Hi! I have problems compiling the latest snapshot driver. I'm constantly hitting on "no such file or directory" despite kernel sources being there where they're supposed to be (the log below). But despite including all the necessary files in the drivers directory (moving them form the source into pvrusb2/driver) I still get errors when compiling. Any ideas? This is Debian Lenny box, running a custom 2.6.29 or debian stock kernel from sid (2.6.29). Compiling against stock kernel 2.6.26 is ok.
Then I chose to compile it on mythbuntu 9.04. It did compile but when I connected the device the process stopped when it said it is loading the v4l-cx2341x-enc.fw file but tt is never loaded (it stops on the message "loading the firmware...". I tried the CD firmware, the beta 4.8a drivers. It's all the same. Since a couple of you are already running the latest snapshot, I was wondering how you did it. I have a HVR-1900 that still needs a working digital tuner, that's why I decided to try again with the new snapshot driver to check if the digital tuning indeed is fixed. But anyhow - any words on that additional firmware file I talked about a while ago? I found the firmware here as well for the HVR-1700 device: http://steventoth.net/linux/ make INSTALL_MOD_DIR=pvrusb2 -C /lib/modules/2.6.29.4-custom/source M=/share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver CONFIG_VIDEO_PVRUSB2=m CONFIG_VIDEO_PVRUSB2_24XXX=y CONFIG_VIDEO_PVRUSB2_SYSFS=y CONFIG_VIDEO_PVRUSB2_DVB=y CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y CONFIG_VIDEO_ADV_DEBUG=y modules make[1]: Entering directory `/home/public/temp/kernel/linux-2.6.29.4' CC [M] /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-ctrl.o In file included from /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-devattr.h:28, from /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-hdw-internal.h:58, from /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-ctrl.c:24: /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-dvb.h:5:26: error: dvb_frontend.h: No such file or directory /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-dvb.h:6:23: error: dvb_demux.h: No such file or directory /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-dvb.h:7:21: error: dvb_net.h: No such file or directory /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-dvb.h:8:20: error: dmxdev.h: No such file or directory In file included from /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-devattr.h:28, from /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-hdw-internal.h:58, from /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-ctrl.c:24: /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-dvb.h:17: error: field ‘dvb_adap’ has incomplete type /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-dvb.h:18: error: field ‘dmxdev’ has incomplete type /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-dvb.h:19: error: field ‘demux’ has incomplete type /share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-dvb.h:20: error: field ‘dvb_net’ has incomplete type make[2]: *** [/share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver/pvrusb2-ctrl.o] Error 1 make[1]: *** [_module_/share/dmz/hardware/Hauppauge/pvrusb2-mci-20090509/driver] Error 2 make[1]: Leaving directory `/home/public/temp/kernel/linux-2.6.29.4' make: *** [modules] Error 2 _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
