On Sun, 2022-10-16 at 23:05 +0800, Sam Li wrote:
> Use scripts/update-linux-headers.sh to update virtio-blk headers
> from Dmitry's "virtio-blk:add support for zoned block devices"
> linux patch. There is a link for more information:
> https://github.com/dmitry-fomichev/virtblk-zbd
> 
> Signed-off-by: Sam Li <faithilike...@gmail.com>
> Reviewed-by: Stefan Hajnoczi <stefa...@redhat.com>
> Signed-off-by: Sam Li <faithilike...@gmail.com>

the duplicate sign-off is not needed. With this,

Reviewed-by: Dmitry Fomichev <dmitry.fomic...@wdc.com>

> ---
>  include/standard-headers/linux/virtio_blk.h | 109 ++++++++++++++++++++
>  1 file changed, 109 insertions(+)
> 
> diff --git a/include/standard-headers/linux/virtio_blk.h b/include/standard-
> headers/linux/virtio_blk.h
> index 2dcc90826a..490bd21c76 100644
> --- a/include/standard-headers/linux/virtio_blk.h
> +++ b/include/standard-headers/linux/virtio_blk.h
> @@ -40,6 +40,7 @@
>  #define VIRTIO_BLK_F_MQ                12      /* support more than one vq */
>  #define VIRTIO_BLK_F_DISCARD   13      /* DISCARD is supported */
>  #define VIRTIO_BLK_F_WRITE_ZEROES      14      /* WRITE ZEROES is supported 
> */
> +#define VIRTIO_BLK_F_ZONED             17      /* Zoned block device */
>  
>  /* Legacy feature bits */
>  #ifndef VIRTIO_BLK_NO_LEGACY
> @@ -119,6 +120,20 @@ struct virtio_blk_config {
>         uint8_t write_zeroes_may_unmap;
>  
>         uint8_t unused1[3];
> +
> +       /* Secure erase fields that are defined in the virtio spec */
> +       uint8_t sec_erase[12];
> +
> +       /* Zoned block device characteristics (if VIRTIO_BLK_F_ZONED) */
> +       struct virtio_blk_zoned_characteristics {
> +               __virtio32 zone_sectors;
> +               __virtio32 max_open_zones;
> +               __virtio32 max_active_zones;
> +               __virtio32 max_append_sectors;
> +               __virtio32 write_granularity;
> +               uint8_t model;
> +               uint8_t unused2[3];
> +       } zoned;
>  } QEMU_PACKED;
>  
>  /*
> @@ -153,6 +168,27 @@ struct virtio_blk_config {
>  /* Write zeroes command */
>  #define VIRTIO_BLK_T_WRITE_ZEROES      13
>  
> +/* Zone append command */
> +#define VIRTIO_BLK_T_ZONE_APPEND    15
> +
> +/* Report zones command */
> +#define VIRTIO_BLK_T_ZONE_REPORT    16
> +
> +/* Open zone command */
> +#define VIRTIO_BLK_T_ZONE_OPEN      18
> +
> +/* Close zone command */
> +#define VIRTIO_BLK_T_ZONE_CLOSE     20
> +
> +/* Finish zone command */
> +#define VIRTIO_BLK_T_ZONE_FINISH    22
> +
> +/* Reset zone command */
> +#define VIRTIO_BLK_T_ZONE_RESET     24
> +
> +/* Reset All zones command */
> +#define VIRTIO_BLK_T_ZONE_RESET_ALL 26
> +
>  #ifndef VIRTIO_BLK_NO_LEGACY
>  /* Barrier before this op. */
>  #define VIRTIO_BLK_T_BARRIER   0x80000000
> @@ -172,6 +208,72 @@ struct virtio_blk_outhdr {
>         __virtio64 sector;
>  };
>  
> +/*
> + * Supported zoned device models.
> + */
> +
> +/* Regular block device */
> +#define VIRTIO_BLK_Z_NONE      0
> +/* Host-managed zoned device */
> +#define VIRTIO_BLK_Z_HM        1
> +/* Host-aware zoned device */
> +#define VIRTIO_BLK_Z_HA        2
> +
> +/*
> + * Zone descriptor. A part of VIRTIO_BLK_T_ZONE_REPORT command reply.
> + */
> +struct virtio_blk_zone_descriptor {
> +       /* Zone capacity */
> +       __virtio64 z_cap;
> +       /* The starting sector of the zone */
> +       __virtio64 z_start;
> +       /* Zone write pointer position in sectors */
> +       __virtio64 z_wp;
> +       /* Zone type */
> +       uint8_t z_type;
> +       /* Zone state */
> +       uint8_t z_state;
> +       uint8_t reserved[38];
> +};
> +
> +struct virtio_blk_zone_report {
> +       __virtio64 nr_zones;
> +       uint8_t reserved[56];
> +       struct virtio_blk_zone_descriptor zones[];
> +};
> +
> +/*
> + * Supported zone types.
> + */
> +
> +/* Conventional zone */
> +#define VIRTIO_BLK_ZT_CONV         1
> +/* Sequential Write Required zone */
> +#define VIRTIO_BLK_ZT_SWR          2
> +/* Sequential Write Preferred zone */
> +#define VIRTIO_BLK_ZT_SWP          3
> +
> +/*
> + * Zone states that are available for zones of all types.
> + */
> +
> +/* Not a write pointer (conventional zones only) */
> +#define VIRTIO_BLK_ZS_NOT_WP       0
> +/* Empty */
> +#define VIRTIO_BLK_ZS_EMPTY        1
> +/* Implicitly Open */
> +#define VIRTIO_BLK_ZS_IOPEN        2
> +/* Explicitly Open */
> +#define VIRTIO_BLK_ZS_EOPEN        3
> +/* Closed */
> +#define VIRTIO_BLK_ZS_CLOSED       4
> +/* Read-Only */
> +#define VIRTIO_BLK_ZS_RDONLY       13
> +/* Full */
> +#define VIRTIO_BLK_ZS_FULL         14
> +/* Offline */
> +#define VIRTIO_BLK_ZS_OFFLINE      15
> +
>  /* Unmap this range (only valid for write zeroes command) */
>  #define VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP     0x00000001
>  
> @@ -198,4 +300,11 @@ struct virtio_scsi_inhdr {
>  #define VIRTIO_BLK_S_OK                0
>  #define VIRTIO_BLK_S_IOERR     1
>  #define VIRTIO_BLK_S_UNSUPP    2
> +
> +/* Error codes that are specific to zoned block devices */
> +#define VIRTIO_BLK_S_ZONE_INVALID_CMD     3
> +#define VIRTIO_BLK_S_ZONE_UNALIGNED_WP    4
> +#define VIRTIO_BLK_S_ZONE_OPEN_RESOURCE   5
> +#define VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE 6
> +
>  #endif /* _LINUX_VIRTIO_BLK_H */

Reply via email to