Greetings, I have two WinTV PVR USB '24xxx' boxes I'm using with the pvrusb2 driver which feed into tvheadend to stream PAL cable channels to xbmc. The set up works but I always get the first tuned channel in black & white and have to tune to one (or more) different channels and then go back to the original channel get colour. Occasionally a channel will later go black and white again and I must apply the same fix.
Could this be a driver problem, hardware problem, or fine-tuning problem?? I saw a post from 2006 that describes a similar issue using NTSC: http://www.isely.net/pipermail/pvrusb2/2006-January/000384.html I'm running Ubuntu server 10.10 64-bit with the driver from linux-s2api-tbs6980-1_20101024 (commercial mod for the Tenow International TBS6981 dual satellite card) in which I made a small modification to set: .pixelformat = V4L2_PIX_FMT_MPEG, ...in the pvrusb2-v4l2.c file in order for tvheadend to recognise it as a valid source. Since both boxes behave the same way, I suspect this is an issue with the driver. What can I do to debug the issue further? Thanks, Tom -- _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
