On Thu, 11/09 16:14, Max Reitz wrote:
> On 2017-11-09 05:21, Fam Zheng wrote:
> > On Thu, 11/09 01:48, Max Reitz wrote:
> >> Hi,
> >>
> >> More exciting news from the bdrv_drain() front!
> >>
> >> I've noticed in the past that iotest 194 sometimes hangs.  I usually run
> >> the tests on tmpfs, but I've just now verified that it happens on my SSD
> >> just as well.
> >>
> >> So the reproducer is a plain:
> >>
> >> while ./check -raw 194; do; done
> > 
> > I cannot produce it on my machine.
> 
> Hm, too bad.  I see it both on my work laptop (with Fedora) and my
> desktop (with Arch)...
> 
> >> (No difference between raw or qcow2, though.)
> >>
> >> And then, after a couple of runs (or a couple ten), it will just hang.
> >> The reason is that the source VM lingers around and doesn't quit
> >> voluntarily -- the test itself was successful, but it just can't exit.
> >>
> >> If you force it to exit by killing the VM (e.g. through pkill -11 qemu),
> >> this is the backtrace:
> >>
> >> #0  0x00007f7cfc297e06 in ppoll () at /lib64/libc.so.6
> >> #1  0x0000563b846bcac9 in ppoll (__ss=0x0, __timeout=0x0,
> >> __nfds=<optimized out>, __fds=<optimized out>) at
> >> /usr/include/bits/poll2.h:77
> > 
> > Looking at the 0 timeout it seems we are in the aio_poll(ctx, 
> > blocking=false);
> > branches of BDRV_POLL_WHILE? Is it a busy loop? If so I wonder what is 
> > making
> > progress and causing the return value to be true in aio_poll().
> > 
> >> #2  0x0000563b846bcac9 in qemu_poll_ns (fds=<optimized out>,
> >> nfds=<optimized out>, timeout=<optimized out>) at util/qemu-timer.c:322
> >> #3  0x0000563b846be711 in aio_poll (ctx=ctx@entry=0x563b856e3e80,
> >> blocking=<optimized out>) at util/aio-posix.c:629
> >> #4  0x0000563b8463afa4 in bdrv_drain_recurse
> >> (bs=bs@entry=0x563b865568a0, begin=begin@entry=true) at block/io.c:201
> >> #5  0x0000563b8463baff in bdrv_drain_all_begin () at block/io.c:381
> >> #6  0x0000563b8463bc99 in bdrv_drain_all () at block/io.c:411
> >> #7  0x0000563b8459888b in block_migration_cleanup (opaque=<optimized
> >> out>) at migration/block.c:714
> >> #8  0x0000563b845883be in qemu_savevm_state_cleanup () at
> >> migration/savevm.c:1251
> >> #9  0x0000563b845811fd in migration_thread (opaque=0x563b856f1da0) at
> >> migration/migration.c:2298
> >> #10 0x00007f7cfc56f36d in start_thread () at /lib64/libpthread.so.0
> >> #11 0x00007f7cfc2a3e1f in clone () at /lib64/libc.so.6
> >>
> >>
> >> And when you make bdrv_drain_all_begin() print what we are trying to
> >> drain, you can see that it's the format node (managed by the "raw"
> >> driver in this case).
> > 
> > So what is the value of bs->in_flight?
> 
> gdb:
> > (gdb) print bs->in_flight 
> > $3 = 2307492233
> 
> "That's weird, why would it..."
> 
> > (gdb) print *bs
> > $4 = {open_flags = -1202160144, read_only = 161, encrypted = 85, sg = 
> > false, probed = false, force_share = 96, implicit = 159, drv = 0x0, opaque 
> > = 0x0, aio_context = 0x8989898989898989, aio_notifiers = {lh_first = 
> > 0x8989898989898989}, 
> >   walking_aio_notifiers = 137, filename = '\211' <repeats 4096 times>, 
> > backing_file = '\211' <repeats 4096 times>, backing_format = '\211' 
> > <repeats 16 times>, full_open_options = 0x8989898989898989, 
> >   exact_filename = '\211' <repeats 4096 times>, backing = 
> > 0x8989898989898989, file = 0x8989898989898989, bl = {request_alignment = 
> > 2307492233, max_pdiscard = -1987475063, pdiscard_alignment = 2307492233, 
> >     max_pwrite_zeroes = -1987475063, pwrite_zeroes_alignment = 2307492233, 
> > opt_transfer = 2307492233, max_transfer = 2307492233, min_mem_alignment = 
> > 9910603678816504201, opt_mem_alignment = 9910603678816504201, max_iov = 
> > -1987475063}, 
> >   supported_write_flags = 2307492233, supported_zero_flags = 2307492233, 
> > node_name = '\211' <repeats 32 times>, node_list = {tqe_next = 
> > 0x8989898989898989, tqe_prev = 0x8989898989898989}, bs_list = {tqe_next = 
> > 0x8989898989898989, 
> >     tqe_prev = 0x8989898989898989}, monitor_list = {tqe_next = 
> > 0x8989898989898989, tqe_prev = 0x8989898989898989}, refcnt = -1987475063, 
> > op_blockers = {{lh_first = 0x8989898989898989} <repeats 16 times>}, job = 
> > 0x8989898989898989, 
> >   inherits_from = 0x8989898989898989, children = {lh_first = 
> > 0x8989898989898989}, parents = {lh_first = 0x8989898989898989}, options = 
> > 0x8989898989898989, explicit_options = 0x8989898989898989, detect_zeroes = 
> > 2307492233, 
> >   backing_blocker = 0x8989898989898989, total_sectors = 
> > -8536140394893047415, before_write_notifiers = {notifiers = {lh_first = 
> > 0x8989898989898989}}, write_threshold_offset = 9910603678816504201, 
> > write_threshold_notifier = {notify = 
> >     0x8989898989898989, node = {le_next = 0x8989898989898989, le_prev = 
> > 0x8989898989898989}}, dirty_bitmap_mutex = {lock = {__data = {__lock = 
> > -1987475063, __count = 2307492233, __owner = -1987475063, __nusers = 
> > 2307492233, 
> >         __kind = -1987475063, __spins = -30327, __elision = -30327, __list 
> > = {__prev = 0x8989898989898989, __next = 0x8989898989898989}}, __size = 
> > '\211' <repeats 40 times>, __align = -8536140394893047415}, initialized = 
> > 137}, 
> >   dirty_bitmaps = {lh_first = 0x8989898989898989}, wr_highest_offset = 
> > {value = 9910603678816504201}, copy_on_read = -1987475063, in_flight = 
> > 2307492233, serialising_in_flight = 2307492233, wakeup = 137, io_plugged = 
> > 2307492233, 
> >   enable_write_cache = -1987475063, quiesce_counter = -1987475063, 
> > write_gen = 2307492233, reqs_lock = {locked = 2307492233, ctx = 
> > 0x8989898989898989, from_push = {slh_first = 0x8989898989898989}, to_pop = {
> >       slh_first = 0x8989898989898989}, handoff = 2307492233, sequence = 
> > 2307492233, holder = 0x8989898989898989}, tracked_requests = {lh_first = 
> > 0x8989898989898989}, flush_queue = {entries = {sqh_first = 
> > 0x8989898989898989, 
> >       sqh_last = 0x8989898989898989}}, active_flush_req = 160, flushed_gen 
> > = 0}
> "Oh."
> 
> *sigh*
> 
> OK, I'll look into it...

OK, I'll let you.. Just one more thing: could it relate to the use-after-free
bug reported on block_job_defer_to_main_loop()?

https://lists.gnu.org/archive/html/qemu-devel/2017-11/msg01144.html

Fam

Reply via email to