On Tue, 2009-06-02 at 20:00 -0500, Mike Isely wrote: > Then again if Roger is able to make this at least partially work then > maybe everything I've said above is unneeded.
The post just prior to this one, I posted a quick IRW output of just pushing two buttons. You might have missed the post Mike or you're just catching-up. Irw reports using the configuration for "Hauppauge_350" I just earlier today tested all the buttons on my hvr-1950 remote and conclude all the buttons do appear to work just fine (for Gentoo's lirc build). # uname -a Linux localhost2.local 2.6.29-gentoo-r4Y #9 SMP PREEMPT Tue Jun 2 03:38:16 AKDT 2009 i686 Pentium III (Coppermine) GenuineIntel GNU/Linux =app-misc/lirc-0.8.4a (The above versions have all been posted to this list already.) The only over site I can think of is, Gentoo packages the lirc package and applies patches. Along with this kernel also, it does have some patches too, but most relevant patches for this issue are going to be the lirc ones. Viewing my distro's patch files for lirc does show quite a few. I think, if people *are* using the same lirc version as myself, and their older pvrusb2 device does work, they should try grepping the Gentoo lirc patch files or applying them manually as one debug method. Really, I think users should file a bug report with their distro at this point if it isn't something with their configuration. One thing I just noticed, my /etc/lircd.conf file doesn't seem to be provided by my distro's Lirc ebuild. It provides several Hauppauge remotes, for which the Hauppauge_350 is used for the HVR-1950 remote. (I'm wondering if I got this config file from Mike's site at one time?) See attachment! (I'll also send the attch to ric incase this gets stripped.) (One other neat note, /dev/lirc0 & /dev/lirc1 exists and it would seem lirc picks-up the IR signals even with the /dev/lirc0 unplugged -- even though /etc/conf.d/lirc is defined to use /dev/lirc0. However, I'm still initially going through all these configurations a little at a time.) > > > > P.S. Silly question, but just to check - the HVR-1950 is the only IR sensing > > device on your system, right? Is there a chance that lirc is picking up the > > remote's signals on some other input? > > Roger has another (29xxx I think) device nearby but he did tell me that > he disconnected it once just to prove that the signals were not coming > from it. > > -Mike One of my earlier posts likely do declare I already removed the pvrusb2 device prior to testing. However, as I mentioned within irssi initially, I totally forgot about the older pvrusb2 2900 unit! --- snip ---- Sat 12:55pm > P.S. Silly question, but just to check - the HVR-1950 is the only IR > sensing device on your system, right? Is there a chance that lirc is > picking up the remote's signals on some other input? This isn't as stupid sounding question as it may sound. It's only stupid if you're the one playing with remotes in front of two devices without even thinking the other older pvrusb2 device is picking up the IR signals. --- snip ---- -- Roger http://rogerx.freeshell.org
# # this config file was automatically generated # using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999 # # contributed by Jens Leuschner <[email protected]> # # brand: Hauppauge # model: # supported devices: WinTV primo; WinTV pci; WinTV radio # # This config file will work with both homebrew receivers and # original Hauppauge TV cards !!! # begin remote name Hauppauge bits 13 flags SHIFT_ENC eps 30 aeps 100 one 950 830 zero 950 830 plead 960 gap 89584 repeat_bit 2 begin codes TV 0x000000000000100F RADIO 0x000000000000100C FULL_SCREEN 0x000000000000102E CH+ 0x0000000000001020 CH- 0x0000000000001021 VOL- 0x0000000000001011 VOL+ 0x0000000000001010 MUTE 0x000000000000100D SOURCE 0x0000000000001022 1 0x0000000000001001 2 0x0000000000001002 3 0x0000000000001003 4 0x0000000000001004 5 0x0000000000001005 6 0x0000000000001006 7 0x0000000000001007 8 0x0000000000001008 9 0x0000000000001009 0 0x0000000000001000 RESERVED 0x000000000000101E MINIMIZE 0x0000000000001026 end codes end remote # # this config file was automatically generated # using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003 # # contributed by # # brand: Hauppauge # model no. of remote control: # devices being controlled by this remote: PVR 2/350 # begin remote name hauppauge_pvr bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 969 811 zero 969 811 plead 1097 gap 114605 toggle_bit 2 begin codes Power 0x00000000000017FD Go 0x00000000000017FB 1 0x00000000000017C1 2 0x00000000000017C2 3 0x00000000000017C3 4 0x00000000000017C4 5 0x00000000000017C5 6 0x00000000000017C6 7 0x00000000000017C7 8 0x00000000000017C8 9 0x00000000000017C9 Back/Exit 0x00000000000017DF 0 0x00000000000017C0 Menu 0x00000000000017CD Red 0x00000000000017CB Green 0x00000000000017EE Yellow 0x00000000000017F8 Blue 0x00000000000017E9 Ch+ 0x00000000000017E0 Ch- 0x00000000000017E1 Vol- 0x00000000000017D1 Vol+ 0x00000000000017D0 Ok 0x00000000000017E5 Mute 0x00000000000017CF Blank 0x00000000000017CC Full 0x00000000000017FC Rewind 0x00000000000017F2 Play 0x00000000000017F5 Forward 0x00000000000017F4 Record 0x00000000000017F7 Stop 0x00000000000017F6 Pause 0x00000000000017F0 Replay 0x00000000000017E4 Skip 0x00000000000017DE end codes end remote # # this config file was automatically generated # using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 # # contributed by # # brand: Hauppauge 350 # Created: G.J. Werler (The Netherlands) # Project: Mythtv Fedora Pundit-R www.mythtvportal.com # Date: 2004/11/28 # model no. of remote control: Hauppauge A415-HPG # devices being controlled by this remote: PVR-350 # begin remote name Hauppauge_350 bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 969 811 zero 969 811 plead 1097 gap 114605 toggle_bit 2 begin codes Go 0x00000000000017BB Power 0x00000000000017BD TV 0x000000000000179C Videos 0x0000000000001798 Music 0x0000000000001799 Pictures 0x000000000000179A Guide 0x000000000000179B Radio 0x000000000000178C Up 0x0000000000001794 Left 0x0000000000001796 Right 0x0000000000001797 Down 0x0000000000001795 OK 0x00000000000017A5 Back/Exit 0x000000000000179F Menu/i 0x000000000000178D Vol+ 0x0000000000001790 Vol- 0x0000000000001791 Prev.Ch 0x0000000000001792 Mute 0x000000000000178F Ch+ 0x00000000000017A0 Ch- 0x00000000000017A1 Record 0x00000000000017B7 Stop 0x00000000000017B6 Rewind 0x00000000000017B2 Play 0x00000000000017B5 Forward 0x00000000000017B4 Replay/SkipBackward 0x00000000000017A4 Pause 0x00000000000017B0 SkipForward 0x000000000000179E 1 0x0000000000001781 2 0x0000000000001782 3 0x0000000000001783 4 0x0000000000001784 5 0x0000000000001785 6 0x0000000000001786 7 0x0000000000001787 8 0x0000000000001788 9 0x0000000000001789 Asterix 0x000000000000178A 0 0x0000000000001780 # 0x000000000000178E Red 0x000000000000178B Green 0x00000000000017AE Yellow 0x00000000000017B8 Blue 0x00000000000017A9 end codes end remote # # this config file was automatically generated # using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005 # # contributed by anton|ganthaler.at and juergen.wilhelm|aon.at # members of linux user group Vorarlberg www.lugv.at # # for ir remote controler from Hauppauge WinTV Nexus-S # most of the keys are supported # # brand: Hauppauge # model no. of remote control: WinTV Nexus-S # devices being controlled by this remote: # begin remote name Hauppauge_WinTV_Nexus-S bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 944 828 zero 944 828 plead 980 gap 113932 min_repeat 1 toggle_bit 2 begin codes Up 0x0000000000001794 Down 0x0000000000001795 Left 0x0000000000001796 Right 0x0000000000001797 Power 0x00000000000017BD Ok 0x00000000000017A5 Menu 0x000000000000178D Back 0x000000000000179F Red 0x000000000000178B Green 0x00000000000017AE Yellow 0x00000000000017B8 Blue 0x00000000000017A9 0 0x0000000000001780 1 0x0000000000001781 2 0x0000000000001782 3 0x0000000000001783 4 0x0000000000001784 5 0x0000000000001785 6 0x0000000000001786 7 0x0000000000001787 8 0x0000000000001788 9 0x0000000000001789 Play 0x00000000000017B5 Pause 0x00000000000017B0 Stop 0x00000000000017B6 Record 0x00000000000017B7 FastFwd 0x00000000000017B4 FastRwd 0x00000000000017B2 Channel+ 0x00000000000017A0 Channel- 0x00000000000017A1 Volume+ 0x0000000000001790 Volume- 0x0000000000001791 Mute 0x000000000000178F Timers 0x000000000000178A Recordings 0x000000000000178E Back 0x000000000000179F Record 0x00000000000017B7 Pause 0x00000000000017B0 end codes end remote # # this config file was automatically generated # using lirc-0.8.3pre1(default) on Sat Jun 21 12:36:46 2008 # # contributed by Matthew Wright # # brand: Hauppauge (HRV-1600 RT Remote) # model no. of remote control: A415-HPG-A # devices being controlled by this remote: # begin remote name Hauppauge bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 919 852 zero 919 852 plead 930 gap 112908 toggle_bit_mask 0x800 begin codes power 0x17BD go 0x17BB tv 0x179C videos 0x1798 music 0x1799 pictures 0x179A guide 0x179B radio 0x178C exit 0x179F menu 0x178D prevch 0x1792 mute 0x178F up 0x1794 down 0x1795 left 0x1796 right 0x1797 ok 0x17A5 volup 0x1790 voldown 0x1791 chup 0x17A0 chdown 0x17A1 record 0x17B7 stop 0x17B6 rewind 0x17B2 fastfwd 0x17B4 play 0x17B5 replay 0x17A4 skip 0x179E pause 0x17B0 1 0x1781 2 0x1782 3 0x1783 4 0x1784 5 0x1785 6 0x1786 7 0x1787 8 0x1788 9 0x1789 * 0x178A 0 0x1780 # 0x178E red 0x178B green 0x17AE yellow 0x17B8 blue 0x17A9 sub/cc 0x178E text 0x178A home 0x17BB end codes end remote
_______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
