If it really is heat related a simple test can be done: aim a fan at 
it...

If the problem is the power brick, a fan of course won't help.

  -Mike


On Sat, 16 Mar 2019, Diego Rivera wrote:

> No, but thanks for the info!! The devices (yes, it's two of them ☺) do seem 
> to run a little hot so
> that may be a factor here on why they're hanging. I'll also look into getting 
> them a decent power
> supply.
> Cheers!
> 
> On Sat, 2019-03-16 at 16:48 +0000, Gary Buhrmaster wrote:
> > On Sat, Mar 16, 2019 at 4:06 PM Diego Rivera <[email protected]> 
> > wrote:
> >  Every so often one of the devices ceases to function and just "dies".
> > It has been a long long time since I touched one ofthose, but I would 
> > always look at the root
> > causesof the hangs first.....
> > The two most common issues with the HVR-1950that I ran into is that it can 
> > overheat (and hang)and
> > the power supply can be going bad (and thedevice hangs).
> > For the first, I found avoiding stacking them (whichI had been doing) was 
> > sufficient to avoid
> > overheating(although your location may vary and you may needactive 
> > airflow), and for the second, I
> > replaced thepower adapter.  FWIW, I don't think any of thepower adapters 
> > that I ever got from
> > Hauppaugewere of good quality, and I usually just replaced thempro-actively 
> > with a high quality
> > switching supply(at the time I had a local source of delta brandedoem 
> > switching supplies that were
> > dirt cheap andnew in box).  Note that you typically can't just usea VOM on 
> > the adapter to test,
> > you have to put theadapter under load and look at the ripple.  Usuallyjust 
> > easier to replace the
> > power supply.
> > And none of this was actually in response tothe question you
> > asked..._______________________________________________pvrusb2 mailing 
> > [email protected]
> > http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
> 

-- 

Mike Isely
isely @ isely (dot) net
PGP: 03 54 43 4D 75 E5 CC 92 71 16 01 E2 B5 F5 C1 E8
_______________________________________________
pvrusb2 mailing list
[email protected]
http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2

Reply via email to