On Thu, Oct 31, 2013 at 12:32:12PM +0100, Paolo Bonzini wrote:
> Il 28/10/2013 20:01, Michael S. Tsirkin ha scritto:
> > From: Alexander Graf <ag...@suse.de>
> >
> > When AHCI executes an asynchronous IDE command, it checked DRDY without
> > checking either DRQ or BSY. This sometimes caused interrupt to be sent
> > before command is actually completed.
> >
> > This resulted in a race condition: if guest then managed to access the
> > device before command has completed, it would hang waiting for an
> > interrupt.
> > This was observed with windows 7 guests.
> >
> > To fix, check for DRQ or BSY in additiona to DRDY, if set,
> > the command is asynchronous so delay the interrupt until
> > asynchronous done callback is invoked.
> >
> > Reported-by: Michael S. Tsirkin <m...@redhat.com>
> > Reviewed-by: Michael S. Tsirkin <m...@redhat.com>
> > Tested-by: Michael S. Tsirkin <m...@redhat.com>
> > Signed-off-by: Michael S. Tsirkin <m...@redhat.com>
> >
> > ---
> > hw/ide/ahci.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
> > index a8be62c..fbea9e8 100644
> > --- a/hw/ide/ahci.c
> > +++ b/hw/ide/ahci.c
> > @@ -961,7 +961,8 @@ static int handle_cmd(AHCIState *s, int port, int slot)
> > /* We're ready to process the command in FIS byte 2. */
> > ide_exec_cmd(&s->dev[port].port, cmd_fis[2]);
> >
> > - if (s->dev[port].port.ifs[0].status & READY_STAT) {
> > + if ((s->dev[port].port.ifs[0].status &
> > (READY_STAT|DRQ_STAT|BUSY_STAT)) ==
> > + READY_STAT) {
> > ahci_write_fis_d2h(&s->dev[port], cmd_fis);
> > }
> > }
> >
>
> While the patch fixes the symptom, I think it is only a bandaid.
>
> There is no reason why the async_cmd_done should be restricted to
> asynchronous commands. If synchronous commands are made to go through
> the async_cmd_done callback, you'll automatically get the D2H FIS
> written for all commands.
I suggested this to Kevin offline but he prefers it like this.
> It's good for 1.7, but let's revisit it for 1.8.
>
> Paolo
Fine with me.
