On 14/2/24 08:37, Philippe Mathieu-Daudé wrote:
On 12/2/24 13:32, Peter Maydell wrote:
So I would like to explore whether we can deprecate-and-drop
some or all of them. This would let us delete the code entirely
rather than spending a long time trying to bring it up to scratch
for a probably very small to nonexistent userbase. The aim of this
email is to see if anybody is still using any of these and would be
upset if they went away. Reports of "I tried to use this machine
type and it's just broken" are also interesting as they would
strongly suggest that the machine has no real users and can be
removed.
The machines I have in mind are:
OMAP2 machines:
n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
For me these are broken since 2020 (commit 7998beb9c2 "arm/nseries:
use memdev for RAM"), this was discussed in
https://lore.kernel.org/qemu-devel/f2f276a9-a6ad-a2f8-2fbc-f1aca5423...@amsat.org/
but there was no clear consensus so I gave up testing them.
Eh good news the tests work again:
$ make check-avocado AVOCADO_TAGS='machine:n800 machine:n810'
AVOCADO_ALLOW_UNTRUSTED_CODE=1 QEMU_TEST_FLAKY_TESTS=1
AVOCADO_SHOW=app,console
AVOCADO tests/avocado
JOB ID : e089badc8daeae0882eb48e452164d00e8e19c18
JOB LOG : job-2024-02-14T07.44-e089bad/job.log
(1/2) tests/avocado/machine_arm_n8x0.py:N8x0Machine.test_n800: \
console: [ 0.000000] Linux version 2.6.35~rc4-129.1-n8x0
(abuild@build08) (gcc version 4.4.2 20091027 (MeeGo 4.4.2-7) (GCC) ) #1
PREEMPT Mon Jul 12 15:04:46 UTC 2010
console: [ 0.000000] CPU: ARMv6-compatible processor [4107b362]
revision 2 (ARMv6TEJ), cr=00c5387f
console: [ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing
instruction cache
console: [ 0.000000] Machine: Nokia N800
console: [ 0.000000] Memory policy: ECC disabled, Data cache writeback
console: [ 0.000000] OMAP2420
console: [ 0.000000]
console: [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000
size: 0x100000
console: [ 0.000000] Built 1 zonelists in Zone order, mobility
grouping on. Total pages: 32512
console: [ 0.000000] Kernel command line: printk.time=0 console=ttyS1
console: PID hash table entries: 512 (order: -1, 2048 bytes)
console: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
console: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
console: Memory: 128MB = 128MB total
console: Memory: 124008k/124008k available, 7064k reserved, 0K highmem
console: Virtual kernel memory layout:
console: vector : 0xffff0000 - 0xffff1000 ( 4 kB)
console: fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
console: DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
console: vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
console: lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
console: modules : 0xbf000000 - 0xc0000000 ( 16 MB)
console: .init : 0xc0008000 - 0xc0029000 ( 132 kB)
console: .text : 0xc0029000 - 0xc0379000 (3392 kB)
console: .data : 0xc038e000 - 0xc03ba2e0 ( 177 kB)
console: SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
console: Hierarchical RCU implementation.
console: RCU-based detection of stalled CPUs is disabled.
console: Verbose stalled-CPUs detection is disabled.
console: NR_IRQS:368
console: ------------[ cut here ]------------
console: WARNING: at arch/arm/mach-omap2/clkt_clksel.c:194
omap2_clksel_recalc+0xcc/0xe0()
console: clock: Could not find fieldval 0 for clock iva1_ifck parent core_ck
console: Modules linked in:
console: [<c002fa1c>] (unwind_backtrace+0x0/0xf0) from [<c0053850>]
(warn_slowpath_common+0x4c/0x64)
console: [<c0053850>] (warn_slowpath_common+0x4c/0x64) from [<c00538e8>]
(warn_slowpath_fmt+0x2c/0x3c)
console: [<c00538e8>] (warn_slowpath_fmt+0x2c/0x3c) from [<c00388b4>]
(omap2_clksel_recalc+0xcc/0xe0)
console: [<c00388b4>] (omap2_clksel_recalc+0xcc/0xe0) from [<c003a91c>]
(propagate_rate+0x20/0x50)
console: [<c003a91c>] (propagate_rate+0x20/0x50) from [<c003a928>]
(propagate_rate+0x2c/0x50)
console: ---[ end trace 1b75b31a2719ed1c ]---
console: ------------[ cut here ]------------
console: WARNING: at arch/arm/mach-omap2/clkt_clksel.c:194
omap2_clksel_recalc+0xcc/0xe0()
console: clock: Could not find fieldval 0 for clock dsp_fck parent core_ck
console: Modules linked in:
console: [<c002fa1c>] (unwind_backtrace+0x0/0xf0) from [<c0053850>]
(warn_slowpath_common+0x4c/0x64)
console: [<c0053850>] (warn_slowpath_common+0x4c/0x64) from [<c00538e8>]
(warn_slowpath_fmt+0x2c/0x3c)
console: [<c00538e8>] (warn_slowpath_fmt+0x2c/0x3c) from [<c00388b4>]
(omap2_clksel_recalc+0xcc/0xe0)
console: [<c00388b4>] (omap2_clksel_recalc+0xcc/0xe0) from [<c003a91c>]
(propagate_rate+0x20/0x50)
console: [<c003a91c>] (propagate_rate+0x20/0x50) from [<c003a928>]
(propagate_rate+0x2c/0x50)
console: ---[ end trace 1b75b31a2719ed1d ]---
console: ------------[ cut here ]------------
console: WARNING: at arch/arm/mach-omap2/clkt_clksel.c:194
omap2_clksel_recalc+0xcc/0xe0()
console: clock: Could not find fieldval 0 for clock dsp_irate_ick parent
dsp_fck
console: Modules linked in:
console: [<c002fa1c>] (unwind_backtrace+0x0/0xf0) from [<c0053850>]
(warn_slowpath_common+0x4c/0x64)
console: [<c0053850>] (warn_slowpath_common+0x4c/0x64) from [<c00538e8>]
(warn_slowpath_fmt+0x2c/0x3c)
console: [<c00538e8>] (warn_slowpath_fmt+0x2c/0x3c) from [<c00388b4>]
(omap2_clksel_recalc+0xcc/0xe0)
console: [<c00388b4>] (omap2_clksel_recalc+0xcc/0xe0) from [<c003a91c>]
(propagate_rate+0x20/0x50)
console: [<c003a91c>] (propagate_rate+0x20/0x50) from [<c003a928>]
(propagate_rate+0x2c/0x50)
console: ---[ end trace 1b75b31a2719ed1e ]---
console: Clocking rate (Crystal/DPLL/MPU): 19.2/658/329 MHz
console: omap_hwmod: l3_hwmod: cannot be enabled (3)
console: omap_hwmod: l4_core_hwmod: cannot be enabled (3)
console: omap_hwmod: l4_wkup_hwmod: cannot be enabled (3)
console: GPMC revision 2.0
console: IRQ: Found an INTC at 0xfa0fe000 (revision 2.1) with 96 interrupts
console: Total of 96 interrupts on 1 active controller
console: OMAP GPIO hardware version 1.8
console: OMAP clockevent source: GPTIMER1 at 32000 Hz
console: Console: colour dummy device 80x30
console: Calibrating delay loop... 897.01 BogoMIPS (lpj=3506176)
console: pid_max: default: 32768 minimum: 301
console: Mount-cache hash table entries: 512
console: CPU: Testing write buffer coherency: ok
console: devtmpfs: initialized
console: NET: Registered protocol family 16
console: MUX: setup L15_24XX_I2C1_SDA (0xfa000112): 0x0018 -> 0x0000
console: MUX: setup M19_24XX_I2C1_SCL (0xfa000111): 0x0018 -> 0x0000
console: MUX: setup H19_24XX_I2C2_SDA (0xfa000114): 0x001f -> 0x0000
console: MUX: setup J15_24XX_I2C2_SCL (0xfa000113): 0x001f -> 0x0010
console: N8x0 MIPID config loaded
console: N8x0 Blizzard initialized
console: MUX: setup H18_24XX_MMC_CMD (0xfa0000f4): 0x001f -> 0x0000
console: MUX: setup H15_24XX_MMC_CLKI (0xfa0000fe): 0x001f -> 0x0000
console: MUX: setup G19_24XX_MMC_CLKO (0xfa0000f3): 0x000f -> 0x0000
console: MUX: setup F20_24XX_MMC_DAT0 (0xfa0000f5): 0x000f -> 0x0000
console: MUX: setup F19_24XX_MMC_DAT_DIR0 (0xfa0000f9): 0x000f -> 0x0000
console: MUX: setup G18_24XX_MMC_CMD_DIR (0xfa0000fd): 0x000f -> 0x0000
console: MUX: setup H14_24XX_MMC_DAT1 (0xfa0000f6): 0x001f -> 0x0000
console: MUX: setup E19_24XX_MMC_DAT2 (0xfa0000f7): 0x000f -> 0x0000
console: MUX: setup D19_24XX_MMC_DAT3 (0xfa0000f8): 0x000f -> 0x0000
console: MUX: setup E20_24XX_MMC_DAT_DIR1 (0xfa0000fa): 0x000f -> 0x0000
console: MUX: setup F18_24XX_MMC_DAT_DIR2 (0xfa0000fb): 0x000f -> 0x0000
console: MUX: setup E18_24XX_MMC_DAT_DIR3 (0xfa0000fc): 0x001f -> 0x0000
console: MUX: setup AA10_242X_DMAREQ0 (0xfa0000e5): 0x001f -> 0x0002
console: MUX: setup AA6_242X_DMAREQ1 (0xfa0000e6): 0x000f -> 0x0002
console: MUX: setup E4_242X_DMAREQ2 (0xfa000074): 0x0018 -> 0x0002
console: MUX: setup G4_242X_DMAREQ3 (0xfa000073): 0x0018 -> 0x0002
console: MUX: setup D3_242X_DMAREQ4 (0xfa000072): 0x0018 -> 0x0002
console: MUX: setup E3_242X_DMAREQ5 (0xfa000071): 0x0018 -> 0x0002
console: TUSB 6010
console: OMAP DMA hardware revision 4.0
console: bio: create slab <bio-0> at 0
console: SCSI subsystem initialized
console: i2c_omap i2c_omap.1: bus 1 rev3.4 at 400 kHz
console: i2c_omap i2c_omap.2: bus 2 rev3.4 at 400 kHz
console: Tahvo/Betty driver initialising
console: Betty v2.1 found
console: Retu/Vilma driver initialising
console: Vilma v1.5 found
console: Bluetooth: Core ver 2.15
console: NET: Registered protocol family 31
console: Bluetooth: HCI device and connection manager initialized
console: Bluetooth: HCI socket layer initialized
console: Switching to clocksource 32k_counter
console: musb_hdrc: version 6.0, tusb-omap-dma, peripheral, debug=0
console: tusb: Unable to detect TUSB6010
console: Could not start tusb6010 (-19)
console: musb_hdrc musb_hdrc: musb_init_controller failed with status -19
console: NET: Registered protocol family 2
console: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
console: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
console: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
console: TCP: Hash tables configured (established 4096 bind 4096)
console: TCP reno registered
console: UDP hash table entries: 256 (order: 0, 4096 bytes)
console: UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
console: NET: Registered protocol family 1
console: PMU: registered new PMU device of type 0
console: NetWinder Floating Point Emulator V0.97 (double precision)
console: squashfs: version 4.0 (2009/01/31) Phillip Lougher
console: JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
console: fuse init (API version 7.14)
console: msgmni has been set to 242
console: alg: No test for stdrng (krng)
console: io scheduler noop registered
console: io scheduler cfq registered (default)
console: omapfb: ls041y3 rev 8f LCD detected, 24 data lines
console: omapfb: configured for panel ls041y3
console: omapfb: DISPC version 2.0 initialized
console: omapfb: RFBI version 1.0 initialized
console: omapfb: s1d13745 LCD controller rev 1 initialized (CNF pins 3)
console: omapfb omapfb: s1d1374x: setting update mode to auto
console: Console: switching to colour frame buffer device 100x30
console: omapfb: Framebuffer initialized. Total vram 770048 planes 1
console: omapfb: Pixclock 21940 kHz hfreq 24.9 kHz vfreq 51.0 Hz
console: omap_rng omap_rng: OMAP Random Number Generator ver. 00
console: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console: serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a 16550A
console: serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a 16550A
console: console [ttyS1] enabled
console: serial8250.2: ttyS2 at MMIO 0x4806e000 (irq = 74) is a 16550A
console: brd: module loaded
console: loop: module loaded
console: Menelaus rev 2.2
console: OneNAND driver initializing
console: omap2-onenand omap2-onenand: initializing on CS0, phys base
0x04000000, virtual base c8880000
console: Muxed OneNAND(DDP) 256MB 1.8V 16-bit (0x48)
console: OneNAND version = 0x0000
console: Scanning device for bad blocks
console: Creating 5 MTD partitions on "omap2-onenand":
console: 0x000000000000-0x000000020000 : "bootloader"
console: 0x000000020000-0x000000080000 : "config"
console: 0x000000080000-0x000000280000 : "kernel"
console: 0x000000280000-0x000000680000 : "initfs"
console: 0x000000680000-0x000010000000 : "rootfs"
console: PPP generic driver version 2.4.2
console: PPP Deflate Compression module registered
console: PPP BSD Compression module registered
console: tun: Universal TUN/TAP device driver, 1.6
console: tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
console: mice: PS/2 mouse device common for all mice
console: lm8323 2-0045: sent 2 bytes of -121 total
console: lm8323 2-0045: sending read cmd 0x82 failed
console: lm8323 2-0045: sent 2 bytes of -121 total
console: lm8323 2-0045: sent 2 bytes of -121 total
console: lm8323 2-0045: sent 2 bytes of -121 total
console: lm8323 2-0045: sent 2 bytes of -121 total
console: lm8323 2-0045: sent 2 bytes of -121 total
console: lm8323 2-0045: sent 3 bytes of -121 total
console: lm8323 2-0045: sent 3 bytes of -121 total
console: lm8323 2-0045: sending read cmd 0x80 failed
console: lm8323 2-0045: device not found
console: TSC2005 driver initializing
PASS (2.61 s)
(2/2) tests/avocado/machine_arm_n8x0.py:N8x0Machine.test_n810: /
console: [ 0.000000] Linux version 2.6.35~rc4-129.1-n8x0
(abuild@build08) (gcc version 4.4.2 20091027 (MeeGo 4.4.2-7) (GCC) ) #1
PREEMPT Mon Jul 12 15:04:46 UTC 2010
console: [ 0.000000] CPU: ARMv6-compatible processor [4107b362]
revision 2 (ARMv6TEJ), cr=00c5387f
console: [ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing
instruction cache
console: [ 0.000000] Machine: Nokia N810
console: [ 0.000000] Memory policy: ECC disabled, Data cache writeback
console: [ 0.000000] OMAP2420
console: [ 0.000000]
console: [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000
size: 0x100000
console: [ 0.000000] Built 1 zonelists in Zone order, mobility
grouping on. Total pages: 32512
console: [ 0.000000] Kernel command line: printk.time=0 console=ttyS1
console: PID hash table entries: 512 (order: -1, 2048 bytes)
console: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
console: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
console: Memory: 128MB = 128MB total
console: Memory: 124008k/124008k available, 7064k reserved, 0K highmem
console: Virtual kernel memory layout:
console: vector : 0xffff0000 - 0xffff1000 ( 4 kB)
console: fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
console: DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
console: vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
console: lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
console: modules : 0xbf000000 - 0xc0000000 ( 16 MB)
console: .init : 0xc0008000 - 0xc0029000 ( 132 kB)
console: .text : 0xc0029000 - 0xc0379000 (3392 kB)
console: .data : 0xc038e000 - 0xc03ba2e0 ( 177 kB)
console: SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
console: Hierarchical RCU implementation.
console: RCU-based detection of stalled CPUs is disabled.
console: Verbose stalled-CPUs detection is disabled.
console: NR_IRQS:368
console: ------------[ cut here ]------------
console: WARNING: at arch/arm/mach-omap2/clkt_clksel.c:194
omap2_clksel_recalc+0xcc/0xe0()
console: clock: Could not find fieldval 0 for clock iva1_ifck parent core_ck
console: Modules linked in:
console: [<c002fa1c>] (unwind_backtrace+0x0/0xf0) from [<c0053850>]
(warn_slowpath_common+0x4c/0x64)
console: [<c0053850>] (warn_slowpath_common+0x4c/0x64) from [<c00538e8>]
(warn_slowpath_fmt+0x2c/0x3c)
console: [<c00538e8>] (warn_slowpath_fmt+0x2c/0x3c) from [<c00388b4>]
(omap2_clksel_recalc+0xcc/0xe0)
console: [<c00388b4>] (omap2_clksel_recalc+0xcc/0xe0) from [<c003a91c>]
(propagate_rate+0x20/0x50)
console: [<c003a91c>] (propagate_rate+0x20/0x50) from [<c003a928>]
(propagate_rate+0x2c/0x50)
console: ---[ end trace 1b75b31a2719ed1c ]---
console: ------------[ cut here ]------------
console: WARNING: at arch/arm/mach-omap2/clkt_clksel.c:194
omap2_clksel_recalc+0xcc/0xe0()
console: clock: Could not find fieldval 0 for clock dsp_fck parent core_ck
console: Modules linked in:
console: [<c002fa1c>] (unwind_backtrace+0x0/0xf0) from [<c0053850>]
(warn_slowpath_common+0x4c/0x64)
console: [<c0053850>] (warn_slowpath_common+0x4c/0x64) from [<c00538e8>]
(warn_slowpath_fmt+0x2c/0x3c)
console: [<c00538e8>] (warn_slowpath_fmt+0x2c/0x3c) from [<c00388b4>]
(omap2_clksel_recalc+0xcc/0xe0)
console: [<c00388b4>] (omap2_clksel_recalc+0xcc/0xe0) from [<c003a91c>]
(propagate_rate+0x20/0x50)
console: [<c003a91c>] (propagate_rate+0x20/0x50) from [<c003a928>]
(propagate_rate+0x2c/0x50)
console: ---[ end trace 1b75b31a2719ed1d ]---
console: ------------[ cut here ]------------
console: WARNING: at arch/arm/mach-omap2/clkt_clksel.c:194
omap2_clksel_recalc+0xcc/0xe0()
console: clock: Could not find fieldval 0 for clock dsp_irate_ick parent
dsp_fck
console: Modules linked in:
console: [<c002fa1c>] (unwind_backtrace+0x0/0xf0) from [<c0053850>]
(warn_slowpath_common+0x4c/0x64)
console: [<c0053850>] (warn_slowpath_common+0x4c/0x64) from [<c00538e8>]
(warn_slowpath_fmt+0x2c/0x3c)
console: [<c00538e8>] (warn_slowpath_fmt+0x2c/0x3c) from [<c00388b4>]
(omap2_clksel_recalc+0xcc/0xe0)
console: [<c00388b4>] (omap2_clksel_recalc+0xcc/0xe0) from [<c003a91c>]
(propagate_rate+0x20/0x50)
console: [<c003a91c>] (propagate_rate+0x20/0x50) from [<c003a928>]
(propagate_rate+0x2c/0x50)
console: ---[ end trace 1b75b31a2719ed1e ]---
console: Clocking rate (Crystal/DPLL/MPU): 19.2/658/329 MHz
console: omap_hwmod: l3_hwmod: cannot be enabled (3)
console: omap_hwmod: l4_core_hwmod: cannot be enabled (3)
console: omap_hwmod: l4_wkup_hwmod: cannot be enabled (3)
console: GPMC revision 2.0
console: IRQ: Found an INTC at 0xfa0fe000 (revision 2.1) with 96 interrupts
console: Total of 96 interrupts on 1 active controller
console: OMAP GPIO hardware version 1.8
console: OMAP clockevent source: GPTIMER1 at 32000 Hz
console: Console: colour dummy device 80x30
console: Calibrating delay loop... 803.49 BogoMIPS (lpj=3137536)
console: pid_max: default: 32768 minimum: 301
console: Mount-cache hash table entries: 512
console: CPU: Testing write buffer coherency: ok
console: devtmpfs: initialized
console: NET: Registered protocol family 16
console: MUX: setup L15_24XX_I2C1_SDA (0xfa000112): 0x0018 -> 0x0000
console: MUX: setup M19_24XX_I2C1_SCL (0xfa000111): 0x0018 -> 0x0000
console: MUX: setup H19_24XX_I2C2_SDA (0xfa000114): 0x001f -> 0x0000
console: MUX: setup J15_24XX_I2C2_SCL (0xfa000113): 0x001f -> 0x0010
console: N8x0 MIPID config loaded
console: N8x0 Blizzard initialized
console: MUX: setup H18_24XX_MMC_CMD (0xfa0000f4): 0x001f -> 0x0000
console: MUX: setup H15_24XX_MMC_CLKI (0xfa0000fe): 0x001f -> 0x0000
console: MUX: setup G19_24XX_MMC_CLKO (0xfa0000f3): 0x000f -> 0x0000
console: MUX: setup F20_24XX_MMC_DAT0 (0xfa0000f5): 0x000f -> 0x0000
console: MUX: setup F19_24XX_MMC_DAT_DIR0 (0xfa0000f9): 0x000f -> 0x0000
console: MUX: setup G18_24XX_MMC_CMD_DIR (0xfa0000fd): 0x000f -> 0x0000
console: MUX: setup H14_24XX_MMC_DAT1 (0xfa0000f6): 0x001f -> 0x0000
console: MUX: setup E19_24XX_MMC_DAT2 (0xfa0000f7): 0x000f -> 0x0000
console: MUX: setup D19_24XX_MMC_DAT3 (0xfa0000f8): 0x000f -> 0x0000
console: MUX: setup E20_24XX_MMC_DAT_DIR1 (0xfa0000fa): 0x000f -> 0x0000
console: MUX: setup F18_24XX_MMC_DAT_DIR2 (0xfa0000fb): 0x000f -> 0x0000
console: MUX: setup E18_24XX_MMC_DAT_DIR3 (0xfa0000fc): 0x001f -> 0x0000
console: MUX: setup AA10_242X_DMAREQ0 (0xfa0000e5): 0x001f -> 0x0002
console: MUX: setup AA6_242X_DMAREQ1 (0xfa0000e6): 0x000f -> 0x0002
console: MUX: setup E4_242X_DMAREQ2 (0xfa000074): 0x0018 -> 0x0002
console: MUX: setup G4_242X_DMAREQ3 (0xfa000073): 0x0018 -> 0x0002
console: MUX: setup D3_242X_DMAREQ4 (0xfa000072): 0x0018 -> 0x0002
console: MUX: setup E3_242X_DMAREQ5 (0xfa000071): 0x0018 -> 0x0002
console: TUSB 6010
console: OMAP DMA hardware revision 4.0
console: bio: create slab <bio-0> at 0
console: SCSI subsystem initialized
console: i2c_omap i2c_omap.1: bus 1 rev3.4 at 400 kHz
console: i2c_omap i2c_omap.2: bus 2 rev3.4 at 400 kHz
console: Tahvo/Betty driver initialising
console: Betty v2.1 found
console: Retu/Vilma driver initialising
console: Vilma v1.5 found
console: Bluetooth: Core ver 2.15
console: NET: Registered protocol family 31
console: Bluetooth: HCI device and connection manager initialized
console: Bluetooth: HCI socket layer initialized
console: Switching to clocksource 32k_counter
console: musb_hdrc: version 6.0, tusb-omap-dma, peripheral, debug=0
console: tusb: Unable to detect TUSB6010
console: Could not start tusb6010 (-19)
console: musb_hdrc musb_hdrc: musb_init_controller failed with status -19
console: NET: Registered protocol family 2
console: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
console: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
console: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
console: TCP: Hash tables configured (established 4096 bind 4096)
console: TCP reno registered
console: UDP hash table entries: 256 (order: 0, 4096 bytes)
console: UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
console: NET: Registered protocol family 1
console: PMU: registered new PMU device of type 0
console: NetWinder Floating Point Emulator V0.97 (double precision)
console: squashfs: version 4.0 (2009/01/31) Phillip Lougher
console: JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
console: fuse init (API version 7.14)
console: msgmni has been set to 242
console: alg: No test for stdrng (krng)
console: io scheduler noop registered
console: io scheduler cfq registered (default)
console: omapfb: ls041y3 rev 8f LCD detected, 24 data lines
console: omapfb: configured for panel ls041y3
console: omapfb: DISPC version 2.0 initialized
console: omapfb: RFBI version 1.0 initialized
console: omapfb: s1d13745 LCD controller rev 1 initialized (CNF pins 3)
console: omapfb omapfb: s1d1374x: setting update mode to auto
console: Console: switching to colour frame buffer device 100x30
console: omapfb: Framebuffer initialized. Total vram 770048 planes 1
console: omapfb: Pixclock 21940 kHz hfreq 24.9 kHz vfreq 51.0 Hz
console: omap_rng omap_rng: OMAP Random Number Generator ver. 00
console: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console: serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a 16550A
console: serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a 16550A
console: console [ttyS1] enabled
console: serial8250.2: ttyS2 at MMIO 0x4806e000 (irq = 74) is a 16550A
console: brd: module loaded
console: loop: module loaded
-console: Menelaus rev 2.2
console: OneNAND driver initializing
console: omap2-onenand omap2-onenand: initializing on CS0, phys base
0x04000000, virtual base c8880000
console: Muxed OneNAND(DDP) 256MB 1.8V 16-bit (0x48)
console: OneNAND version = 0x0000
console: Scanning device for bad blocks
console: Creating 5 MTD partitions on "omap2-onenand":
console: 0x000000000000-0x000000020000 : "bootloader"
console: 0x000000020000-0x000000080000 : "config"
console: 0x000000080000-0x000000280000 : "kernel"
console: 0x000000280000-0x000000680000 : "initfs"
console: 0x000000680000-0x000010000000 : "rootfs"
console: PPP generic driver version 2.4.2
console: PPP Deflate Compression module registered
console: PPP BSD Compression module registered
console: tun: Universal TUN/TAP device driver, 1.6
console: tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
console: mice: PS/2 mouse device common for all mice
console: lm8323 2-0045: sent 2 bytes of -121 total
console: lm8323 2-0045: sending read cmd 0x82 failed
console: lm8323 2-0045: sent 2 bytes of -121 total
console: lm8323 2-0045: sent 2 bytes of -121 total
console: lm8323 2-0045: sent 2 bytes of -121 total
console: lm8323 2-0045: sent 2 bytes of -121 total
console: lm8323 2-0045: sent 2 bytes of -121 total
console: lm8323 2-0045: sent 3 bytes of -121 total
console: lm8323 2-0045: sent 3 bytes of -121 total
console: lm8323 2-0045: sending read cmd 0x80 failed
console: lm8323 2-0045: device not found
console: TSC2005 driver initializing
PASS (2.30 s)
RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 |
CANCEL 0
JOB TIME : 5.49 s
