Paul So now it finds the files, but gives compilation errors, if I understand well. Can you send us the output that it generates, so that we can have a look at the error messages.
wbr Emmanuel On Mon, 2010-06-21 at 15:02 -0500, Paul Robinson wrote: > Hello, Emmanuel. > > Such quick responses! Many thanks. > > I've installed all the appropriate packages; the only errors I'm > getting now are from npy_common.h (/usr/include/numpy/npy_common.h) > and ndarrayobject.h (also in /usr/include/numpy). The error messages > concern npy_cdouble, npy_cfloat, and npy_clongdouble (lines 120, 127, > 134 of npy_common.h); and "conflicting declaration 'typedef struct > [same data types] ...' "(lines 131, 132, 124, 133 of ndarrayobject.h). > > I feel I'm getting close... > > Again, many thanks! > > Cheers, > Paul Robinson > > On Mon, Jun 21, 2010 at 2:46 PM, <[email protected]> wrote: > Hello Paul > > -Can you check one by one the packages mentioned in the README > file attached? > Have you installed all of these with "sudo apt-get install" ? > If you still experience this problem after that, then locate > the file npy_common.h on your PC and let me know the path. > > -We have not tested with SWIG 2.0, but the error message you > mention doesn't have to do with that. However, I think it is > safer to use SWIG 1.3.39 for now. > > Let us know how it is going. > > regards > Emmanuel > > > > > > > Quoting "Nizamov Shawkat" <[email protected]>: > > > > meep_wrap.cpp:150:20: error: Python.h: No such > file or directory > Most probably, you simply do not have python-dev > packages installed. > > custom.hpp:39:30: error: numpy/npy_common.h: > No such file or directory > Looks like you should also install numpy development > packages > > With respect > Shawkat Nizamov > > 2010/6/21, Paul Robinson <[email protected]>: > Hello! > > I am very excited to try using MEEP within > python (especially for use with > 3D geometry files), but have not had much > success building > python-meep.1.3.2. I suspect this has more to > do with how my system is set > up than with the package itself, but perhaps > one of you can see where I've > gone wrong. I'm using Ubuntu 9.04 with > python2.6.5, libmeep - Meep version > 1.1.1, and swig 2.0.0. The output of > sudo ./make appears below: > > > > robin...@robinson-laptop:~/Shellscripts/Py_Scripts/python-meep-launchpad-LATEST_RELEASE$ > sudo ./make > [sudo] password for robinson: > Directories for SWIG -I option : > ['/usr/include'] > Directories for -L option : ['/usr/lib'] > running clean > 'build/lib.linux-i686-2.6' does not exist -- > can't clean it > 'build/bdist.linux-i686' does not exist -- > can't clean it > 'build/scripts-2.6' does not exist -- can't > clean it > Directories for SWIG -I option : > ['/usr/include'] > Directories for -L option : ['/usr/lib'] > running build_ext > building '_meep' extension > swigging meep.i to meep_wrap.cpp > swig -python -c++ > -w503,389,302,362,314,509,451 -I/usr/include > -o > meep_wrap.cpp meep.i > creating build > creating build/temp.linux-i686-2.6 > gcc -pthread -fno-strict-aliasing -DNDEBUG -g > -fwrapv -O2 -Wall > -Wstrict-prototypes -fPIC -I/usr/include > -I/usr/include/python2.6 -c > meep_wrap.cpp -o > build/temp.linux-i686-2.6/meep_wrap.o > cc1plus: warning: command line option > "-Wstrict-prototypes" is valid for > Ada/C/ObjC but not for C++ > meep_wrap.cpp:150:20: error: Python.h: No such > file or directory > meep_wrap.cpp:3254:4: error: #error "This > python version requires swig to be > run with the '-classic' option" > In file included from meep_wrap.cpp:3675: > custom.hpp:39:30: error: numpy/npy_common.h: > No such file or directory > In file included > from /usr/include/python2.6/numpy/arrayobject.h:14, > from custom.hpp:40, > from meep_wrap.cpp:3675: > /usr/include/python2.6/numpy/ndarrayobject.h:114:2: > error: #error Must use > Python with unicode enabled. > meep_wrap.cpp:781: error: ‘PyObject’ was not > declared in this scope > meep_wrap.cpp:781: error: ‘str’ was not > declared in this scope > meep_wrap.cpp:782: error: expected ‘,’ or ‘;’ > before ‘{’ token > meep_wrap.cpp:805: error: expected initializer > before ‘*’ token > meep_wrap.cpp:831: error: expected initializer > before ‘*’ token > meep_wrap.cpp:885: error: expected initializer > before ‘*’ token > meep_wrap.cpp:906: error: expected initializer > before ‘*’ token > In file included from /usr/include/c > ++/4.3/new:45, > from /usr/include/c > ++/4.3/ext/new_allocator.h:37, > from > /usr/include/c++/4.3/i486-linux-gnu/bits/c > ++allocator.h:39, > from /usr/include/c > ++/4.3/bits/allocator.h:53, > from /usr/include/c > ++/4.3/string:48, > from meep_wrap.cpp:2692: > /usr/include/c++/4.3/exception:40: error: > expected declaration before end of > line > error: command 'gcc' failed with exit status 1 > Directories for SWIG -I option : > ['/usr/include'] > Directories for -L option : ['/usr/lib'] > running install > running build > running build_py > creating build/lib.linux-i686-2.6 > copying meep.py -> build/lib.linux-i686-2.6 > running build_ext > building '_meep' extension > swigging meep.i to meep_wrap.cpp > swig -python -c++ > -w503,389,302,362,314,509,451 -I/usr/include > -o > meep_wrap.cpp meep.i > gcc -pthread -fno-strict-aliasing -DNDEBUG -g > -fwrapv -O2 -Wall > -Wstrict-prototypes -fPIC -I/usr/include > -I/usr/include/python2.6 -c > meep_wrap.cpp -o > build/temp.linux-i686-2.6/meep_wrap.o > cc1plus: warning: command line option > "-Wstrict-prototypes" is valid for > Ada/C/ObjC but not for C++ > meep_wrap.cpp:150:20: error: Python.h: No such > file or directory > meep_wrap.cpp:3254:4: error: #error "This > python version requires swig to be > run with the '-classic' option" > In file included from meep_wrap.cpp:3675: > custom.hpp:39:30: error: numpy/npy_common.h: > No such file or directory > In file included > from /usr/include/python2.6/numpy/arrayobject.h:14, > from custom.hpp:40, > from meep_wrap.cpp:3675: > /usr/include/python2.6/numpy/ndarrayobject.h:114:2: > error: #error Must use > Python with unicode enabled. > meep_wrap.cpp:781: error: ‘PyObject’ was not > declared in this scope > meep_wrap.cpp:781: error: ‘str’ was not > declared in this scope > meep_wrap.cpp:782: error: expected ‘,’ or ‘;’ > before ‘{’ token > meep_wrap.cpp:805: error: expected initializer > before ‘*’ token > meep_wrap.cpp:831: error: expected initializer > before ‘*’ token > meep_wrap.cpp:885: error: expected initializer > before ‘*’ token > meep_wrap.cpp:906: error: expected initializer > before ‘*’ token > In file included from /usr/include/c > ++/4.3/new:45, > from /usr/include/c > ++/4.3/ext/new_allocator.h:37, > from > /usr/include/c++/4.3/i486-linux-gnu/bits/c > ++allocator.h:39, > from /usr/include/c > ++/4.3/bits/allocator.h:53, > from /usr/include/c > ++/4.3/string:48, > from meep_wrap.cpp:2692: > /usr/include/c++/4.3/exception:40: error: > expected declaration before end of > line > error: command 'gcc' failed with exit status 1 > Directories for SWIG -I option : > ['/usr/include'] > Directories for -L option : ['/usr/lib'] > running bdist > running bdist_dumb > running build > running build_py > copying meep.py -> build/lib.linux-i686-2.6 > running build_ext > building '_meep' extension > swigging meep.i to meep_wrap.cpp > swig -python -c++ > -w503,389,302,362,314,509,451 -I/usr/include > -o > meep_wrap.cpp meep.i > gcc -pthread -fno-strict-aliasing -DNDEBUG -g > -fwrapv -O2 -Wall > -Wstrict-prototypes -fPIC -I/usr/include > -I/usr/include/python2.6 -c > meep_wrap.cpp -o > build/temp.linux-i686-2.6/meep_wrap.o > cc1plus: warning: command line option > "-Wstrict-prototypes" is valid for > Ada/C/ObjC but not for C++ > meep_wrap.cpp:150:20: error: Python.h: No such > file or directory > meep_wrap.cpp:3254:4: error: #error "This > python version requires swig to be > run with the '-classic' option" > In file included from meep_wrap.cpp:3675: > custom.hpp:39:30: error: numpy/npy_common.h: > No such file or directory > In file included > from /usr/include/python2.6/numpy/arrayobject.h:14, > from custom.hpp:40, > from meep_wrap.cpp:3675: > /usr/include/python2.6/numpy/ndarrayobject.h:114:2: > error: #error Must use > Python with unicode enabled. > meep_wrap.cpp:781: error: ‘PyObject’ was not > declared in this scope > meep_wrap.cpp:781: error: ‘str’ was not > declared in this scope > meep_wrap.cpp:782: error: expected ‘,’ or ‘;’ > before ‘{’ token > meep_wrap.cpp:805: error: expected initializer > before ‘*’ token > meep_wrap.cpp:831: error: expected initializer > before ‘*’ token > meep_wrap.cpp:885: error: expected initializer > before ‘*’ token > meep_wrap.cpp:906: error: expected initializer > before ‘*’ token > In file included from /usr/include/c > ++/4.3/new:45, > from /usr/include/c > ++/4.3/ext/new_allocator.h:37, > from > /usr/include/c++/4.3/i486-linux-gnu/bits/c > ++allocator.h:39, > from /usr/include/c > ++/4.3/bits/allocator.h:53, > from /usr/include/c > ++/4.3/string:48, > from meep_wrap.cpp:2692: > /usr/include/c++/4.3/exception:40: error: > expected declaration before end of > line > error: command 'gcc' failed with exit status 1 > > > I see no Python.h file is found, and also what > appear to be unicode issues > with python. Is this the source of all my > woes? If so, how do I fix it? > Anything else I need to fix/change? Any > pointers or advice would be most > appreciated. > > Thanks, > Paul Robinson > > > > _______________________________________________ > Mailing list: https://launchpad.net/~python-meep > Post to : [email protected] > Unsubscribe : https://launchpad.net/~python-meep > More help : https://help.launchpad.net/ListHelp > > > > _______________________________________________ Mailing list: https://launchpad.net/~python-meep Post to : [email protected] Unsubscribe : https://launchpad.net/~python-meep More help : https://help.launchpad.net/ListHelp
