PythoncadBugTraker item #3248868, was opened at 2011-03-27 08:39 Message generated for change (Tracker Item Submitted) made by nobody You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=1128790&aid=3248868&group_id=263167
Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: Bug Group: R38 Status: Open Resolution: None Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: Problem During trim command Initial Comment: If you have tow line disconnected as in attached file and you try to use the trim command, the command dose not work as expected. Instead of stretch the line from the nearest point it stretch the distant point one ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=1128790&aid=3248868&group_id=263167 ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ Pythoncad-developer mailing list Pythoncad-developer@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/pythoncad-developer
