modprobe -v pwc
=-=-=-=-=-=-=-=-=
pwc: Philips webcam module version 10.0.11-unofficial loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
usbcore: registered new driver Philips webcam
*************** Ok this is good, now when the ohci module is loaded....
modprobe -v ohci_hcd
=-=-=-=-=-=-=-=-=-=-=-=
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 80 td 96
ohci_hcd 0000:01:00.0: OHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:01:00.0: irq 161, io mem 0xfeaf9000
ohci_hcd 0000:01:00.0: resetting from state 'reset', control = 0x600
ohci_hcd 0000:01:00.0: enabling initreset quirk
ohci_hcd 0000:01:00.0: OHCI controller state
ohci_hcd 0000:01:00.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:01:00.0: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:01:00.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:01:00.0: intrstatus 0x00000004 SF
ohci_hcd 0000:01:00.0: intrenable 0x8000000a MIE RD WDH
ohci_hcd 0000:01:00.0: hcca frame #0003
ohci_hcd 0000:01: 00.0: roothub.a 01001203 POTPGT=1 NOCP NPS NDP=3(3)
ohci_hcd 0000:01:00.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:01:00.0: roothub.status 00008000 DRWE
ohci_hcd 0000:01:00.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:01:00.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:01:00.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:01:00.0: created debug files
ohci_hcd 0000:01:00.0: supports USB remote wakeup
usb usb2: default language 0x0409
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16-rc2 ohci_hcd
usb usb2: SerialNumber: 0000:01: 00.0
usb usb2: uevent
usb usb2: device is self-powered
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: no over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:01:00.1: OHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:01:00.1: irq 161, io mem 0xfeafa000
ohci_hcd 0000:01:00.1: resetting from state 'reset', control = 0x600
hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
ohci_hcd 0000:01:00.1: OHCI controller state
ohci_hcd 0000:01:00.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:01:00.1: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:01:00.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:01:00.1: intrstatus 0x00000044 RHSC SF
ohci_hcd 0000:01:00.1: intrenable 0x8000000a MIE RD WDH
ohci_hcd 0000:01:00.1: hcca frame #0003
ohci_hcd 0000:01:00.1: roothub.a 01001203 POTPGT=1 NOCP NPS NDP=3(3)
ohci_hcd 0000:01:00.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:01:00.1: roothub.status 00008000 DRWE
ohci_hcd 0000:01:00.1: roothub.portstatus [0] 0x00010301 CSC LSDA PPS CCS
ohci_hcd 0000:01:00.1: roothub.portstatus [1] 0x00010101 CSC PPS CCS
ohci_hcd 0000:01:00.1: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:01:00.1: created debug files
ohci_hcd 0000:01:00.1: supports USB remote wakeup
usb usb3: default language 0x0409
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16-rc2 ohci_hcd
usb usb3: SerialNumber: 0000:01:00.1
usb usb3: uevent
usb usb3: device is self-powered
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: no over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:01:07.0: OHCI Host Controller
drivers/usb/core/inode.c: creating file '004'
ohci_hcd 0000:01:07.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:01:07.0: irq 153, io mem 0xfeafc000
ohci_hcd 0000:01:07.0: resetting from state 'reset', control = 0x0
hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
ohci_hcd 0000:01:00.1: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
ohci_hcd 0000:01:07.0: OHCI controller state
ohci_hcd 0000:01:07.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:01: 07.0: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:01:07.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:01:07.0: intrstatus 0x00000004 SF
ohci_hcd 0000:01:07.0: intrenable 0x8000001a MIE UE RD WDH
ohci_hcd 0000:01: 07.0: hcca frame #01ff
ohci_hcd 0000:01:07.0: roothub.a ff000203 POTPGT=255 NPS NDP=3(3)
ohci_hcd 0000:01:07.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:01:07.0: roothub.status 00008000 DRWE
ohci_hcd 0000:01: 07.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:01:07.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:01:07.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:01:07.0: created debug files
usb usb4: default language 0x0409
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.16-rc2 ohci_hcd
usb usb4: SerialNumber: 0000:01: 07.0
usb usb4: uevent
usb usb4: device is self-powered
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: global over-current protection
hub 4-0:1.0: power on to power good time: 510ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: no over-current condition exists
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
ohci_hcd 0000:01: 00.1: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-1: new low speed USB device using ohci_hcd and address 2
ohci_hcd 0000:01:00.1: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-1: skipped 1 descriptor after interface
usb 3-1: default language 0x0409
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: PS2/USB Browser Combo Mouse
usb 3-1: Manufacturer: Cypress Sem
usb 3-1: uevent
usb 3-1: device is bus-powered
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: uevent
usbhid 3-1:1.0: usb_probe_interface
usbhid 3-1:1.0: usb_probe_interface - got id
input: Cypress Sem PS2/USB Browser Combo Mouse as /class/input/input4
input: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-0000:01:00.1-1
drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:01:00.1: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCShub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
ohci_hcd 0000:01: 00.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:01:07.1: OHCI Host Controller
drivers/usb/core/inode.c: creating file '005'
ohci_hcd 0000:01: 07.1: new USB bus registered, assigned bus number 5
ohci_hcd 0000:01:07.1: irq 161, io mem 0xfeafd000
ohci_hcd 0000:01:07.1: resetting from state 'reset', control = 0x0
usb 3-2: new full speed USB device using ohci_hcd and address 3
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:07.1: OHCI controller state
ohci_hcd 0000:01:07.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:01:07.1: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:01:07.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:01:07.1: intrstatus 0x00000004 SF
ohci_hcd 0000:01:07.1: intrenable 0x8000001a MIE UE RD WDH
ohci_hcd 0000:01:07.1: hcca frame #01ff
ohci_hcd 0000:01:07.1: roothub.a ff000202 POTPGT=255 NPS NDP=2(2)
ohci_hcd 0000:01:07.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:01:07.1: roothub.status 00008000 DRWE
ohci_hcd 0000:01:07.1: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:01:07.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:01:07.1: created debug files
usb usb5: default language 0x0409
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.16-rc2 ohci_hcd
usb usb5: SerialNumber: 0000:01:07.1
usb usb5: uevent
usb usb5: device is self-powered
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: global over-current protection
hub 5-0:1.0: power on to power good time: 510ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: no over-current condition exists
ohci_hcd 0000:01:00.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 3-2: device descriptor read/64, error -110
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:00.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 3-2: device descriptor read/64, error -110
ohci_hcd 0000:01:00.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 3-2: new full speed USB device using ohci_hcd and address 4
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:01:00.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
On 3/9/06, Lorenzo Milesi <
[EMAIL PROTECTED]> wrote:
I've used it some times (gentoo amd64)...
cheers
maxxer
_______________________________________________
pwc mailing list
[email protected]
http://lists.saillard.org/mailman/listinfo/pwc
_______________________________________________ pwc mailing list [email protected] http://lists.saillard.org/mailman/listinfo/pwc
