> -----Original Message-----
> From: Hao Xiang <hao.xi...@bytedance.com>
> Sent: Thursday, January 11, 2024 2:40 PM
> To: Fabiano Rosas <faro...@suse.de>
> Cc: Liu, Yuan1 <yuan1....@intel.com>; Bryan Zhang
> <bryan.zh...@bytedance.com>; qemu-devel@nongnu.org;
> marcandre.lur...@redhat.com; pet...@redhat.com; quint...@redhat.com;
> peter.mayd...@linaro.org; berra...@redhat.com
> Subject: Re: [External] Re: [PATCH 3/5] migration: Introduce unimplemented
> 'qatzip' compression method
>
> On Mon, Jan 8, 2024 at 12:28 PM Fabiano Rosas <faro...@suse.de> wrote:
> >
> > "Liu, Yuan1" <yuan1....@intel.com> writes:
> >
> > >> -----Original Message-----
> > >> From: Hao Xiang <hao.xi...@bytedance.com>
> > >> Sent: Saturday, January 6, 2024 7:53 AM
> > >> To: Fabiano Rosas <faro...@suse.de>
> > >> Cc: Bryan Zhang <bryan.zh...@bytedance.com>; qemu-devel@nongnu.org;
> > >> marcandre.lur...@redhat.com; pet...@redhat.com;
> > >> quint...@redhat.com; peter.mayd...@linaro.org; Liu, Yuan1
> > >> <yuan1....@intel.com>; berra...@redhat.com
> > >> Subject: Re: [External] Re: [PATCH 3/5] migration: Introduce
> > >> unimplemented 'qatzip' compression method
> > >>
> > >> On Fri, Jan 5, 2024 at 12:07 PM Fabiano Rosas <faro...@suse.de>
> wrote:
> > >> >
> > >> > Bryan Zhang <bryan.zh...@bytedance.com> writes:
> > >> >
> > >> > +cc Yuan Liu, Daniel Berrangé
> > >> >
> > >> > > Adds support for 'qatzip' as an option for the multifd
> > >> > > compression method parameter, but copy-pastes the no-op logic
> > >> > > to leave the actual methods effectively unimplemented. This is
> > >> > > in preparation of a subsequent commit that will implement
> > >> > > actually using QAT for compression and decompression.
> > >> > >
> > >> > > Signed-off-by: Bryan Zhang <bryan.zh...@bytedance.com>
> > >> > > Signed-off-by: Hao Xiang <hao.xi...@bytedance.com>
> > >> > > ---
> > >> > > hw/core/qdev-properties-system.c | 6 ++-
> > >> > > migration/meson.build | 1 +
> > >> > > migration/multifd-qatzip.c | 81
> > >> ++++++++++++++++++++++++++++++++
> > >> > > migration/multifd.h | 1 +
> > >> > > qapi/migration.json | 5 +-
> > >> > > 5 files changed, 92 insertions(+), 2 deletions(-) create mode
> > >> > > 100644 migration/multifd-qatzip.c
> > >> > >
> > >> > > diff --git a/hw/core/qdev-properties-system.c
> > >> > > b/hw/core/qdev-properties-system.c
> > >> > > index 1a396521d5..d8e48dcb0e 100644
> > >> > > --- a/hw/core/qdev-properties-system.c
> > >> > > +++ b/hw/core/qdev-properties-system.c
> > >> > > @@ -658,7 +658,11 @@ const PropertyInfo
> > >> > > qdev_prop_fdc_drive_type = { const PropertyInfo
> qdev_prop_multifd_compression = {
> > >> > > .name = "MultiFDCompression",
> > >> > > .description = "multifd_compression values, "
> > >> > > - "none/zlib/zstd",
> > >> > > + "none/zlib/zstd"
> > >> > > +#ifdef CONFIG_QATZIP
> > >> > > + "/qatzip"
> > >> > > +#endif
> > >> > > + ,
> > >> > > .enum_table = &MultiFDCompression_lookup,
> > >> > > .get = qdev_propinfo_get_enum,
> > >> > > .set = qdev_propinfo_set_enum, diff --git
> > >> > > a/migration/meson.build b/migration/meson.build index
> > >> > > 92b1cc4297..e20f318379 100644
> > >> > > --- a/migration/meson.build
> > >> > > +++ b/migration/meson.build
> > >> > > @@ -40,6 +40,7 @@ if get_option('live_block_migration').allowed()
> > >> > > system_ss.add(files('block.c')) endif
> > >> > > system_ss.add(when: zstd, if_true: files('multifd-zstd.c'))
> > >> > > +system_ss.add(when: qatzip, if_true:
> > >> > > +files('multifd-qatzip.c'))
> > >> > >
> > >> > > specific_ss.add(when: 'CONFIG_SYSTEM_ONLY',
> > >> > > if_true: files('ram.c', diff --git
> > >> > > a/migration/multifd-qatzip.c b/migration/multifd-qatzip.c new
> file
> > >> > > mode 100644 index 0000000000..1733bbddb7
> > >> > > --- /dev/null
> > >> > > +++ b/migration/multifd-qatzip.c
> > >> > > @@ -0,0 +1,81 @@
> > >> > > +/*
> > >> > > + * Multifd QATzip compression implementation
> > >> > > + *
> > >> > > + * Copyright (c) Bytedance
> > >> > > + *
> > >> > > + * Authors:
> > >> > > + * Bryan Zhang <bryan.zh...@bytedance.com>
> > >> > > + * Hao Xiang <hao.xi...@bytedance.com>
> > >> > > + *
> > >> > > + * This work is licensed under the terms of the GNU GPL, version
> 2 or
> > >> later.
> > >> > > + * See the COPYING file in the top-level directory.
> > >> > > + */
> > >> > > +
> > >> > > +#include "qemu/osdep.h"
> > >> > > +#include "exec/ramblock.h"
> > >> > > +#include "exec/target_page.h"
> > >> > > +#include "qapi/error.h"
> > >> > > +#include "migration.h"
> > >> > > +#include "options.h"
> > >> > > +#include "multifd.h"
> > >> > > +
> > >> > > +static int qatzip_send_setup(MultiFDSendParams *p, Error **errp)
> {
> > >> > > + return 0;
> > >> > > +}
> > >> > > +
> > >> > > +static void qatzip_send_cleanup(MultiFDSendParams *p, Error
> **errp)
> > >> > > +{};
> > >> > > +
> > >> > > +static int qatzip_send_prepare(MultiFDSendParams *p, Error
> **errp)
> > >> > > +{
> > >> > > + MultiFDPages_t *pages = p->pages;
> > >> > > +
> > >> > > + for (int i = 0; i < p->normal_num; i++) {
> > >> > > + p->iov[p->iovs_num].iov_base = pages->block->host + p-
> > >> >normal[i];
> > >> > > + p->iov[p->iovs_num].iov_len = p->page_size;
> > >> > > + p->iovs_num++;
> > >> > > + }
> > >> > > +
> > >> > > + p->next_packet_size = p->normal_num * p->page_size;
> > >> > > + p->flags |= MULTIFD_FLAG_NOCOMP;
> > >> > > + return 0;
> > >> > > +}
> > >> > > +
> > >> > > +static int qatzip_recv_setup(MultiFDRecvParams *p, Error **errp)
> {
> > >> > > + return 0;
> > >> > > +}
> > >> > > +
> > >> > > +static void qatzip_recv_cleanup(MultiFDRecvParams *p) {};
> > >> > > +
> > >> > > +static int qatzip_recv_pages(MultiFDRecvParams *p, Error **errp)
> {
> > >> > > + uint32_t flags = p->flags & MULTIFD_FLAG_COMPRESSION_MASK;
> > >> > > +
> > >> > > + if (flags != MULTIFD_FLAG_NOCOMP) {
> > >> > > + error_setg(errp, "multifd %u: flags received %x flags
> > >> expected %x",
> > >> > > + p->id, flags, MULTIFD_FLAG_NOCOMP);
> > >> > > + return -1;
> > >> > > + }
> > >> > > + for (int i = 0; i < p->normal_num; i++) {
> > >> > > + p->iov[i].iov_base = p->host + p->normal[i];
> > >> > > + p->iov[i].iov_len = p->page_size;
> > >> > > + }
> > >> > > + return qio_channel_readv_all(p->c, p->iov, p->normal_num,
> > >> > > +errp); }
> > >> > > +
> > >> > > +static MultiFDMethods multifd_qatzip_ops = {
> > >> > > + .send_setup = qatzip_send_setup,
> > >> > > + .send_cleanup = qatzip_send_cleanup,
> > >> > > + .send_prepare = qatzip_send_prepare,
> > >> > > + .recv_setup = qatzip_recv_setup,
> > >> > > + .recv_cleanup = qatzip_recv_cleanup,
> > >> > > + .recv_pages = qatzip_recv_pages };
> > >> > > +
> > >> > > +static void multifd_qatzip_register(void) {
> > >> > > + multifd_register_ops(MULTIFD_COMPRESSION_QATZIP,
> > >> > > +&multifd_qatzip_ops); }
> > >> > > +
> > >> > > +migration_init(multifd_qatzip_register);
> > >> > > diff --git a/migration/multifd.h b/migration/multifd.h index
> > >> > > a835643b48..5600f7fc82 100644
> > >> > > --- a/migration/multifd.h
> > >> > > +++ b/migration/multifd.h
> > >> > > @@ -33,6 +33,7 @@ int multifd_queue_page(QEMUFile *f, RAMBlock
> > >> > > *block, ram_addr_t offset); #define MULTIFD_FLAG_NOCOMP (0 << 1)
> > >> > > #define MULTIFD_FLAG_ZLIB (1 << 1) #define MULTIFD_FLAG_ZSTD (2
> <<
> > >> > > 1)
> > >> > > +#define MULTIFD_FLAG_QATZIP (3 << 1)
> > >> > >
> > >> > > /* This value needs to be a multiple of qemu_target_page_size()
> */
> > >> > > #define MULTIFD_PACKET_SIZE (512 * 1024) diff --git
> > >> > > a/qapi/migration.json b/qapi/migration.json index
> > >> > > 6d5a4b0489..e3cc195aed 100644
> > >> > > --- a/qapi/migration.json
> > >> > > +++ b/qapi/migration.json
> > >> > > @@ -625,11 +625,14 @@
> > >> > > #
> > >> > > # @zstd: use zstd compression method.
> > >> > > #
> > >> > > +# @qatzip: use qatzip compression method.
> > >> > > +#
> > >> > > # Since: 5.0
> > >> > > ##
> > >> > > { 'enum': 'MultiFDCompression',
> > >> > > 'data': [ 'none', 'zlib',
> > >> > > - { 'name': 'zstd', 'if': 'CONFIG_ZSTD' } ] }
> > >> > > + { 'name': 'zstd', 'if': 'CONFIG_ZSTD' },
> > >> > > + { 'name': 'qatzip', 'if': 'CONFIG_QATZIP'} ] }
> > >> >
> > >> > In another thread adding support to another Intel accelerator (IAA)
> we
> > >> > decided that it was better to select the offloading as an
> accelerator
> > >> > method to multifd zlib rather than as an entirely new compression
> > >> > format. Take a look at that discussion:
> > >> > https://lore.kernel.org/r/ztfcnqbbqlmsu...@redhat.com
> > >>
> > >> We had some early discussion with Intel folks (probably a different
> team
> > >> than the one with the above patchset). The understanding at the time
> is
> > >> that QAT is good at both bulk data compression and decompression. IAA
> is
> > >> good at decompression with smaller data size but compression
> performance
> > >> is not the best. In multifd, we are compressing up to 128 4k pages at
> a
> > >> time and potentially this can increase by configuring the packet
> size, at
> > >> the time we thought QAT could be a better fit in the multifd live
> > >> migration scenario. We would like to hear more from Intel.
> > >>
> > >> From our benchmark testing, with two QAT devices, we can get deflate
> > >> compression throughout to around 7GB/s with ~160% CPU. That's beating
> the
> > >> current software implementation (zlib and zstd) by a lot. We are
> still
> > >> tuning the configuration in QEMU live migration now.
> > >>
> > >> >
> > >> > As I understand it, QAT + QATzip would be compatible with both zlib
> > >> > and IAA + QPL, so we'd add another accelerator method like this:
> > >> >
> > >> > https://lore.kernel.org/r/20240103112851.908082-3-
> yuan1....@intel.com
> > >> >
> > >>
> > >> I quickly read over the IAA patchset and I saw this:
> > >>
> > >> "However, due to some reasons, QPL is currently not compatible with
> the
> > >> existing Zlib method that Zlib compressed data can be decompressed by
> QPl
> > >> and vice versa."
> > >>
> > >> The above probably means the current zlib software implementation and
> IAA
> > >> are not compatible.
> > >>
> > >> For QAT, although, both Intel's QATzip and zlib are internally using
> > >> deflate, QATzip only supports deflate with a 4 byte header, deflate
> > >> wrapped by Gzip header and footer, or deflate wrapped by Intel® QAT
> > >> Gzip* extension header and footer. None of the headers can be
> recognized
> > >> by zlib software implementation is my understanding. So if we want to
> make
> > >> them compatible with zlib, the QATzip library needs to support that.
> > >
> > > The QPL library currently cannot support the Z_SYNC_FLULSH operation
> of zlib steaming.
> > > This is the reason why it is not compatible with zlib.
> > >
>
> When doing the QPL compression, if we set both QPL_FLAG_FIRST and
> QPL_FLAG_LAST flags and run a single job for all pages in a multifd
> packet, would it generate the same format as Z_SYNC_FLULSH in the
> current zlib-based code?
Yes, When we want to use an IAA physics engine for data compression,
We can use a QPL job and set the QPL_FLAG_FIRST and QPL_FLAG_LAST flags,
which will generate compressed data according to the deflate method.
Z_SYNC_FLUSH not only flushes the buffer, but also maintains data
alignment and maintains the current compression state.
QPL is currently unable to do this.
> >
> > I had understood from previous discussion that we'd be able to at least
> > support compression with QPL and decompression with the existing
> > zlib-based code. Is that not correct? I was about to suggest
> > experimenting with the window size in the existing code to hopefully
> > solve the 4kb window size issue. If there are other limitations, then
> > that will not be enough.
>
> >
> > Also, can you point to the source of that statement about Z_SYNC_FLUSH,
> > I couldn't find more information about it in the documentation.
> >
> > >> > All that, of course, assuming we even want to support both
> > >> > accelerators. They're addressing the same problem after all. I
> wonder
> > >> > how we'd choose a precedence, since both seem to be present in the
> > >> > same processor family.
> > >> >
> > >> >
> > >>
> > >> That's an interesting question :-) I think overall performance
> (throughput
> > >> and CPU overhead) should both be considered. IAA and QAT accelerators
> > >> don't present on all systems. We Bytedance choose to have both on our
> > >> platform when purchasing from Intel.
