On Thu, Dec 31, 2015 at 04:31:33PM -0800, Andrew Baumann wrote:
> This is the SoC for Raspberry Pi 2.
>
> Signed-off-by: Andrew Baumann <andrew.baum...@microsoft.com>
> ---
> The use of smp_cpus is dubious here. Ideally it should be passed as a
> property from the board, but I found that simply initialising (and not
> later realizing) an ARM cpu had unintended side-effects. Is it ok to
> defer the object_initialize call to the realize method, when we know
> how many CPUs are configured?
>
> hw/arm/Makefile.objs | 2 +-
> hw/arm/bcm2836.c | 155
> +++++++++++++++++++++++++++++++++++++++++++++++
> include/hw/arm/bcm2836.h | 33 ++++++++++
> 3 files changed, 189 insertions(+), 1 deletion(-)
> create mode 100644 hw/arm/bcm2836.c
> create mode 100644 include/hw/arm/bcm2836.h
>
> diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
> index 82cc142..f55f8d2 100644
> --- a/hw/arm/Makefile.objs
> +++ b/hw/arm/Makefile.objs
> @@ -11,7 +11,7 @@ obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o
> pxa2xx_pic.o
> obj-$(CONFIG_DIGIC) += digic.o
> obj-y += omap1.o omap2.o strongarm.o
> obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o
> -obj-$(CONFIG_RASPI) += bcm2835_peripherals.o
> +obj-$(CONFIG_RASPI) += bcm2835_peripherals.o bcm2836.o
> obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
> obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-ep108.o
> obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o
> diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
> new file mode 100644
> index 0000000..bec7667
> --- /dev/null
> +++ b/hw/arm/bcm2836.c
> @@ -0,0 +1,155 @@
> +/*
> + * Raspberry Pi emulation (c) 2012 Gregory Estrade
> + * Upstreaming code cleanup [including bcm2835_*] (c) 2013 Jan Petrous
> + *
> + * Rasperry Pi 2 emulation and refactoring Copyright (c) 2015, Microsoft
> + * Written by Andrew Baumann
> + *
> + * This code is licensed under the GNU GPLv2 and later.
> + */
> +
> +#include "hw/arm/bcm2836.h"
> +#include "hw/arm/raspi_platform.h"
> +#include "hw/sysbus.h"
> +#include "sysemu/sysemu.h" /* for smp_cpus */
> +#include "exec/address-spaces.h"
> +
> +/* Peripheral base address seen by the CPU */
> +#define BCM2836_PERI_BASE 0x3F000000
> +
> +/* "QA7" (Pi2) interrupt controller and mailboxes etc. */
> +#define BCM2836_CONTROL_BASE 0x40000000
> +
> +static void bcm2836_init(Object *obj)
> +{
> + BCM2836State *s = BCM2836(obj);
> + int n;
> +
> + /* TODO: probably shouldn't be using smp_cpus here */
I agree. I have started ignoring smp_cpus completely for new ARM SoCs,
as if you change the number of CPUs for a SoC, it is not that SoC
anymore. The virt platform is suitable for CPU scalability, whereas
with ARM SoCs, cpu # variation is invalid.
> + assert(smp_cpus <= BCM2836_NCPUS);
> + for (n = 0; n < smp_cpus; n++) {
So can we just use BCM2836_NCPUS here as the loop bound? Any
conditionals out there check the existance of CPUs can be removed or
promoted to assert() as a BCM2836 must always have 4 CPUs.
> + object_initialize(&s->cpus[n], sizeof(s->cpus[n]),
> + "cortex-a15-" TYPE_ARM_CPU);
> + object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]),
> + &error_abort);
> + }
> +
> + object_initialize(&s->ic, sizeof(s->ic), TYPE_BCM2836_CONTROL);
> + object_property_add_child(obj, "ic", OBJECT(&s->ic), NULL);
Why "ic"? The TYPE_ and the field name are inconsistent. Is it specifically
and interrupt controller or is it generic controller? (My scan of the doc
made me think its a home-grown mpcore). Maybe the field name and string name
should be "cntl"?
> + qdev_set_parent_bus(DEVICE(&s->ic), sysbus_get_default());
> +
> + object_initialize(&s->peripherals, sizeof(s->peripherals),
> + TYPE_BCM2835_PERIPHERALS);
> + object_property_add_child(obj, "peripherals", OBJECT(&s->peripherals),
> + &error_abort);
> + qdev_set_parent_bus(DEVICE(&s->peripherals), sysbus_get_default());
> +}
> +
> +static void bcm2836_realize(DeviceState *dev, Error **errp)
> +{
> + BCM2836State *s = BCM2836(dev);
> + Object *obj;
> + Error *err = NULL;
> + int n;
> +
> + /* common peripherals from bcm2835 */
Blank line here (otherwise the comment looks like it only applies to up to
the next line-break whereas this goes further).
> + obj = object_property_get_link(OBJECT(dev), "ram", &err);
> + if (obj == NULL) {
> + error_setg(errp, "%s: required ram link not found: %s",
> + __func__, error_get_pretty(err));
> + return;
> + }
> +
> + object_property_add_const_link(OBJECT(&s->peripherals), "ram", obj,
> &err);
> + if (err) {
> + error_propagate(errp, err);
> + return;
> + }
> +
> + object_property_set_bool(OBJECT(&s->peripherals), true, "realized",
> &err);
> + if (err) {
> + error_propagate(errp, err);
> + return;
> + }
> +
> + sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals), 0,
> + BCM2836_PERI_BASE, 1);
> +
> + /* bcm2836 interrupt controller (and mailboxes, etc.) */
> + object_property_set_bool(OBJECT(&s->ic), true, "realized", &err);
> + if (err) {
> + error_propagate(errp, err);
> + return;
> + }
> +
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ic), 0, BCM2836_CONTROL_BASE);
> +
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 0,
> + qdev_get_gpio_in_named(DEVICE(&s->ic), "gpu_irq", 0));
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 1,
> + qdev_get_gpio_in_named(DEVICE(&s->ic), "gpu_fiq", 0));
> +
> + /* TODO: probably shouldn't be using smp_cpus here */
> + assert(smp_cpus <= BCM2836_NCPUS);
> + for (n = 0; n < smp_cpus; n++) {
> + /* Mirror bcm2836, which has clusterid set to 0xf */
> + s->cpus[n].mp_affinity = 0xF00 | n;
> +
This is probably ok for the moment, but the correct solution is to propertyify
mp_affinity for ARM CPUs and then set via prop as for the reset-cbar below.
There is some stuff in target-arm that sets the higher order affinities based
on CPU numbers on a fixed wrap-around scheme, but that needs to go away, and
be push up to the virt machine. Then virt uses the same property setter to
implement that wrap-around while SoC can get their affinity right.
The Highbank machine has the same problem, and SMP linux boot is blocked by
the same.
> + /* set periphbase/CBAR value for CPU-local registers */
> + object_property_set_int(OBJECT(&s->cpus[n]),
> + BCM2836_PERI_BASE + MCORE_OFFSET,
> + "reset-cbar", &err);
> + if (err) {
> + error_report_err(err);
> + exit(1);
You should just propagate as-above. Original report-and-exit is probably from
machine-model code where there is no-one to propagate too.
> + }
> +
> + object_property_set_bool(OBJECT(&s->cpus[n]), true, "realized",
> &err);
> + if (err) {
> + error_report_err(err);
propagate.
Regards,
Peter
> + exit(1);
> + }
> +
> + /* Connect irq/fiq outputs from the interrupt controller. */
> + qdev_connect_gpio_out_named(DEVICE(&s->ic), "irq", n,
> + qdev_get_gpio_in(DEVICE(&s->cpus[n]),
> + ARM_CPU_IRQ));
> + qdev_connect_gpio_out_named(DEVICE(&s->ic), "fiq", n,
> + qdev_get_gpio_in(DEVICE(&s->cpus[n]),
> + ARM_CPU_FIQ));
> +
> + /* Connect timers from the CPU to the interrupt controller */
> + s->cpus[n].gt_timer_outputs[GTIMER_PHYS]
> + = qdev_get_gpio_in_named(DEVICE(&s->ic), "cntpsirq", 0);
> + s->cpus[n].gt_timer_outputs[GTIMER_VIRT]
> + = qdev_get_gpio_in_named(DEVICE(&s->ic), "cntvirq", 0);
> + }
> +}
> +
> +static void bcm2836_class_init(ObjectClass *oc, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(oc);
> +
> + dc->realize = bcm2836_realize;
> +
> + /*
> + * Reason: creates an ARM CPU, thus use after free(), see
> + * arm_cpu_class_init()
> + */
> + dc->cannot_destroy_with_object_finalize_yet = true;
> +}
> +
> +static const TypeInfo bcm2836_type_info = {
> + .name = TYPE_BCM2836,
> + .parent = TYPE_SYS_BUS_DEVICE,
> + .instance_size = sizeof(BCM2836State),
> + .instance_init = bcm2836_init,
> + .class_init = bcm2836_class_init,
> +};
> +
> +static void bcm2836_register_types(void)
> +{
> + type_register_static(&bcm2836_type_info);
> +}
> +
> +type_init(bcm2836_register_types)
> diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h
> new file mode 100644
> index 0000000..a78e919
> --- /dev/null
> +++ b/include/hw/arm/bcm2836.h
> @@ -0,0 +1,33 @@
> +/*
> + * Raspberry Pi emulation (c) 2012 Gregory Estrade
> + * Upstreaming code cleanup [including bcm2835_*] (c) 2013 Jan Petrous
> + *
> + * Rasperry Pi 2 emulation and refactoring Copyright (c) 2015, Microsoft
> + * Written by Andrew Baumann
> + *
> + * This code is licensed under the GNU GPLv2 and later.
> + */
> +
> +#ifndef BCM2836_H
> +#define BCM2836_H
> +
> +#include "hw/arm/arm.h"
> +#include "hw/arm/bcm2835_peripherals.h"
> +#include "hw/intc/bcm2836_control.h"
> +
> +#define TYPE_BCM2836 "bcm2836"
> +#define BCM2836(obj) OBJECT_CHECK(BCM2836State, (obj), TYPE_BCM2836)
> +
> +#define BCM2836_NCPUS 4
> +
> +typedef struct BCM2836State {
> + /*< private >*/
> + DeviceState parent_obj;
> + /*< public >*/
> +
> + ARMCPU cpus[BCM2836_NCPUS];
> + BCM2836ControlState ic;
> + BCM2835PeripheralState peripherals;
> +} BCM2836State;
> +
> +#endif /* BCM2836_H */
> --
> 2.5.3
>
