On Sun, May 30, 2010 at 5:32 AM, Mark <m...@absamail.co.za> wrote: > Hello Xiaofan, thanks for the reply. I did create the .inf file & > selected it as the driver to load when the device is attached. My device > shows up with no errors under Device Manager but when I run > testlibusb-win.exe nothing at all is shown (not even for devices that > windows can see). I have also installed the filter package as suggested > by Wander but without success. >
How did you create the INF file? You have to use INF-Wizard. Then testlibusb-win.exe should only show your device. As for the filter driver, it should show most of your USB device (like your USB mouse if you have one). It will not show the hubs whereas linux libusb will show your hubs. What does "lsusb -vvv" say about your device under Linux? -- Xiaofan http://mcuee.blogspot.com ------------------------------------------------------------------------------ _______________________________________________ pyusb-users mailing list pyusb-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/pyusb-users