Hi all, Thanks for all your suggestions. I've now made it work.
On 2012-03-30 18:47, Reinhold Kainhofer wrote:
I have successfully cross-compiled the standalone pvrusb2 module for the 2.6.22 kernel[1] used in my D-Link DNS-325 NAS, because I intend to use the WinTV HVR-1900 as a HDD video recorder (recording from the analog output of my settop box). Loading the modules works fine (v4l modules from the 2.6.22 Kernel plus the pvrusb2 module), but apparently loading the firmware fails, although I placed the correct file in /lib/firmware/
Actually, it turned out that D-Link had completely removed the firmware loading from their hotplug scripts. In particular, I had to create a proper /etc/hotplug/firmware.agent to make it work. It then turned out that sysfs was not mounted, so I had to add sysfs mounting to that script too. After that, things work just fine now.
(This work was further complicated by the fact that while I had write access to the root partition, I only had shell access to a chrooted environment, so things like /proc/kcore were not available).
So, this is just to confirm that my HVR-1900 is working fine on my D-Link DNS-325 NAS on kernel 2.6.22.
Cheers, Reinhold -- ------------------------------------------------------------------ Reinhold Kainhofer, [email protected], http://reinhold.kainhofer.com/ * Financial& Actuarial Math., Vienna Univ. of Technology, Austria * http://www.fam.tuwien.ac.at/, DVR: 0005886 * LilyPond, Music typesetting, http://www.lilypond.org _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
