On Sat, 2 Jan 2021, Philippe Mathieu-Daudé wrote:
We closed 2020 with few discussions about the Fuloong 2E board
(see [1] and [2]).
This series collect the minimum set of patch to have the machine
booting Linux guest again, including integration tests.
This is sent as RFC because Mark raised some issues in (see [3]
and previous in this thread) and I don't understand PCI enough
to intervene.
Thanks for collecting these. Let me summarise the discussion because the
meaning may have been lost in the seamingly heated debate but I think
Mark's main concern was that he does not like having a feature flag and
property setting the emulation to partially emulate the device: either
only emulating legacy mode or native mode that this patch does but he
would prefer to faithfully emulate the device preferably allowing
switching between modes. But that's not easily possible without rewritig
either the ISA emulation or PCI emulation in QEMU because current code
does not allow these to be switched once created. That's way more work and
risk of breaking other things using these fundamental parts that I would
want to take on. My goal was only to allow using this (otherwise quite
unused and deglected) device model in pegasos2 emulation which needs
native mode. But turns out fuloong2e Linux wants legacy mode so we need a
way to resolve this conflict and the solution was this flag and keeping
partial emulation depending on machine.
But Mark still considered that a horrible hack but after looking more
closely he also found the difficulty of implementing a more faithful
emulation so he would accept the flag at the end but still wanted
registers to be set more consistently matching what the data sheet and
whatever ideals would dictate. However I've spent a lot of time before
finding these values that work with all clients and found some of these
clients have assumptions instead of working in an ideal world following
what data sheets say and I don't want to make any changes to this now
before we also have pegasos2 upstreamed so any change can be more
throughly tested and I don't have to retest everything for every small
change just to find something broke,
This was the main reason for disagreement and I think Mark's standards for
this device was way higher than necessary in this situation and I may have
got upset to have this pushed back again when we've already went through
this last March where we also had a long discussion after which Mark
managed to get rid of the flag but that now came back in a different form.
(Previously it was switching between fully native and non-100% native
mode, now it selects legacy or non-100% native mode where legacy is needed
for fuloong2e linux and non-100% native mode is needed for pegasos2
guests.) This may not be how the real device work (Mark also has concerns
about what exactly is non-100% native mode) and it may be a horrible hack
but it's probably the best that can be done with current QEMU facilities
and in the time I had and since this is only used on fuloong2e and
pegasos2 for a few obscure guests I think it does not need any more
complex solution at the moment.
It seems this disagreement on what's good enough for a device model to get
in QEMU is the source of disagreement between us with Mark but we'll sort
that out off list once I finish preparing my pegasos2 patches that will
finally show where these changes go and oters can also test any proposed
changes.
Regards,
BALATON Zoltan
Peter commented a similar PCI issue with the Sam460ex [4] so might
be able to help us here.
Anyhow, sharing this PoC on the list with the test, the avoid boring
manual testing.
Regards,
Phil.
[1] https://www.mail-archive.com/[email protected]/msg769105.html
[2] https://www.mail-archive.com/[email protected]/msg769557.html
[3] https://www.mail-archive.com/[email protected]/msg769593.html
[4] https://www.mail-archive.com/[email protected]/msg769697.html
BALATON Zoltan (1):
ide: Make room for flags in PCIIDEState and add one for legacy mode
Guenter Roeck (1):
via-ide: Fix fuloong2e support
Jiaxun Yang (1):
tests/acceptance: Test boot_linux_console for fuloong2e
Philippe Mathieu-Daudé (2):
hw/pci-host/bonito: Remap PCI "lo" regions when PCIMAP reg is modified
tests/integration: Test Fuloong2E IDE drive, run userspace commands
include/hw/ide/pci.h | 7 +++-
hw/ide/cmd646.c | 6 ++--
hw/ide/via.c | 19 ++++++++--
hw/mips/fuloong2e.c | 4 ++-
hw/pci-host/bonito.c | 49 +++++++++++++++++++-------
hw/sparc64/sun4u.c | 2 +-
tests/acceptance/boot_linux_console.py | 47 ++++++++++++++++++++++++
7 files changed, 113 insertions(+), 21 deletions(-)
--
2.26.2
