as a 1st test of this pyside build, a downstream build of
Pyside&Shiboken-dependent FreeCAD, using the install described in this^ thread,
with config including
...
-DPySide2_DIR=/usr/local/lib/cmake/PySide2-5.14.1 \
-DShiboken2_DIR=/usr/local/lib/cmake/Shiboken2-5.14.1 \
-DPYSIDE2RCCBINARY=/usr/local/bin/rcc \
-DPYSIDE2UICBINARY=/usr/local/bin/uic \
...
_does_ complete without apparent error
FreeCAD --version
FreeCAD 0.19 Revision: 19717 (Git)
ldd `which FreeCAD` | egrep -i "pyside|shiboken|pivy"
libpyside2.cpython-38-x86_64-linux-gnu.so.5.14 =>
/usr/local/lib/libpyside2.cpython-38-x86_64-linux-gnu.so.5.14
(0x00007f7f2ca10000)
libshiboken2.cpython-38-x86_64-linux-gnu.so.5.14 =>
/usr/local/lib/libshiboken2.cpython-38-x86_64-linux-gnu.so.5.14
(0x00007f7f2c7c5000)
(again, note libs are in wrong-arch libdirs, /lib not /lib64 ...)
on launch, the app _does_ start, and seems nominally functional.
non-fatal launch errors include,
During initialization the error "No module named 'PySide2'" occurred in
/usr/local/FreeCAD/Mod/Tux/InitGui.py
Please look into the log file for further information
During initialization the error "No module named 'PySide2'" occurred in
/usr/local/FreeCAD/Mod/AddonManager/InitGui.py
Please look into the log file for further information
During initialization the error "No module named 'PySide2'" occurred in
/usr/local/FreeCAD/Mod/Draft/InitGui.py
Please look into the log file for further information
Error: Pivy not found, Draft Workbench will be disabled.
Unknown command 'Std_AddonMgr'
I _suspect_ those are FreeCAD-config related; for later
_______________________________________________
PySide mailing list
PySide@qt-project.org
https://lists.qt-project.org/listinfo/pyside
