On Tue, Feb 25, 2014 at 6:23 AM, Peter Maydell <peter.mayd...@linaro.org> wrote:
> Newer versions of the Linux kernel (as of commit bc41b8724 in 3.12)
> now assume that if the CPU is a Cortex-A9 and the reset value of the
> PERIPHBASE/CBAR register is zero then the CPU is a specific buggy
> single core A9 SoC, and will not try to start other cores. Since we
> now have a CPU property for the reset value of the CBAR, we can
> just fix the vexpress board model to correctly set CBAR so SMP
> works again. To avoid duplicate boilerplate code in both the A9
> and A15 daughterboard init functions, we split out the CPU and
> private memory region init to its own function.
>
> Signed-off-by: Peter Maydell <peter.mayd...@linaro.org>
> Reported-by: Rob Herring <rob.herr...@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwa...@xilinx.com>
> ---
> hw/arm/vexpress.c | 123
> +++++++++++++++++++++++++++---------------------------
> 1 file changed, 61 insertions(+), 62 deletions(-)
>
> diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c
> index ef1707a..67628af 100644
> --- a/hw/arm/vexpress.c
> +++ b/hw/arm/vexpress.c
> @@ -32,6 +32,7 @@
> #include "sysemu/blockdev.h"
> #include "hw/block/flash.h"
> #include "sysemu/device_tree.h"
> +#include "qemu/error-report.h"
> #include <libfdt.h>
>
> #define VEXPRESS_BOARD_ID 0x8e0
> @@ -173,6 +174,64 @@ struct VEDBoardInfo {
> DBoardInitFn *init;
> };
>
> +static void init_cpus(const char *cpu_model, const char *privdev,
> + hwaddr periphbase, qemu_irq *pic)
> +{
> + ObjectClass *cpu_oc = cpu_class_by_name(TYPE_ARM_CPU, cpu_model);
> + DeviceState *dev;
> + SysBusDevice *busdev;
> + int n;
> +
> + if (!cpu_oc) {
> + fprintf(stderr, "Unable to find CPU definition\n");
> + exit(1);
> + }
> +
> + /* Create the actual CPUs */
> + for (n = 0; n < smp_cpus; n++) {
> + Object *cpuobj = object_new(object_class_get_name(cpu_oc));
> + Error *err = NULL;
> +
> + object_property_set_int(cpuobj, periphbase, "reset-cbar", &err);
> + if (err) {
> + error_report("%s", error_get_pretty(err));
> + exit(1);
> + }
> + object_property_set_bool(cpuobj, true, "realized", &err);
> + if (err) {
> + error_report("%s", error_get_pretty(err));
> + exit(1);
> + }
> + }
> +
> + /* Create the private peripheral devices (including the GIC);
> + * this must happen after the CPUs are created because a15mpcore_priv
> + * wires itself up to the CPU's generic_timer gpio out lines.
> + */
> + dev = qdev_create(NULL, privdev);
> + qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
> + qdev_init_nofail(dev);
> + busdev = SYS_BUS_DEVICE(dev);
> + sysbus_mmio_map(busdev, 0, periphbase);
> +
> + /* Interrupts [42:0] are from the motherboard;
> + * [47:43] are reserved; [63:48] are daughterboard
> + * peripherals. Note that some documentation numbers
> + * external interrupts starting from 32 (because there
> + * are internal interrupts 0..31).
> + */
> + for (n = 0; n < 64; n++) {
> + pic[n] = qdev_get_gpio_in(dev, n);
> + }
> +
> + /* Connect the CPUs to the GIC */
> + for (n = 0; n < smp_cpus; n++) {
> + DeviceState *cpudev = DEVICE(qemu_get_cpu(n));
> +
> + sysbus_connect_irq(busdev, n, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
> + }
> +}
> +
> static void a9_daughterboard_init(const VEDBoardInfo *daughterboard,
> ram_addr_t ram_size,
> const char *cpu_model,
> @@ -181,25 +240,12 @@ static void a9_daughterboard_init(const VEDBoardInfo
> *daughterboard,
> MemoryRegion *sysmem = get_system_memory();
> MemoryRegion *ram = g_new(MemoryRegion, 1);
> MemoryRegion *lowram = g_new(MemoryRegion, 1);
> - DeviceState *dev;
> - SysBusDevice *busdev;
> - int n;
> - qemu_irq cpu_irq[4];
> ram_addr_t low_ram_size;
>
> if (!cpu_model) {
> cpu_model = "cortex-a9";
> }
>
> - for (n = 0; n < smp_cpus; n++) {
> - ARMCPU *cpu = cpu_arm_init(cpu_model);
> - if (!cpu) {
> - fprintf(stderr, "Unable to find CPU definition\n");
> - exit(1);
> - }
> - cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ);
> - }
> -
> if (ram_size > 0x40000000) {
> /* 1GB is the maximum the address space permits */
> fprintf(stderr, "vexpress-a9: cannot model more than 1GB RAM\n");
> @@ -221,23 +267,7 @@ static void a9_daughterboard_init(const VEDBoardInfo
> *daughterboard,
> memory_region_add_subregion(sysmem, 0x60000000, ram);
>
> /* 0x1e000000 A9MPCore (SCU) private memory region */
> - dev = qdev_create(NULL, "a9mpcore_priv");
> - qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
> - qdev_init_nofail(dev);
> - busdev = SYS_BUS_DEVICE(dev);
> - sysbus_mmio_map(busdev, 0, 0x1e000000);
> - for (n = 0; n < smp_cpus; n++) {
> - sysbus_connect_irq(busdev, n, cpu_irq[n]);
> - }
> - /* Interrupts [42:0] are from the motherboard;
> - * [47:43] are reserved; [63:48] are daughterboard
> - * peripherals. Note that some documentation numbers
> - * external interrupts starting from 32 (because the
> - * A9MP has internal interrupts 0..31).
> - */
> - for (n = 0; n < 64; n++) {
> - pic[n] = qdev_get_gpio_in(dev, n);
> - }
> + init_cpus(cpu_model, "a9mpcore_priv", 0x1e000000, pic);
>
> /* Daughterboard peripherals : 0x10020000 .. 0x20000000 */
>
> @@ -296,29 +326,14 @@ static void a15_daughterboard_init(const VEDBoardInfo
> *daughterboard,
> const char *cpu_model,
> qemu_irq *pic)
> {
> - int n;
> MemoryRegion *sysmem = get_system_memory();
> MemoryRegion *ram = g_new(MemoryRegion, 1);
> MemoryRegion *sram = g_new(MemoryRegion, 1);
> - qemu_irq cpu_irq[4];
> - DeviceState *dev;
> - SysBusDevice *busdev;
>
> if (!cpu_model) {
> cpu_model = "cortex-a15";
> }
>
> - for (n = 0; n < smp_cpus; n++) {
> - ARMCPU *cpu;
> -
> - cpu = cpu_arm_init(cpu_model);
> - if (!cpu) {
> - fprintf(stderr, "Unable to find CPU definition\n");
> - exit(1);
> - }
> - cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ);
> - }
> -
> {
> /* We have to use a separate 64 bit variable here to avoid the gcc
> * "comparison is always false due to limited range of data type"
> @@ -337,23 +352,7 @@ static void a15_daughterboard_init(const VEDBoardInfo
> *daughterboard,
> memory_region_add_subregion(sysmem, 0x80000000, ram);
>
> /* 0x2c000000 A15MPCore private memory region (GIC) */
> - dev = qdev_create(NULL, "a15mpcore_priv");
> - qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
> - qdev_init_nofail(dev);
> - busdev = SYS_BUS_DEVICE(dev);
> - sysbus_mmio_map(busdev, 0, 0x2c000000);
> - for (n = 0; n < smp_cpus; n++) {
> - sysbus_connect_irq(busdev, n, cpu_irq[n]);
> - }
> - /* Interrupts [42:0] are from the motherboard;
> - * [47:43] are reserved; [63:48] are daughterboard
> - * peripherals. Note that some documentation numbers
> - * external interrupts starting from 32 (because there
> - * are internal interrupts 0..31).
> - */
> - for (n = 0; n < 64; n++) {
> - pic[n] = qdev_get_gpio_in(dev, n);
> - }
> + init_cpus(cpu_model, "a15mpcore_priv", 0x2c000000, pic);
>
> /* A15 daughterboard peripherals: */
>
> --
> 1.8.5
>
>
