I'm not sure -- I blame my brother ;) ). But it's plugged into the UPS now, we'll see if that fixes it. -Scott _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
