Hello Mike!
Last weekend the 2.6.37 has become available for my ArchLinux distro and
I wanted to try whether my patch resolved the issues I had with the
Terratec Grabster AV400.
So I updated my system, downloaded your newest snapshot (for the record:
pvrusb2-mci-20110116) and built it. I've manually copied the resulting
module to $modulesdir/updates and run "depmod -a". Then I plugged in my
device and its light was red first, switched to green and back to red
(so far so good), but then it remained red. So I looked at "dmesg" and
saw that pvrusb2 wasn't even reacting. After some searching around I
noticed that my distro switched to gzipped kernel modules and "depmod"
always seemed to pick the default .gz one. What a wunderful move. -.-
Not giving up that fast I simply renamed the default module and run
"depmod" again. Now the correct module was picked up and inserting the
device resulted in a green light after the second red one, but there was
no /dev/video node. So I checked "dmesg" again and to my horror I saw a
stacktrace:
==== dmesg content ====
usb 1-5: new high speed USB device using ehci_hcd and address 6
Linux video capture interface: v2.00
pvrusb2: Hardware description: Terratec Grabster AV400
pvrusb2: **********
pvrusb2: WARNING: Support for this device (Terratec Grabster AV400) is
experimental.
pvrusb2: Important functionality might not be entirely working.
pvrusb2: Please consider contacting the driver author to help with
further stabilization of the driver.
pvrusb2: **********
usb 1-5: USB disconnect, address 6
usbcore: registered new interface driver pvrusb2
pvrusb2: 20110116 (from www.isely.net):Hauppauge WinTV-PVR-USB2 MPEG2
Encoder/Tuner
pvrusb2: Debug mask is 31 (0x1f)
pvrusb2: Failed to submit write-control URB status=-19
pvrusb2: Device being rendered inoperable
pvrusb2: ***WARNING*** pvrusb2 device hardware appears to be jammed and
I can't clear it.
pvrusb2: You might need to power cycle the pvrusb2 device in order to
recover.
usb 1-5: new high speed USB device using ehci_hcd and address 7
pvrusb2: Hardware description: Terratec Grabster AV400
pvrusb2: **********
pvrusb2: WARNING: Support for this device (Terratec Grabster AV400) is
experimental.
pvrusb2: Important functionality might not be entirely working.
pvrusb2: Please consider contacting the driver author to help with
further stabilization of the driver.
pvrusb2: **********
cx25840 6-0044: cx25837-3 found @ 0x88 (pvrusb2_a)
------------[ cut here ]------------
kernel BUG at drivers/media/video/v4l2-ctrls.c:1143!
invalid opcode: 0000 [#1] PREEMPT SMP
last sysfs file:
/sys/devices/pci0000:00/0000:00:02.2/usb1/1-5/i2c-6/6-0044/uevent
CPU 1
Modules linked in: cx25840 pvrusb2 dvb_core cx2341x v4l2_common videodev
v4l1_compat v4l2_compat_ioctl32 tveeprom ipv6 xfs exportfs ext2 radeon
snd_emu10k1 snd_intel8x0 ohci_hcd snd_rawmidi snd_ac97_codec ttm
drm_kms_helper ac97_bus snd_seq_dummy skge ehci_hcd snd_seq_oss
snd_seq_midi_event snd_seq snd_util_mem snd_seq_device snd_pcm_oss
snd_hwdep snd_mixer_oss snd_pcm snd_timer emu10k1_gp drm i2c_algo_bit
shpchp snd i2c_nforce2 soundcore usbcore processor pci_hotplug i2c_core
parport_pc snd_page_alloc floppy serio_raw button psmouse ns558
edac_core ppdev k8temp edac_mce_amd evdev sg analog lp gameport pcspkr
parport ext4 mbcache jbd2 crc16 sd_mod sr_mod cdrom sata_nv pata_acpi
sata_sil24 pata_amd libata scsi_mod raid1 md_mod
Pid: 2184, comm: pvrusb2-context Not tainted 2.6.37-ARCH #1 nForce/
RIP: 0010:[<ffffffffa020b352>] [<ffffffffa020b352>]
v4l2_ctrl_cluster+0x32/0x40 [videodev]
RSP: 0018:ffff880033c61a30 EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff880038065800 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffff880039de1ee0 RDI: 0000000000000002
RBP: ffff880033c61a30 R08: 2222222222222222 R09: 2222222222222222
R10: 0000000000000000 R11: 0000000000000000 R12: ffff880039de1e78
R13: 0000000000008373 R14: ffff880039de1e00 R15: 00000000000000ed
FS: 00007f05b98a8700(0000) GS:ffff88003fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007fff6c8c5fe0 CR3: 000000003c89b000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process pvrusb2-context (pid: 2184, threadinfo ffff880033c60000, task
ffff88003f8ada30)
Stack:
ffff880033c61aa0 ffffffffa0310b99 ffff880000000000 ffff88003c99e3fc
ffff880033c61ab0 ffffffff00000000 0000000000000200 ffff880039de1e08
ffff880033c61ac0 ffff880038065828 ffffffffa0318590 ffffffffa0318540
Call Trace:
[<ffffffffa0310b99>] cx25840_probe+0x479/0x840 [cx25840]
[<ffffffffa0308694>] i2c_device_probe+0x94/0xd0 [i2c_core]
[<ffffffff812b0f0a>] ? driver_sysfs_add+0x7a/0xb0
[<ffffffff812b11e6>] driver_probe_device+0x96/0x1c0
[<ffffffff812b13b0>] ? __device_attach+0x0/0x60
[<ffffffff812b13fb>] __device_attach+0x4b/0x60
[<ffffffff812afdd4>] bus_for_each_drv+0x64/0x90
[<ffffffff812b107f>] device_attach+0x8f/0xb0
[<ffffffff812b0805>] bus_probe_device+0x25/0x40
[<ffffffff812ae574>] device_add+0x4e4/0x5c0
[<ffffffff812ba941>] ? pm_runtime_init+0xd1/0xe0
[<ffffffff812ae669>] device_register+0x19/0x20
[<ffffffffa03091d5>] i2c_new_device+0x145/0x250 [i2c_core]
[<ffffffffa00b77b6>] v4l2_i2c_new_subdev_board+0x96/0x240 [v4l2_common]
[<ffffffffa00b79e3>] v4l2_i2c_new_subdev_cfg+0x83/0xb0 [v4l2_common]
[<ffffffffa0363760>] ? pvr2_context_notify+0x0/0x10 [pvrusb2]
[<ffffffffa0363760>] ? pvr2_context_notify+0x0/0x10 [pvrusb2]
[<ffffffffa035b606>] pvr2_hdw_initialize+0x346/0x1060 [pvrusb2]
[<ffffffffa036394b>] pvr2_context_thread_func+0x9b/0x320 [pvrusb2]
[<ffffffffa03638b0>] ? pvr2_context_thread_func+0x0/0x320 [pvrusb2]
[<ffffffff81077db0>] ? autoremove_wake_function+0x0/0x40
[<ffffffff813a6dc2>] ? _raw_spin_unlock_irqrestore+0x32/0x40
[<ffffffffa03638b0>] ? pvr2_context_thread_func+0x0/0x320 [pvrusb2]
[<ffffffff81077826>] kthread+0x96/0xa0
[<ffffffff8100cd24>] kernel_thread_helper+0x4/0x10
[<ffffffff81077790>] ? kthread+0x0/0xa0
[<ffffffff8100cd20>] ? kernel_thread_helper+0x0/0x10
Code: e5 74 28 31 c0 85 ff 74 20 48 63 d0 48 8d 14 d6 48 8b 0a 48 85 c9
74 0a 48 89 71 18 48 8b 12 89 7a 20 83 c0 01 39 f8 72 e0 c9 c3 <0f> 0b
66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 c7 c2 e0 ff 20
RIP [<ffffffffa020b352>] v4l2_ctrl_cluster+0x32/0x40 [videodev]
RSP <ffff880033c61a30>
---[ end trace f2fe4d11aa83a3aa ]---
==== dmesg content ====
This is so not good...
Being a bit creative I've also tried adding the AV400 code to an
in-kernel source to check whether the problem lies in your snapshot, the
2.6.37 drivers in general or some real bad luck. I installed the
compiled module, but I got basically the same backtrace as with your
snapshot.
Do you have any idea what this might be or should I ask on the
linux-media list?
The device used to function without problems on 2.6.35 with a patched
cx25840 module for months.
Regards,
Sven
_______________________________________________
pvrusb2 mailing list
[email protected]
http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
