Mike, Been an interesting few months playing with pvrusb2. Got it working on 32 bit Ubuntu 8.04, 8.1, 9.04. Video0 shows up, can select tuner inputs, video works, sound works, life was great. Fooled with Myth for a while mostly up and going but decided to buy Sage TV. Got it working, able to switch between HVR-1950 and Homeun tuner all is good. Decided to upgrade to 64 bit ( work is moving to 64 bit linux and I am on a amd chip and it seemed over all faster ). Same drill got things going again, tried vlc /dev/video0 and video and sound work great. Installed SageTV ( they need to run on 32 bit java but easy enough to download a 32 bit jvm and run it ). SageTV comes up able to configure HD-Homerun ... then the issue. /dev/video0 and adapter0 both appear but if I choose adapter0 I get the choice to choose a Digital Tuner. Digital side must be grabbing the card If I choose video0 however... no choices and SageTV won't continue. Tried MythTV same thing no choices under video0. Checked out crtl_input and sure enough cur_val is set to dvb. the default is set to 0. Check 32 bit linux cur_val = television and default 4096. Can't set default its readonly? Try to set cur_val to television .. SageTV still does not show devices. Check enum and its got the right values. Ok I am Stumped.
Any ideas on things I can try to get the devices to show. Mike... _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
