HI Yes you can keep pcheun05.dyndns.org for my main jabber id as far as pcheun05.dyndns.org is pointing to your own computer IP address.
As for the IP, do I have to put the actual numeric IP or would pcheun05.dyndns.org suffice Either of them should work. I use it with the IP. Vishal On Sep 22, 6:46 pm, "Peter Cheung" <[EMAIL PROTECTED]> wrote: > I'm running it out of my own computer. I don't have a domain, but I do have > a dynamic dns service set up as pcheun05.dyndns.org. Should I put > aim.pcheun05.dyndns.org as my JabberID and pcheun05.dyndns.org for my main > jabber id? As for the IP, do I have to put the actual numeric IP or would > pcheun05.dyndns.org suffice? I've done all this before and somehow I can't > get it working, but I'm willing to keep trying. > > > > On Mon, Sep 22, 2008 at 6:30 AM, Vishal <[EMAIL PROTECTED]> wrote: > > > HI > > > As far as I understand Following changes: > > > 1 <!-- The JabberID of the transport. --> > > <jid>aim.YourDomain.com</jid> > > > 2. example.org should be replaced by YourDomain.com > > > 3 <!-- The IP address of the main Jabber server --> > > <mainServer>Actual IP of YourDomain.com</mainServer> > > > 4 <!-- The JID of the main Jabber server --> > > <mainServerJID>YourDomain.com</mainServerJID> > > > Vishal > > > On Sep 22, 6:24 pm, "Peter Cheung" <[EMAIL PROTECTED]> wrote: > > > <!-- The JabberID of the transport. --> > > > <jid>127.0.0.1</jid> > > > > <!-- The JabberID of the conference room handler. --> > > > <!-- GROUPCHAT IS NOT STABLE YET --> > > > <confjid>chatrooms.aim.example.org</confjid> > > > > <!-- The component JID of the transport. Unless you're doing > > > clustering, leave this alone --> > > > <!-- <compjid>aim1</compjid> --> > > > > <!-- The location of the spool directory.. if relative, relative > > to > > > --> > > > <!-- this directory. Do not include the jid of the transport. > > --> > > > <spooldir>.</spooldir> > > > > <!-- The location of the PID file.. if relative, relative to this > > > dir. --> > > > <!-- Comment out if you do not want a PID file --> > > > <!-- <pid>PyAIMt.pid</pid> --> > > > > <!-- The IP address of the main Jabber server --> > > > <mainServer>127.0.0.1</mainServer> > > > > <!-- The JID of the main Jabber server --> > > > <mainServerJID>127.0.0.1</mainServerJID> > > > > <!-- The website of the Jabber service --> > > > <website>http://jabber.localhost/</website> > > > > <!-- The TCP port to connect to the Jabber server on --> > > > <!-- (this is the default for Jabberd2) --> > > > <port>5347</port> > > > > <!-- The TCP port that the web admin interface will answer on --> > > > <!-- (uncomment to enable) --> > > > <!-- <webport>5280</webport> --> > > > > <!-- The authentication token to use when connecting to the > > Jabber > > > server --> > > > <secret>secret</secret> > > > > On Mon, Sep 22, 2008 at 4:07 AM, Vishal <[EMAIL PROTECTED]> wrote: > > > > > Hi > > > > > Post your config file here. > > > > > Vishal > > > > > On Sep 22, 12:01 pm, pete <[EMAIL PROTECTED]> wrote: > > > > > I'm trying to setup an ejabberd server with pyaimt transport on > > > > > ubuntu. My ultimate goal is to be able to have a discoverable AIM > > > > > transport server so I can use googletalk to talk with people on AIM. > > > > > The reason for this is because I use a blackberry and googletalk is > > > > > the only decent chat program that the blackberry supports. The > > current > > > > > AIM transport jabber server that I'm using disconnects a lot, so I'm > > > > > thinking about making my own. > > > > > > I have ejabberd up and running. I'm able to connect to it with Psi > > > > > using my admin account, however, I can't seem to get PyAIMt setup > > > > > correctly. Everytime I use Psi to discover service on my server I'm > > > > > unable to find any AIM transport services. If I want to host a server > > > > > on my computer, can I just set the JID as 127.0.0.1, with main > > jabber > > > > > server IP/ID as 127.0.0.1 as well? That's what I have it set to so > > > > > far. Any help would be appreciated. Thanks a lot for your time.- Hide > > quoted text - > > > > - Show quoted text -- Hide quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "py-transports" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/py-transports?hl=en -~----------~----~----~----~------~----~------~--~---
