My hvr-1950 seems to require "procreload=1" module option for pvrusb2.
On reboots or system halts, if I don't first power cycle the hvr-1950, the newly booted O/S will load the pvrusb2 module, but fail to actually do anything else with the device. On the first boot with stale firmware loaded in the hvr-1950, I get a /dev/video0 & no /dev/dvb. The /dev/video0 is unusable. On second boot with the same stale firmware, I get neither /dev/video0 or /dev/dvb. Let me know if you need a clipping of dmesg. Currently, I only see two lines of debug in dmesg (when the pvrusb2 module is loaded). I'm guessing this is more of a problem with a firmware hook? But I currently see no hook in dmesg for firmwares. $ uname -a Linux localhost2.local 2.6.29-gentoo-r4Y #9 SMP PREEMPT Tue Jun 2 03:38:16 AKDT 2009 i686 Pentium III (Coppermine) GenuineIntel GNU/Linux -- Roger http://rogerx.freeshell.org _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
