Daniel,
After you load the file onto the IBB what kind of prompt are you
getting after you push the start button. You should be getting a
clear screen. Are you sure that the bluetooth pairing went okay? We
found that the IBB doesn't support hardware handshaking, if you can't
disable it then you need to "spoof" it. The directions are on the
wiki. If that doesn't help could you tell us exactly which steps you
are taking?
- James
Douglas Blank wrote:
Daniel,
I've just received my Intellibrainbot Bluetooth myself, so I'll try
this
too. Perhaps our Potsdam colleagues may have some suggestions?
-Doug
Daniel Brian Myers wrote:
Hi, I am using a bluetooth connection with an Intellibrain robot.
I can
connect to the robot with no problems, but when I try to move it, it
doesn't do anything. According to the directions, there is a file
called
IBB.java that needs to be sent to the robot, so I opened the file
in the
RoboJDE software and compiled and loaded it to the flash memory on
the
robot. Is there something I'm missing or did I just do something
wrong?
Thanks,
Daniel
_______________________________________________
Pyro-users mailing list
[email protected]
http://emergent.brynmawr.edu/mailman/listinfo/pyro-users
