[PATCH v4 9/9] hw/nvme: Refer to dev->exp.sriov_pf.num_vfs

[Akihiko Odaki]

NumVFs may not equal to the current effective number of VFs because VF
Enable is cleared, NumVFs is set after VF Enable is set, or NumVFs is
greater than TotalVFs.

Fixes: 11871f53ef8e ("hw/nvme: Add support for the Virtualization Management 
command")
Signed-off-by: Akihiko Odaki <akihiko.od...@daynix.com>
---
 hw/nvme/ctrl.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index f8df622fe590..daedda5d326f 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -8481,7 +8481,7 @@ static void nvme_sriov_pre_write_ctrl(PCIDevice *dev, 
uint32_t address,
     NvmeSecCtrlEntry *sctrl;
     uint16_t sriov_cap = dev->exp.sriov_cap;
     uint32_t off = address - sriov_cap;
-    int i, num_vfs;
+    int i;
 
     if (!sriov_cap) {
         return;
@@ -8489,8 +8489,7 @@ static void nvme_sriov_pre_write_ctrl(PCIDevice *dev, 
uint32_t address,
 
     if (range_covers_byte(off, len, PCI_SRIOV_CTRL)) {
         if (!(val & PCI_SRIOV_CTRL_VFE)) {
-            num_vfs = pci_get_word(dev->config + sriov_cap + PCI_SRIOV_NUM_VF);
-            for (i = 0; i < num_vfs; i++) {
+            for (i = 0; i < dev->exp.sriov_pf.num_vfs; i++) {
                 sctrl = &n->sec_ctrl_list.sec[i];
                 nvme_virt_set_state(n, le16_to_cpu(sctrl->scid), false);
             }

-- 
2.43.0