On Fri, Nov 08, 2024 at 12:52:37PM +0000, Shameer Kolothum wrote: > Few ToDos to note, > 1. At present default-bus-bypass-iommu=on should be set when > arm-smmuv3-nested dev is specified. Otherwise you may get an IORT > related boot error. Requires fixing. > 2. Hot adding a device is not working at the moment. Looks like pcihp irq > issue. > Could be a bug in IORT id mappings.
Do we have enough bus number space for each pbx bus in IORT? The bus range is defined by min_/max_bus in hort_host_bridges(), where the pci_bus_range() function call might not leave enough space in the range for hotplugs IIRC. > ./qemu-system-aarch64 -machine virt,gic-version=3,default-bus-bypass-iommu=on > \ > -enable-kvm -cpu host -m 4G -smp cpus=8,maxcpus=8 \ > -object iommufd,id=iommufd0 \ > -bios QEMU_EFI.fd \ > -kernel Image \ > -device virtio-blk-device,drive=fs \ > -drive if=none,file=rootfs.qcow2,id=fs \ > -device pxb-pcie,id=pcie.1,bus_nr=8,bus=pcie.0 \ > -device pcie-root-port,id=pcie.port1,bus=pcie.1,chassis=1 \ > -device arm-smmuv3-nested,id=smmuv1,pci-bus=pcie.1 \ > -device vfio-pci,host=0000:7d:02.1,bus=pcie.port1,iommufd=iommufd0 \ > -device pxb-pcie,id=pcie.2,bus_nr=16,bus=pcie.0 \ > -device pcie-root-port,id=pcie.port2,bus=pcie.2,chassis=2 \ > -device arm-smmuv3-nested,id=smmuv2,pci-bus=pcie.2 \ > -device vfio-pci,host=0000:75:00.1,bus=pcie.port2,iommufd=iommufd0 \ > -append "rdinit=init console=ttyAMA0 root=/dev/vda2 rw > earlycon=pl011,0x9000000" \ > -device virtio-9p-pci,fsdev=p9fs2,mount_tag=p9,bus=pcie.0 \ > -fsdev local,id=p9fs2,path=p9root,security_model=mapped \ > -net none \ > -nographic .. > With a pci topology like below, > [root@localhost ~]# lspci -tv > -+-[0000:00]-+-00.0 Red Hat, Inc. QEMU PCIe Host bridge > | +-01.0 Red Hat, Inc. QEMU PCIe Expander bridge > | +-02.0 Red Hat, Inc. QEMU PCIe Expander bridge > | \-03.0 Virtio: Virtio filesystem > +-[0000:08]---00.0-[09]----00.0 Huawei Technologies Co., Ltd. HNS Network > Controller (Virtual Function) > \-[0000:10]---00.0-[11]----00.0 Huawei Technologies Co., Ltd. HiSilicon ZIP > Engine(Virtual Function) > [root@localhost ~]# > > And if you want to add another HNS VF, it should be added to the same SMMUv3 > as of the first HNS dev, > > -device pcie-root-port,id=pcie.port3,bus=pcie.1,chassis=3 \ > -device vfio-pci,host=0000:7d:02.2,bus=pcie.port3,iommufd=iommufd0 \ .. > At present Qemu is not doing any extra validation other than the above > failure to make sure the user configuration is correct or not. The > assumption is libvirt will take care of this. Nathan from NVIDIA side is working on the libvirt. And he already did some prototype coding in libvirt that could generate required PCI topology. I think he can take this patches for a combined test. Thanks Nicolin
