Remember that xawtv3 does not work with capture devices that emit mpeg video. Remember also that xawtv4 must be compiled to include mpeg support for it to have any chance at video capture. These details have been documented all along here:
http://www.isely.net/pvrusb2/usage.html#xawtv The xawtv app is really old and I'm not even sure if anyone is maintaining it any longer. You might want to consider TV-Viewer as an alternative for the analog side: http://www.isely.net/pvrusb2/usage.html#TV-Viewer -Mike On Tue, 22 Nov 2011, Roger wrote: > >pvrusb2: firmware2 upload transfer failure > >pvrusb2: Clearing driver error statuss > >pvrusb2: firmware2 upload transfer failure > >pvrusb2: Clearing driver error statuss > >pvrusb2: firmware2 upload transfer failure > >pvrusb2: Clearing driver error statuss > > Never mind on the above. Looks like xawtv left things quite unstable for > some > reasons. Hard reset the device and things look good again. I can do cat > /dev/video0 without problems. (Albeit, a black screen.) > > # cat /sys/class/pvrusb2/sn-6202710/ctl_input/cur_val > television > > # echo "211250" > > /sys/class/pvrusb2/sn-6202710/ctl_freq_table_channel/cur_val > -su: echo: write error: Numerical result out of range > > Now I'm stumped. > > -- Mike Isely isely @ isely (dot) net PGP: 03 54 43 4D 75 E5 CC 92 71 16 01 E2 B5 F5 C1 E8 _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
