Change from TV Broadcast to Composite:

# echo "composite" >/sys/class/pvrusb2/*/ctl_input/cur_val


> On Wed, Aug 28, 2013 at 12:48:17PM -0700, Lorne Shantz wrote:
>
>
>
>
>________________________________
> It has been awhile since I've done any bash prompt commands, but before that, 
> I have to tell it what to capture first. IE: right this moment, the unit is 
> set to watch TV, so it is just capturing what ever channel is on, and not the 
> Tape. I'm pretty sure I can pass that on to it though. Good advice. I'll have 
> to go try to find that on the web somewhere. 
>
>From: Martin Dauskardt <[email protected]>
>To: [email protected] 
>Sent: Wednesday, August 28, 2013 11:04 AM
>Subject: Re: [pvrusb2] WinTV USB2/Tv-Viewer question
> 
>
>try it without tv-viewer simply by using the command
>
>cat /dev/video0 > test.mpg
>
>
>while the VCR is playing.
>
>Then open the test.mpg file with vlc. You can watch it while it is 
>recording.
>
>Let' s see if this recording works or if again any encoder command 
>errors appear
>
>You can check this in another console with
>
>tail -f /var/log/syslog
>
>> I have done some more tinkering... It seems to be related to the composite 
>> cables coming from the vcr player. ? Tv-viewer would not play. I'm getting a 
>> lot of this below:
>>
>>
>> [19727.089020] pvrusb2: ***WARNING*** device's encoder appears to be stuck 
>> (status=0x00000003)
>> [19727.089023] pvrusb2: Encoder command: 0x81
>> [19727.089024] pvrusb2: Giving up on command.? This is normally recovered 
>> via a firmware reload and re-initialization; concern is only warranted if 
>> this happens repeatedly and rapidly.
>>
>>
>
>_______________________________________________
>pvrusb2 mailing list
>[email protected]
>http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
>_______________________________________________
>pvrusb2 mailing list
>[email protected]
>http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
_______________________________________________
pvrusb2 mailing list
[email protected]
http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2

Reply via email to