Improve awkward phrasing in migrate-incoming While there. Signed-off-by: Markus Armbruster <arm...@redhat.com> Message-ID: <20250527073916.1243024-7-arm...@redhat.com> Reviewed-by: Eric Blake <ebl...@redhat.com> --- qapi/audio.json | 8 ++++---- qapi/block-core.json | 10 +++++----- qapi/block-export.json | 2 +- qapi/char.json | 6 +++--- qapi/introspect.json | 4 ++-- qapi/migration.json | 8 ++++---- qapi/run-state.json | 6 +++--- qapi/transaction.json | 2 +- qapi/uefi.json | 2 +- qapi/ui.json | 4 ++-- 10 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/qapi/audio.json b/qapi/audio.json index 8de4430578..16de231f6d 100644 --- a/qapi/audio.json +++ b/qapi/audio.json @@ -309,9 +309,9 @@ # # @name: name of the sink/source to use # -# @stream-name: name of the PulseAudio stream created by qemu. Can be +# @stream-name: name of the PulseAudio stream created by QEMU. Can be # used to identify the stream in PulseAudio when you create -# multiple PulseAudio devices or run multiple qemu instances +# multiple PulseAudio devices or run multiple QEMU instances # (default: audiodev's id, since 4.2) # # @latency: latency you want PulseAudio to achieve in microseconds @@ -353,9 +353,9 @@ # # @name: name of the sink/source to use # -# @stream-name: name of the PipeWire stream created by qemu. Can be +# @stream-name: name of the PipeWire stream created by QEMU. Can be # used to identify the stream in PipeWire when you create multiple -# PipeWire devices or run multiple qemu instances (default: +# PipeWire devices or run multiple QEMU instances (default: # audiodev's id) # # @latency: latency you want PipeWire to achieve in microseconds diff --git a/qapi/block-core.json b/qapi/block-core.json index cc48fc7122..b6447e847e 100644 --- a/qapi/block-core.json +++ b/qapi/block-core.json @@ -2030,7 +2030,7 @@ # # @id: Block graph node identifier. This @id is generated only for # x-debug-query-block-graph and does not relate to any other -# identifiers in Qemu. +# identifiers in QEMU. # # @type: Type of graph node. Can be one of block-backend, block-job # or block-driver-state. @@ -2794,7 +2794,7 @@ # The node that receives the data is called the top image, can be # located in any part of the chain (but always above the base image; # see below) and can be specified using its device or node name. -# Earlier qemu versions only allowed 'device' to name the top level +# Earlier QEMU versions only allowed 'device' to name the top level # node; presence of the 'base-node' parameter during introspection can # be used as a witness of the enhanced semantics of 'device'. # @@ -3196,7 +3196,7 @@ # # Selects the AIO backend to handle I/O requests # -# @threads: Use qemu's thread pool +# @threads: Use QEMU's thread pool # # @native: Use native AIO backend (only Linux and Windows) # @@ -5157,10 +5157,10 @@ ## # @BlockdevQcow2Version: # -# @v2: The original QCOW2 format as introduced in qemu 0.10 (version +# @v2: The original QCOW2 format as introduced in QEMU 0.10 (version # 2) # -# @v3: The extended QCOW2 format as introduced in qemu 1.1 (version 3) +# @v3: The extended QCOW2 format as introduced in QEMU 1.1 (version 3) # # Since: 2.12 ## diff --git a/qapi/block-export.json b/qapi/block-export.json index 04190b503c..ed4deb54db 100644 --- a/qapi/block-export.json +++ b/qapi/block-export.json @@ -169,7 +169,7 @@ # @growable: Whether writes beyond the EOF should grow the block node # accordingly. (default: false) # -# @allow-other: If this is off, only qemu's user is allowed access to +# @allow-other: If this is off, only QEMU's user is allowed access to # this export. That cannot be changed even with chmod or chown. # Enabling this option will allow other users access to the export # with the FUSE mount option "allow_other". Note that using diff --git a/qapi/char.json b/qapi/char.json index f79216e4d2..df6e325e2e 100644 --- a/qapi/char.json +++ b/qapi/char.json @@ -351,7 +351,7 @@ # Configuration info for stdio chardevs. # # @signal: Allow signals (such as SIGINT triggered by ^C) be delivered -# to qemu. Default: true. +# to QEMU. Default: true. # # Since: 1.5 ## @@ -443,7 +443,7 @@ ## # @ChardevQemuVDAgent: # -# Configuration info for qemu vdagent implementation. +# Configuration info for QEMU vdagent implementation. # # @mouse: enable/disable mouse, default is enabled. # @@ -656,7 +656,7 @@ ## # @ChardevQemuVDAgentWrapper: # -# @data: Configuration info for qemu vdagent implementation +# @data: Configuration info for QEMU vdagent implementation # # Since: 6.1 ## diff --git a/qapi/introspect.json b/qapi/introspect.json index 95724ee2d2..e9e0297282 100644 --- a/qapi/introspect.json +++ b/qapi/introspect.json @@ -26,9 +26,9 @@ # the QAPI schema. # # Furthermore, while we strive to keep the QMP wire format -# backwards-compatible across qemu versions, the introspection output +# backwards-compatible across QEMU versions, the introspection output # is not guaranteed to have the same stability. For example, one -# version of qemu may list an object member as an optional +# version of QEMU may list an object member as an optional # non-variant, while another lists the same member only through the # object's variants; or the type of a member may change from a generic # string into a specific enum or from one specific type into an diff --git a/qapi/migration.json b/qapi/migration.json index 7d1ec06605..84edcf81e4 100644 --- a/qapi/migration.json +++ b/qapi/migration.json @@ -415,7 +415,7 @@ # on secondary side, this process is called COarse-Grain LOck # Stepping (COLO) for Non-stop Service. (since 2.8) # -# @release-ram: if enabled, qemu will free the migrated ram pages on +# @release-ram: if enabled, QEMU will free the migrated ram pages on # the source during postcopy-ram migration. (since 2.9) # # @return-path: If enabled, migration will use the return path even @@ -1500,7 +1500,7 @@ ## # @x-colo-lost-heartbeat: # -# Tell qemu that heartbeat is lost, request it to do takeover +# Tell QEMU that heartbeat is lost, request it to do takeover # procedures. If this command is sent to the PVM, the Primary side # will exit COLO mode. If sent to the Secondary, the Secondary side # will run failover work, then takes over server operation to become @@ -1729,8 +1729,8 @@ ## # @migrate-incoming: # -# Start an incoming migration, the qemu must have been started with -# -incoming defer +# Start an incoming migration. QEMU must have been started with +# -incoming defer. # # @uri: The Uniform Resource Identifier identifying the source or # address to listen on diff --git a/qapi/run-state.json b/qapi/run-state.json index ebfeb669ab..fcc00c805b 100644 --- a/qapi/run-state.json +++ b/qapi/run-state.json @@ -135,19 +135,19 @@ ## # @SHUTDOWN: # -# Emitted when the virtual machine has shut down, indicating that qemu +# Emitted when the virtual machine has shut down, indicating that QEMU # is about to exit. # # @guest: If true, the shutdown was triggered by a guest request (such # as a guest-initiated ACPI shutdown request or other # hardware-specific action) rather than a host request (such as -# sending qemu a SIGINT). (since 2.10) +# sending QEMU a SIGINT). (since 2.10) # # @reason: The @ShutdownCause which resulted in the SHUTDOWN. # (since 4.0) # # .. note:: If the command-line option ``-no-shutdown`` has been -# specified, qemu will not exit, and a STOP event will eventually +# specified, QEMU will not exit, and a STOP event will eventually # follow the SHUTDOWN event. # # Since: 0.12 diff --git a/qapi/transaction.json b/qapi/transaction.json index 021e383496..5c3394919e 100644 --- a/qapi/transaction.json +++ b/qapi/transaction.json @@ -223,7 +223,7 @@ # exists, the request will be rejected. Only some image formats # support it, for example, qcow2, and rbd, # -# On failure, qemu will try delete the newly created internal snapshot +# On failure, QEMU will try delete the newly created internal snapshot # in the transaction. When an I/O error occurs during deletion, the # user needs to fix it later with qemu-img or other command. # diff --git a/qapi/uefi.json b/qapi/uefi.json index bdfcabe1df..6592183d6c 100644 --- a/qapi/uefi.json +++ b/qapi/uefi.json @@ -5,7 +5,7 @@ ## # = UEFI Variable Store # -# The qemu efi variable store implementation (hw/uefi/) uses this to +# The QEMU efi variable store implementation (hw/uefi/) uses this to # store non-volatile variables in json format on disk. # # This is an existing format already supported by (at least) two other diff --git a/qapi/ui.json b/qapi/ui.json index 7cfedb3914..514fa159b1 100644 --- a/qapi/ui.json +++ b/qapi/ui.json @@ -1526,12 +1526,12 @@ # # Display (user interface) options. # -# @type: Which DisplayType qemu should use. +# @type: Which DisplayType QEMU should use. # # @full-screen: Start user interface in fullscreen mode # (default: off). # -# @window-close: Allow to quit qemu with window close button +# @window-close: Allow to quit QEMU with window close button # (default: on). # # @show-cursor: Force showing the mouse cursor (default: off). -- 2.48.1
