Robert: Thank you for getting this working AND letting everyone else know!
-Mike On Sun, 26 Sep 2010, Robert J. Lynn, Jr. wrote: > Hi guys, > > I just got an email back from Mike Isely after I let him know I was able to > get my HVR-1950's IR remote working. I haven't worked on the blaster as I > don't need it for my configuration. He asked me to let the mailing list know > how I got it working, so that Google picks it up. > > I'm using mythbuntu and had to do some hackery to get it to let me build a > working module. I had to build my own kernel to get the driver to build > correctly, but I'm assuming, if you've made it this far, you can figure out > how to compile the driver. > > After getting the latest driver snapshot (20100708) from the pvrusb2 > website, I built and installed the module, loading it no options (as it > happens, I gave Mike incorrect instructions, you /don't/ need to tell it to > disable the ir_kbd_i2c driver. > > Next, I downloaded the latest lirc driver from their website, 0.8.7, release > 9/6/2010. After building it, I loaded the lirc_i2c module, and you should > see the following in dmesg: > > [ 24.412548] lirc_dev: IR Remote Control driver registered, major 61 > [ 27.599989] lirc_i2c: chip 0x0 found @ 0x71 (Hauppauge PVR150) > [ 27.599998] lirc_dev: lirc_register_driver: sample_rate: 10 > > Use the Hauppauge lircd.conf. I don't know if it came from the driver > itself, or if it was left over from the Mythbuntu lirc package. It sees the > remote as the gray HVR-350 remote. > > The remote is now working perfectly in both xbmc and mythtv. Good luck! > _______________________________________________ > pvrusb2 mailing list > [email protected] > http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2 > -- Mike Isely isely @ isely (dot) net PGP: 03 54 43 4D 75 E5 CC 92 71 16 01 E2 B5 F5 C1 E8 _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
