Hi Tomasz, thank you for your response.
2013/11/9 Tomasz Rybak <[email protected]>: > I've just tested on GeForce 460 with CUDA 5.5 and drivers 325.15, > and your example worked without any problems - kernel was stopped > at doublify. Interesting. I test every so often, and unfortunately there is no change. > I assume that you have installed all programs (drivers, CUDA, PyCUDA) > from Debian repositories, or have you downloaded, compiled and > installed something yourself? All from debian repos. > What hardware are you running it on? > And, which might be the stupid question, were you running > this from X or from console? Anything card below Kepler with Compute > Capabilities 3.5 cannot at the same time be used to display X > and to debug. So if you have only one card which you use for > displaying your X session on monitor, you cannot use the same > card for debugging. This might explain problems you described. Not the case here. Any other ideas, missing debuginfo somewhere, problems with multi-arch stuff? Regards, Vedran > Best regards. > > -- > Tomasz Rybak GPG/PGP key ID: 2AD5 9860 > Fingerprint A481 824E 7DD3 9C0E C40A 488E C654 FB33 2AD5 9860 > http://member.acm.org/~tomaszrybak > _______________________________________________ PyCUDA mailing list [email protected] http://lists.tiker.net/listinfo/pycuda
