Tomas: Your kernel is probably too old. While I obviously can't know what might have been backported by the distro vendor, here's a general guide for generic kernel versions:
http://www.isely.net/pvrusb2/setup.html#Prerequisites In particular, though the pvrusb2 driver has been in the kernel tree since 2.6.18, and you could certainly compile the standalone driver for an even older kernel, the problem you are going to have is DVB support in general and specific support for the tuner that's in your HVR-1950. Those are pieces that are outside of the pvrusb2 driver that you need for the HVR-1950 to work at all. And that means that you need to move up to at least kernel version 2.6.26. Unfortunately the tuner driver in v4l-dvb that your HVR-1950 needs has undergone a lot of thrashing and I think Hauppauge may have even changed out the part at some point. That all means that you may need an even *more* recent kernel before it's going to work. But certainly ancient kernels like 2.6.18 or 2.6.20 just aren't going to work for what you need to do :-( -Mike -- Mike Isely isely @ isely (dot) net PGP: 03 54 43 4D 75 E5 CC 92 71 16 01 E2 B5 F5 C1 E8 _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
