Hello,
I have a 29xxx WinTV PVR2 USB device and I'm trying to get it working
on my desktop box. It's running self-compiled mainline 2.6.30 AMD64
kernel on Debian unstable. So far I haven't been able to get the device
working.
The firmware has been downloaded by installing firmware-ivtv .deb
package.
I have earlier tested the mainline kernel 2.6.30 pvrusb2 module, no luck.
Today I checked out v4l-dvb via Hg, compiled, installed, then downloaded
pvrusb2-mci-20091124, pointed V4LDIR to the fresh checkout, compiled,
installed pvrusb2.ko and moved away the old module. No luck with the
fresh stuff either.
The symptoms are always the same. When I connect power to the device, I
see this in syslog:
Nov 26 22:33:25 hanuri kernel: hub 1-0:1.0: unable to enumerate USB device on
port 4
Nov 26 22:33:25 hanuri kernel: usb 2-4: new full speed USB device using
ohci_hcd and address 15
Nov 26 22:33:25 hanuri kernel: usb 2-4: not running at top speed; connect to a
high speed hub
Nov 26 22:33:25 hanuri kernel: usb 2-4: New USB device found, idVendor=2040,
idProduct=2900
Nov 26 22:33:25 hanuri kernel: usb 2-4: New USB device strings: Mfr=0,
Product=0, SerialNumber=0
Nov 26 22:33:25 hanuri kernel: usb 2-4: configuration #1 chosen from 1 choice
Nov 26 22:33:25 hanuri kernel: pvrusb2: Hardware description: WinTV PVR USB2
Model 29xxx
Nov 26 22:33:25 hanuri kernel: usb 2-4: firmware: requesting
v4l-pvrusb2-29xxx-01.fw
Nov 26 22:33:26 hanuri kernel: pvrusb2: Device microcontroller firmware
(re)loaded; it should now reset and reconnect.
Nov 26 22:33:26 hanuri kernel: usb 2-4: USB disconnect, address 15
Nov 26 22:33:26 hanuri kernel: pvrusb2: Device being rendered inoperable
Nov 26 22:33:27 hanuri kernel: usb 1-4: new high speed USB device using
ehci_hcd and address 116
Then nothing happens, ever. I've tested with different cables and
different USB ports and USB hubs but the end result is always the same.
The device works when I connect it to my laptop (running Debian unstable
running Debian kernel 2.6.31-1-686). The firmware files are identical on
both computers (MD5SUM of v4l-pvrusb2-29xxx-01.fw matches).
Any ideas what could be wrong? Or, if you need any furher info, I'll
gladly provide whatever you need.
Thanks.
--
// http://www.pyksy.fi/ // pyksy @IrcNet //
_______________________________________________
pvrusb2 mailing list
[email protected]
http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
