I also need to make some changes to the actual SPI device to
improve the functionality, but for the time being this works.
V7
- Use g_strdup_printf() for the bus names
V6 (From Peter C):
- Allow use of QOM paths for referencing qbusses
- Use Alias to implement bus pinout.
V5:
- Fix a typo
- Use a qdev API to rename the SPI bus
V4:
- Rebase
- Rename the SPI busses so that they can all be accessed from the
SoC
- Only create one SPI flash device
V3:
- Don't reach into the SoC to get the SPI Bus
V2:
- Connect the SPI flash in the board code
- Update git patches to properly indicate rename
- Add sst25wf080 as a SPI flash
Alistair Francis (5):
m25p80.c: Add sst25wf080 SPI flash device
ssi: Move ssi.h into a separate directory
xilinx_spips: Separate the state struct into a header
xlnx-zynqmp: Connect the SPI devices
xlnx-ep108: Connect the SPI Flash
Peter Crosthwaite (1):
qdev: get_child_bus(): Use QOM lookup if available
hw/arm/pxa2xx.c | 2 +-
hw/arm/spitz.c | 2 +-
hw/arm/stellaris.c | 2 +-
hw/arm/strongarm.c | 2 +-
hw/arm/tosa.c | 2 +-
hw/arm/xilinx_zynq.c | 2 +-
hw/arm/xlnx-ep108.c | 15 ++++++++
hw/arm/xlnx-zynqmp.c | 30 ++++++++++++++++
hw/arm/z2.c | 2 +-
hw/block/m25p80.c | 3 +-
hw/core/qdev.c | 6 ++++
hw/display/ads7846.c | 2 +-
hw/display/ssd0323.c | 2 +-
hw/microblaze/petalogix_ml605_mmu.c | 2 +-
hw/misc/max111x.c | 2 +-
hw/sd/ssi-sd.c | 2 +-
hw/ssi/pl022.c | 2 +-
hw/ssi/ssi.c | 2 +-
hw/ssi/xilinx_spi.c | 2 +-
hw/ssi/xilinx_spips.c | 48 +++----------------------
include/hw/arm/xlnx-zynqmp.h | 3 ++
include/hw/{ => ssi}/ssi.h | 10 +++---
include/hw/ssi/xilinx_spips.h | 72 +++++++++++++++++++++++++++++++++++++
23 files changed, 154 insertions(+), 63 deletions(-)
rename include/hw/{ => ssi}/ssi.h (96%)
create mode 100644 include/hw/ssi/xilinx_spips.h
--
2.5.0
