Hmmm... Really strange, isn't PyUSB 0.4 already installed? I have managed test scripts to silently ignore test when test device is not present, to when I am testing certain features which don't require hardware...
2010/4/2 Xiaofan Chen <xiaof...@gmail.com>: > Somehow the test program for pyusb does nothing under FreeBSD > 8.0-RELEASE-p2. Strange. > > I have the pyusb test device plugged in and the examples work nicely > under Linux. > > The libusb 0.1 and 1.0 wrapper under FreeBSD 8 seems to work fine. > http://svn.freebsd.org/viewvc/base/head/lib/libusb/ > > The build process went smoothly. But the test program does nothing. > > [mc...@myfreebsd ~/Desktop/build/pyusb/pyusb/trunk]$ sudo python > setup.py install > running install > running build > running build_py > creating build > creating build/lib > creating build/lib/usb > copying usb/core.py -> build/lib/usb > copying usb/util.py -> build/lib/usb > copying usb/__init__.py -> build/lib/usb > copying usb/_interop.py -> build/lib/usb > copying usb/legacy.py -> build/lib/usb > creating build/lib/usb/backend > copying usb/backend/openusb.py -> build/lib/usb/backend > copying usb/backend/__init__.py -> build/lib/usb/backend > copying usb/backend/libusb01.py -> build/lib/usb/backend > copying usb/backend/libusb10.py -> build/lib/usb/backend > running install_lib > running install_egg_info > Removing /usr/local/lib/python2.6/site-packages/PyUSB-1.0.0_a0-py2.6.egg-info > Writing /usr/local/lib/python2.6/site-packages/PyUSB-1.0.0_a0-py2.6.egg-info > > [mc...@myfreebsd ~/Desktop/build/pyusb/pyusb/trunk/tests]$ sudo python > testall.py > ....... > ---------------------------------------------------------------------- > Ran 7 tests in 0.023s > > OK > > It also does nothing for the older test program in 0.4.2. > [mc...@myfreebsd ~/Desktop/build/pyusb/pyusb-0.4.2/samples]$ python usbenum.py > [mc...@myfreebsd ~/Desktop/build/pyusb/pyusb-0.4.2/samples]$ python > usbprint.py > > > [mc...@myfreebsd ~/Desktop/build/pyusb/pyusb/trunk]$ lsusb -d fffe:0001 > Bus /dev/usb Device /dev/ugen0.5: ID fffe:0001 > [mc...@myfreebsd ~/Desktop/build/pyusb/pyusb/trunk]$ lsusb -d fffe:0001 -vvv > > Bus /dev/usb Device /dev/ugen0.5: ID fffe:0001 > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0xfffe > idProduct 0x0001 > bcdDevice 0.01 > iManufacturer 1 Mxyzp7lk > iProduct 2 PyUSB > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 60 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xc0 > Self Powered > MaxPower 100mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 6 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 255 Vendor Specific Protocol > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 32 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 32 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 32 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x82 EP 2 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 32 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x03 EP 3 OUT > bmAttributes 1 > Transfer Type Isochronous > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 32 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 EP 3 IN > bmAttributes 1 > Transfer Type Isochronous > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 32 > can't get device qualifier: Input/output error > can't get debug descriptor: Input/output error > Device Status: 0x0000 > (Bus Powered) > > > -- > Xiaofan http://mcuee.blogspot.com > > ------------------------------------------------------------------------------ > Download Intel® Parallel Studio Eval > Try the new software tools for yourself. Speed compiling, find bugs > proactively, and fine-tune applications for parallel performance. > See why Intel Parallel Studio got high marks during beta. > http://p.sf.net/sfu/intel-sw-dev > _______________________________________________ > pyusb-users mailing list > pyusb-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/pyusb-users > ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ pyusb-users mailing list pyusb-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/pyusb-users
