On Wed, Jun 25, 2014 at 09:46:40AM +0300, Marcel Apfelbaum wrote:
> On Wed, 2014-06-25 at 08:20 +0300, Michael S. Tsirkin wrote:
> > On Tue, Jun 24, 2014 at 03:02:03PM -0300, Eduardo Habkost wrote:
> > > The QEMU_COMPAT_* macros will contain compat properties that are not
> > > specific to PC, and may be reused by other machine-types.
> > >
> > > PC-specific properties were left on the PC_COMPAT_* macros.
> > >
> > > Signed-off-by: Eduardo Habkost <ehabk...@redhat.com>
> > > ---
> > > include/hw/boards.h | 161
> > > +++++++++++++++++++++++++++++++++++++++++++++++++++
> > > include/hw/i386/pc.h | 150
> > > ++---------------------------------------------
> > > 2 files changed, 166 insertions(+), 145 deletions(-)
> > >
> > > diff --git a/include/hw/boards.h b/include/hw/boards.h
> > > index 605a970..709b582 100644
> > > --- a/include/hw/boards.h
> > > +++ b/include/hw/boards.h
> > > @@ -134,4 +134,165 @@ struct MachineState {
> > > const char *cpu_model;
> > > };
> > >
> > > +
> > > +/* Macros for compat_props corresponding to specific QEMU versions: */
> > > +
> > > +#define QEMU_COMPAT_2_0 \
> > > + {\
> > > + .driver = "virtio-scsi-pci",\
> > > + .property = "any_layout",\
> > > + .value = "off",\
> > > + },\
> > > + {\
> > > + .driver = "apic",\
> > > + .property = "version",\
> > > + .value = stringify(0x11),\
> > > + },\
> > > + {\
> > > + .driver = "nec-usb-xhci",\
> > > + .property = "superspeed-ports-first",\
> > > + .value = "off",\
> > > + },\
> > > + {\
> > > + .driver = "pci-serial",\
> > > + .property = "prog_if",\
> > > + .value = stringify(0),\
> > > + },\
> > > + {\
> > > + .driver = "pci-serial-2x",\
> > > + .property = "prof_if",\
> > > + .value = stringify(0),\
> > > + },\
> > > + {\
> > > + .driver = "pci-serial-4x",\
> > > + .property = "prog_if",\
> > > + .value = stringify(0),\
> > > + },\
> > > + {\
> > > + .driver = "virtio-net-pci",\
> > > + .property = "guest_announce",\
> > > + .value = "off",\
> > > + }
> > > +
> > > +#define QEMU_COMPAT_1_7 \
> > > + {\
> > > + .driver = TYPE_USB_DEVICE,\
> > > + .property = "msos-desc",\
> > > + .value = "no",\
> > > + }
> > > +
> > > +#define QEMU_COMPAT_1_6 \
> > > + {\
> > > + .driver = "e1000",\
> > > + .property = "mitigation",\
> > > + .value = "off",\
> > > + },{\
> > > + .driver = "qemu64-" TYPE_X86_CPU,\
> > > + .property = "model",\
> > > + .value = stringify(2),\
> > > + },{\
> > > + .driver = "qemu32-" TYPE_X86_CPU,\
> > > + .property = "model",\
> > > + .value = stringify(3),\
> > > + }
> > > +
> > > +#define QEMU_COMPAT_1_5 \
> > > + {\
> > > + .driver = "Conroe-" TYPE_X86_CPU,\
> > > + .property = "model",\
> > > + .value = stringify(2),\
> > > + },{\
> > > + .driver = "Conroe-" TYPE_X86_CPU,\
> > > + .property = "level",\
> > > + .value = stringify(2),\
> > > + },{\
> > > + .driver = "Penryn-" TYPE_X86_CPU,\
> > > + .property = "model",\
> > > + .value = stringify(2),\
> > > + },{\
> > > + .driver = "Penryn-" TYPE_X86_CPU,\
> > > + .property = "level",\
> > > + .value = stringify(2),\
> > > + },{\
> > > + .driver = "Nehalem-" TYPE_X86_CPU,\
> > > + .property = "model",\
> > > + .value = stringify(2),\
> > > + },{\
> > > + .driver = "Nehalem-" TYPE_X86_CPU,\
> > > + .property = "level",\
> > > + .value = stringify(2),\
> >
> > Above are x86 CPUs - why have them in a common header?
> > There's no chance any machine except PIIX&Q35 needs these.
> >
> > > + .driver = "virtio-net-pci",\
> > > + .property = "any_layout",\
> > > + .value = "off",\
> >
> > Here's an example.
> > If you are using a non x86 target, QEMU 2.0
> > has no way to select a machine with this
> > value.
> > So why expose it?
> As we talked on the KVM call, the objective is to assign the
> compat properties per QEMU version and close to their device.
> As a *middle* step we shall put all together in a common file
> per version and not per machine type, and then work on a registration
> mechanism that will be based on the fact that compat properties
> are per device and versioned by QEMU.
>
> Thanks,
> Marcel
Yes but that'll stay on a branch and get merged after 2.1.
Let's keep this patch on that branch there as well.
> >
> >
> > > + },{\
> > > + .driver = TYPE_X86_CPU,\
> > > + .property = "pmu",\
> > > + .value = "on",\
> > > + }
> > > +
> > > +#define QEMU_COMPAT_1_4 \
> > > + {\
> > > + .driver = "scsi-hd",\
> > > + .property = "discard_granularity",\
> > > + .value = stringify(0),\
> > > + },{\
> > > + .driver = "scsi-cd",\
> > > + .property = "discard_granularity",\
> > > + .value = stringify(0),\
> > > + },{\
> > > + .driver = "scsi-disk",\
> > > + .property = "discard_granularity",\
> > > + .value = stringify(0),\
> > > + },{\
> > > + .driver = "ide-hd",\
> > > + .property = "discard_granularity",\
> > > + .value = stringify(0),\
> > > + },{\
> > > + .driver = "ide-cd",\
> > > + .property = "discard_granularity",\
> > > + .value = stringify(0),\
> > > + },{\
> > > + .driver = "ide-drive",\
> > > + .property = "discard_granularity",\
> > > + .value = stringify(0),\
> > > + },{\
> > > + .driver = "virtio-blk-pci",\
> > > + .property = "discard_granularity",\
> > > + .value = stringify(0),\
> > > + },{\
> > > + .driver = "virtio-serial-pci",\
> > > + .property = "vectors",\
> > > + /* DEV_NVECTORS_UNSPECIFIED as a uint32_t string */\
> > > + .value = stringify(0xFFFFFFFF),\
> > > + },{ \
> > > + .driver = "virtio-net-pci", \
> > > + .property = "ctrl_guest_offloads", \
> > > + .value = "off", \
> > > + },{\
> > > + .driver = "e1000",\
> > > + .property = "romfile",\
> > > + .value = "pxe-e1000.rom",\
> > > + },{\
> > > + .driver = "ne2k_pci",\
> > > + .property = "romfile",\
> > > + .value = "pxe-ne2k_pci.rom",\
> > > + },{\
> > > + .driver = "pcnet",\
> > > + .property = "romfile",\
> > > + .value = "pxe-pcnet.rom",\
> > > + },{\
> > > + .driver = "rtl8139",\
> > > + .property = "romfile",\
> > > + .value = "pxe-rtl8139.rom",\
> > > + },{\
> > > + .driver = "virtio-net-pci",\
> > > + .property = "romfile",\
> > > + .value = "pxe-virtio.rom",\
> > > + },{\
> > > + .driver = "486-" TYPE_X86_CPU,\
> > > + .property = "model",\
> > > + .value = stringify(0),\
> > > + }
> > > +
> > > #endif
> > > diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
> > > index d988b80..631afe7 100644
> > > --- a/include/hw/i386/pc.h
> > > +++ b/include/hw/i386/pc.h
> > > @@ -295,52 +295,15 @@ int e820_get_num_entries(void);
> > > bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t *);
> > >
> > > #define PC_COMPAT_2_0 \
> > > + QEMU_COMPAT_2_0,\
> > > {\
> > > - .driver = "virtio-scsi-pci",\
> > > - .property = "any_layout",\
> > > - .value = "off",\
> > > - },{\
> > > .driver = "PIIX4_PM",\
> > > .property = "memory-hotplug-support",\
> > > .value = "off",\
> > > - },\
> > > - {\
> > > - .driver = "apic",\
> > > - .property = "version",\
> > > - .value = stringify(0x11),\
> > > - },\
> > > - {\
> > > - .driver = "nec-usb-xhci",\
> > > - .property = "superspeed-ports-first",\
> > > - .value = "off",\
> > > - },\
> > > - {\
> > > - .driver = "pci-serial",\
> > > - .property = "prog_if",\
> > > - .value = stringify(0),\
> > > - },\
> > > - {\
> > > - .driver = "pci-serial-2x",\
> > > - .property = "prof_if",\
> > > - .value = stringify(0),\
> > > - },\
> > > - {\
> > > - .driver = "pci-serial-4x",\
> > > - .property = "prog_if",\
> > > - .value = stringify(0),\
> > > - },\
> > > - {\
> > > - .driver = "virtio-net-pci",\
> > > - .property = "guest_announce",\
> > > - .value = "off",\
> > > }
> > >
> > > #define PC_COMPAT_1_7 \
> > > - {\
> > > - .driver = TYPE_USB_DEVICE,\
> > > - .property = "msos-desc",\
> > > - .value = "no",\
> > > - },\
> > > + QEMU_COMPAT_1_7,\
> > > {\
> > > .driver = "PIIX4_PM",\
> > > .property = "acpi-pci-hotplug-with-bridge-support",\
> > > @@ -348,19 +311,8 @@ bool e820_get_entry(int, uint32_t, uint64_t *,
> > > uint64_t *);
> > > }
> > >
> > > #define PC_COMPAT_1_6 \
> > > + QEMU_COMPAT_1_6,\
> > > {\
> > > - .driver = "e1000",\
> > > - .property = "mitigation",\
> > > - .value = "off",\
> > > - },{\
> > > - .driver = "qemu64-" TYPE_X86_CPU,\
> > > - .property = "model",\
> > > - .value = stringify(2),\
> > > - },{\
> > > - .driver = "qemu32-" TYPE_X86_CPU,\
> > > - .property = "model",\
> > > - .value = stringify(3),\
> > > - },{\
> > > .driver = "i440FX-pcihost",\
> > > .property = "short_root_bus",\
> > > .value = stringify(1),\
> > > @@ -371,39 +323,8 @@ bool e820_get_entry(int, uint32_t, uint64_t *,
> > > uint64_t *);
> > > }
> > >
> > > #define PC_COMPAT_1_5 \
> > > + QEMU_COMPAT_1_7,\
> > > {\
> > > - .driver = "Conroe-" TYPE_X86_CPU,\
> > > - .property = "model",\
> > > - .value = stringify(2),\
> > > - },{\
> > > - .driver = "Conroe-" TYPE_X86_CPU,\
> > > - .property = "level",\
> > > - .value = stringify(2),\
> > > - },{\
> > > - .driver = "Penryn-" TYPE_X86_CPU,\
> > > - .property = "model",\
> > > - .value = stringify(2),\
> > > - },{\
> > > - .driver = "Penryn-" TYPE_X86_CPU,\
> > > - .property = "level",\
> > > - .value = stringify(2),\
> > > - },{\
> > > - .driver = "Nehalem-" TYPE_X86_CPU,\
> > > - .property = "model",\
> > > - .value = stringify(2),\
> > > - },{\
> > > - .driver = "Nehalem-" TYPE_X86_CPU,\
> > > - .property = "level",\
> > > - .value = stringify(2),\
> > > - },{\
> > > - .driver = "virtio-net-pci",\
> > > - .property = "any_layout",\
> > > - .value = "off",\
> > > - },{\
> > > - .driver = TYPE_X86_CPU,\
> > > - .property = "pmu",\
> > > - .value = "on",\
> > > - },{\
> > > .driver = "i440FX-pcihost",\
> > > .property = "short_root_bus",\
> > > .value = stringify(0),\
> > > @@ -414,68 +335,7 @@ bool e820_get_entry(int, uint32_t, uint64_t *,
> > > uint64_t *);
> > > }
> > >
> > > #define PC_COMPAT_1_4 \
> > > - {\
> > > - .driver = "scsi-hd",\
> > > - .property = "discard_granularity",\
> > > - .value = stringify(0),\
> > > - },{\
> > > - .driver = "scsi-cd",\
> > > - .property = "discard_granularity",\
> > > - .value = stringify(0),\
> > > - },{\
> > > - .driver = "scsi-disk",\
> > > - .property = "discard_granularity",\
> > > - .value = stringify(0),\
> > > - },{\
> > > - .driver = "ide-hd",\
> > > - .property = "discard_granularity",\
> > > - .value = stringify(0),\
> > > - },{\
> > > - .driver = "ide-cd",\
> > > - .property = "discard_granularity",\
> > > - .value = stringify(0),\
> > > - },{\
> > > - .driver = "ide-drive",\
> > > - .property = "discard_granularity",\
> > > - .value = stringify(0),\
> > > - },{\
> > > - .driver = "virtio-blk-pci",\
> > > - .property = "discard_granularity",\
> > > - .value = stringify(0),\
> > > - },{\
> > > - .driver = "virtio-serial-pci",\
> > > - .property = "vectors",\
> > > - /* DEV_NVECTORS_UNSPECIFIED as a uint32_t string */\
> > > - .value = stringify(0xFFFFFFFF),\
> > > - },{ \
> > > - .driver = "virtio-net-pci", \
> > > - .property = "ctrl_guest_offloads", \
> > > - .value = "off", \
> > > - },{\
> > > - .driver = "e1000",\
> > > - .property = "romfile",\
> > > - .value = "pxe-e1000.rom",\
> > > - },{\
> > > - .driver = "ne2k_pci",\
> > > - .property = "romfile",\
> > > - .value = "pxe-ne2k_pci.rom",\
> > > - },{\
> > > - .driver = "pcnet",\
> > > - .property = "romfile",\
> > > - .value = "pxe-pcnet.rom",\
> > > - },{\
> > > - .driver = "rtl8139",\
> > > - .property = "romfile",\
> > > - .value = "pxe-rtl8139.rom",\
> > > - },{\
> > > - .driver = "virtio-net-pci",\
> > > - .property = "romfile",\
> > > - .value = "pxe-virtio.rom",\
> > > - },{\
> > > - .driver = "486-" TYPE_X86_CPU,\
> > > - .property = "model",\
> > > - .value = stringify(0),\
> > > - }
> > > + QEMU_COMPAT_1_4
> > >
> > > #define PC_COMMON_MACHINE_OPTIONS \
> > > .default_boot_order = "cad"
> > > --
> > > 1.9.3
>
>
