Hello, I'm developping a solution that needs to read raw data from 3DConnexion SpaceMouse Wireless and then send it via sockets to another application. I was able to do it with the SpaceMouse cabled but I've been unable to do it via the wireless receiver.
I seeked help on 3D Connexion forums but everything I managed to get was the following info: The Universal Receiver (UR) can pair up to five wireless devices, each on a separate USB interface. Within each interface, you will find a set of top-level collections (as per the HID specification; these are also known as "application collections"). There's one top-level collection if the interface has no pairing, two if the pairing is for a SpaceMouse and three for a CadMouse type. You're interested in the second case. The two top-level collections (all in the "generic" desktop usage page) consist of a "multi-axis controller" usage collection (ID 0x08) and a "vendor-defined" collection. You want to use the former. Meanwhile, I've managed to read the data with pywinusb. Pywinusb detects 6/7 devices and one (only one) of them is able to read the data. But I would like to do it with pyusb as I'd also want to be linux supported. Any help will be very appreciated, thank you` Best Regards
_______________________________________________ pyusb-users mailing list pyusb-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/pyusb-users
