Hi Paolo,
I was looking for documentation on the limits of #controllers,
#channels, #targets, #LUNs, #disks in virtio-scsi, and couldn't find
any, so I thought I would create that documentation instead. I wonder
if you could check that the following is correct information. Also -
at the bottom of the email - a puzzling problem or bug.
At the libvirt level, we refer to virtio-scsi disks using:
<devices>
<controller type="scsi" index="0" model="virtio-scsi"/>
...
<disk device="disk" type="file">
<source file="disk.img"/>
<target dev="sda" bus="scsi"/>
<driver name="qemu" type="raw"/>
<address type="drive" controller="0" bus="0" target="0" unit="0"/>
</disk>
On the qemu command line, the controller becomes:
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x2
(For Q35, it would specify a PCIe bus and the address would also be a
bit different).
On the qemu command line, the disk becomes:
-drive file=disk.img,format=raw,if=none,id=drive-scsi0-0-0-0
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
In libvirt <address ... controller="0"> refers back to the
<controller index="0"/> element. You can add more than one
virtio-scsi controller, but each one takes a PCI slot, and the number
of PCI slots can be limited (or on Q35, there are no effective limits
but there are other architectural constraints).
In libvirt, <address ... bus="0"> refers to the virtio-scsi "channel".
The current virtio-scsi driver in qemu has a hard limit of 1 channel,
so you can only use bus="0" (or channel=0).
Open question: Will this limit ever be increased?
In libvirt, <address ... target="0"> refers to the virtio-scsi
"scsi-id" (internally in the driver called just ".id"). You can use
any target from 0 to 255 inclusive.
In libvirt, <address ... unit="0"> refers to the virtio-scsi "unit" ie
the SCSI LUN. You can use any LUN from 0 to 16383 inclusive.
Open question: What does the bus=scsi0.0 parameter mean?
The maximum number of drives on a single controller is therefore
256 * 16384 = 4194304.
However there are other limits to consider:
(1) qemu is limited by the number of files it can open (ulimit -n /
RLIMIT_NOFILE). On Fedora, this is 1024 (soft) or 4096 (hard),
although of course it may be increased.
(2) libvirt has trouble with > about 8000 drives
(https://bugzilla.redhat.com/1443066).
(3) The Linux kernel used to be limited to three letter drive names
(ie. up to /dev/sdzzz, or 18278 drives), but in modern kernels
this is no longer an issue.
(4) The Linux kernel is quite slow at enumerating drives. I couldn't
get past 4000 drives without hitting SCSI layer timeouts.
Not tested yet: Does hotplugging work on individual LUNs?
----------------------------------------------------------------------
Currently libguestfs puts each disk on a separate target (target=i
unit=0), and therefore has an effective limit of 255 disks (256 - 1
because the appliance uses a disk).
When I changed libguestfs to use LUNs instead of targets (target=0
unit=i), I got a peculiar bug. It looks like there is some kind of
race when enumerating the device, where /sys is populated before the
device is actually available. See the below boot log, and compare it
to the init code:
https://github.com/libguestfs/supermin/blob/master/init/init.c#L176
* fp = fopen ("/sys/block/sdab/dev", "r") succeeds at line 181
* we read major:minor from fp at line 230
* we mknod ("/dev/root",...) at line 245
* we mount ("/dev/root", "/root", "ext2"...) at line 262, which fails with
EINVAL
* shortly after that, kernel messages indicate that sdab has been
attached.
Rich.
2017-04-18 14:30:28.019+0000: starting up libvirt version: 3.2.0, package:
1.fc27 (Fedora Project, 2017-04-03-13:37:30,
buildvm-26.phx2.fedoraproject.org), qemu version:
2.8.93(qemu-2.9.0-0.2.rc3.fc27), hostname: trick.home.annexia.org
LC_ALL=C
LD_LIBRARY_PATH=/home/rjones/d/libguestfs/ruby/ext/guestfs:/home/rjones/d/libguestfs/lib/.libs:/home/rjones/d/libguestfs/java/.libs:/home/rjones/d/libguestfs/gobject/.libs
PATH=/home/rjones/d/libguestfs/v2v:/home/rjones/d/libguestfs/tools:/home/rjones/d/libguestfs/test-tool:/home/rjones/d/libguestfs/sysprep:/home/rjones/d/libguestfs/sparsify:/home/rjones/d/libguestfs/resize:/home/rjones/d/libguestfs/rescue:/home/rjones/d/libguestfs/p2v:/home/rjones/d/libguestfs/make-fs:/home/rjones/d/libguestfs/inspector:/home/rjones/d/libguestfs/get-kernel:/home/rjones/d/libguestfs/fuse:/home/rjones/d/libguestfs/format:/home/rjones/d/libguestfs/fish:/home/rjones/d/libguestfs/erlang:/home/rjones/d/libguestfs/edit:/home/rjones/d/libguestfs/diff:/home/rjones/d/libguestfs/dib:/home/rjones/d/libguestfs/df:/home/rjones/d/libguestfs/customize:/home/rjones/d/libguestfs/cat:/home/rjones/d/libguestfs/builder:/home/rjones/d/libguestfs/align:/usr/libexec/python2-sphinx:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/rjones/.local/bin:/home/rjones/bin
HOME=/home/rjones USER=rjones LOGNAME=rjones QEMU_AUDIO_DRV=none
TMPDIR=/home/rjones/d/libguestfs/tmp /usr/bin/qemu-kvm -name
guest=guestfs-o53fc0or1muu2f30,debug-threads=on -S -object
secret,id=masterKey0,format=raw,file=/home/rjones/.config/libvirt/qemu/lib/domain-1-guestfs-o53fc0or1muu/master-key.aes
-machine pc-i440fx-2.9,accel=kvm,usb=off,dump-guest-core=off -cpu host -m 500
-realtime mlock=off -smp 1,sockets=1,cores=1,threads=1 -uuid
ca87a437-9562-4ca0-bd11-607342286ba1 -display none -no-user-config -nodefaults
-device sga -chardev
socket,id=charmonitor,path=/home/rjones/.config/libvirt/qemu/lib/domain-1-guestfs-o53fc0or1muu/monitor.sock,server,nowait
-mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc,driftfix=slew
-global kvm-pit.lost_tick_policy=delay -no-hpet -no-reboot -no-acpi -boot
strict=on -kernel
/home/rjones/d/libguestfs/tmp/.guestfs-1000/appliance.d/kernel -initrd
/home/rjones/d/libguestfs/tmp/.guestfs-1000/appliance.d/initrd -append 'panic=1
console=ttyS0 edd=off udevtimeout=6000 udev.event-timeout=6000 no_timer_check
printk.time=1 cgroup_disable=memory usbcore.nousb cryptomgr.notests
tsc=reliable 8250.nr_uarts=1 root=/dev/sdab selinux=0 guestfs_verbose=1
TERM=xterm-256color' -device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x2
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x3 -drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.1,format=raw,if=none,id=drive-scsi0-0-0-0,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.2,format=raw,if=none,id=drive-scsi0-0-0-1,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=1,drive=drive-scsi0-0-0-1,id=scsi0-0-0-1
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.3,format=raw,if=none,id=drive-scsi0-0-0-2,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=2,drive=drive-scsi0-0-0-2,id=scsi0-0-0-2
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.4,format=raw,if=none,id=drive-scsi0-0-0-3,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=3,drive=drive-scsi0-0-0-3,id=scsi0-0-0-3
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.5,format=raw,if=none,id=drive-scsi0-0-0-4,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=4,drive=drive-scsi0-0-0-4,id=scsi0-0-0-4
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.6,format=raw,if=none,id=drive-scsi0-0-0-5,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=5,drive=drive-scsi0-0-0-5,id=scsi0-0-0-5
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.7,format=raw,if=none,id=drive-scsi0-0-0-6,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=6,drive=drive-scsi0-0-0-6,id=scsi0-0-0-6
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.8,format=raw,if=none,id=drive-scsi0-0-0-7,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=7,drive=drive-scsi0-0-0-7,id=scsi0-0-0-7
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.9,format=raw,if=none,id=drive-scsi0-0-0-8,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=8,drive=drive-scsi0-0-0-8,id=scsi0-0-0-8
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.10,format=raw,if=none,id=drive-scsi0-0-0-9,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=9,drive=drive-scsi0-0-0-9,id=scsi0-0-0-9
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.11,format=raw,if=none,id=drive-scsi0-0-0-10,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=10,drive=drive-scsi0-0-0-10,id=scsi0-0-0-10
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.12,format=raw,if=none,id=drive-scsi0-0-0-11,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=11,drive=drive-scsi0-0-0-11,id=scsi0-0-0-11
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.13,format=raw,if=none,id=drive-scsi0-0-0-12,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=12,drive=drive-scsi0-0-0-12,id=scsi0-0-0-12
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.14,format=raw,if=none,id=drive-scsi0-0-0-13,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=13,drive=drive-scsi0-0-0-13,id=scsi0-0-0-13
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.15,format=raw,if=none,id=drive-scsi0-0-0-14,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=14,drive=drive-scsi0-0-0-14,id=scsi0-0-0-14
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.16,format=raw,if=none,id=drive-scsi0-0-0-15,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=15,drive=drive-scsi0-0-0-15,id=scsi0-0-0-15
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.17,format=raw,if=none,id=drive-scsi0-0-0-16,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=16,drive=drive-scsi0-0-0-16,id=scsi0-0-0-16
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.18,format=raw,if=none,id=drive-scsi0-0-0-17,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=17,drive=drive-scsi0-0-0-17,id=scsi0-0-0-17
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.19,format=raw,if=none,id=drive-scsi0-0-0-18,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=18,drive=drive-scsi0-0-0-18,id=scsi0-0-0-18
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.20,format=raw,if=none,id=drive-scsi0-0-0-19,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=19,drive=drive-scsi0-0-0-19,id=scsi0-0-0-19
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.21,format=raw,if=none,id=drive-scsi0-0-0-20,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=20,drive=drive-scsi0-0-0-20,id=scsi0-0-0-20
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.22,format=raw,if=none,id=drive-scsi0-0-0-21,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=21,drive=drive-scsi0-0-0-21,id=scsi0-0-0-21
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.23,format=raw,if=none,id=drive-scsi0-0-0-22,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=22,drive=drive-scsi0-0-0-22,id=scsi0-0-0-22
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.24,format=raw,if=none,id=drive-scsi0-0-0-23,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=23,drive=drive-scsi0-0-0-23,id=scsi0-0-0-23
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.25,format=raw,if=none,id=drive-scsi0-0-0-24,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=24,drive=drive-scsi0-0-0-24,id=scsi0-0-0-24
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.26,format=raw,if=none,id=drive-scsi0-0-0-25,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=25,drive=drive-scsi0-0-0-25,id=scsi0-0-0-25
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.27,format=raw,if=none,id=drive-scsi0-0-0-26,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=26,drive=drive-scsi0-0-0-26,id=scsi0-0-0-26
-drive
file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/overlay28,format=qcow2,if=none,id=drive-scsi0-0-0-27,cache=unsafe
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=27,drive=drive-scsi0-0-0-27,id=scsi0-0-0-27
-chardev
socket,id=charserial0,path=/run/user/1000/libguestfsE9o2dm/console.sock -device
isa-serial,chardev=charserial0,id=serial0 -chardev
socket,id=charchannel0,path=/run/user/1000/libguestfsE9o2dm/guestfsd.sock
-device
virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.libguestfs.channel.0
-object rng-random,id=objrng0,filename=/dev/urandom -device
virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x4 -msg timestamp=on
2017-04-18 14:30:28.019+0000: Domain id=1 is tainted: custom-argv
2017-04-18 14:30:28.019+0000: Domain id=1 is tainted: host-cpu
2017-04-18 14:30:31.860+0000: shutting down, reason=shutdown
Google, Inc.
Serial Graphics Adapter 02/12/17
SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (mockbuild@) Sun Feb 12
00:43:05 UTC 2017
Term: 80x24
4 0
\x1b[2J
SeaBIOS (version 1.10.2-1.fc26)
Machine UUID ca87a437-9562-4ca0-bd11-607342286ba1
Booting from ROM...
\x1b[2J[ 0.000000] Linux version 4.11.0-0.rc4.git1.1.fc27.x86_64
(mockbu...@bkernel02.phx2.fedoraproject.org) (gcc version 7.0.1 20170327 (Red
Hat 7.0.1-0.13) (GCC) ) #1 SMP Tue Mar 28 15:20:45 UTC 2017
[ 0.000000] Command line: panic=1 console=ttyS0 edd=off udevtimeout=6000
udev.event-timeout=6000 no_timer_check printk.time=1 cgroup_disable=memory
usbcore.nousb cryptomgr.notests tsc=reliable 8250.nr_uarts=1 root=/dev/sdab
selinux=0 guestfs_verbose=1 TERM=xterm-256color
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes,
using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f3fdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f3fe000-0x000000001f3fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26
04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: last_pfn = 0x1f3fe max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000f6c10-0x000f6c1f] mapped at
[ffffa059000f6c10]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x1f366000-0x1f3effff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found
(20170119/tbxfroot-244)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001f3fdfff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1f33b000-0x1f365fff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1f2bb001, primary cpu clock
[ 0.000000] kvm-clock: using sched offset of 371325493 cycles
[ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles:
0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000001f3fdfff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001f3fdfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001f3fdfff]
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: BOCHSCPU
[ 0.000000] MPTABLE: Product ID: 0.1
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] Processors: 1
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x1f400000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:1 nr_cpu_ids:1
nr_node_ids:1
[ 0.000000] percpu: Embedded 485 pages/cpu @ffffa0591f000000 s1948504 r8192
d29864 u2097152
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1f00db40
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 125879
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: panic=1 console=ttyS0 edd=off
udevtimeout=6000 udev.event-timeout=6000 no_timer_check printk.time=1
cgroup_disable=memory usbcore.nousb cryptomgr.notests tsc=reliable
8250.nr_uarts=1 root=/dev/sdab selinux=0 guestfs_verbose=1 TERM=xterm-256color
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Memory: 461856K/511600K available (9745K kernel code, 2014K
rwdata, 3808K rodata, 4652K init, 17160K bss, 49744K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.001000] Running RCU self tests
[ 0.001000] Hierarchical RCU implementation.
[ 0.001000] \tRCU lockdep checking is enabled.
[ 0.001000] \tBuild-time adjustment of leaf fanout to 64.
[ 0.001000] \tRCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=1.
[ 0.001000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[ 0.001000] NR_IRQS:524544 nr_irqs:256 16
[ 0.001000] \tOffload RCU callbacks from all CPUs
[ 0.001000] \tOffload RCU callbacks from CPUs: 0.
[ 0.001000] Console: colour *CGA 80x25
[ 0.001000] console [ttyS0] enabled
[ 0.001000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
Ingo Molnar
[ 0.001000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.001000] ... MAX_LOCK_DEPTH: 48
[ 0.001000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.001000] ... CLASSHASH_SIZE: 4096
[ 0.001000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.001000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.001000] ... CHAINHASH_SIZE: 32768
[ 0.001000] memory used by lock dependency info: 8671 kB
[ 0.001000] per task-struct memory footprint: 2688 bytes
[ 0.001000] kmemleak: Kernel memory leak detector disabled
[ 0.001018] tsc: Detected 1699.998 MHz processor
[ 0.003027] Calibrating delay loop (skipped) preset value.. 3399.99 BogoMIPS
(lpj=1699998)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.006165] Security Framework initialized
[ 0.008011] Yama: becoming mindful.
[ 0.009025] SELinux: Disabled at boot.
[ 0.011214] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.013193] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.015082] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.016015] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.019517] Disabling memory control group subsystem
[ 0.021128] CPU: Physical Processor ID: 0
[ 0.023017] mce: CPU supports 10 MCE banks
[ 0.025120] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.026010] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.040016] Freeing SMP alternatives memory: 32K
[ 0.042863] ftrace: allocating 32197 entries in 126 pages
[ 0.055311] smpboot: Max logical packages: 1
[ 0.057531] x2apic enabled
[ 0.058011] Switched APIC routing to physical x2apic.
[ 0.062806] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063000] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2609 v4 @ 1.70GHz
(family: 0x6, model: 0x4f, stepping: 0x1)
[ 0.063254] Performance Events: Broadwell events, Intel PMU driver.
[ 0.064021] ... version: 2
[ 0.065010] ... bit width: 48
[ 0.066009] ... generic registers: 8
[ 0.067021] ... value mask: 0000ffffffffffff
[ 0.068010] ... max period: 000000007fffffff
[ 0.069010] ... fixed-purpose events: 3
[ 0.070010] ... event mask: 00000007000000ff
[ 0.072669] smp: Bringing up secondary CPUs ...
[ 0.073038] smp: Brought up 1 node, 1 CPU
[ 0.074011] smpboot: Total of 1 processors activated (3399.99 BogoMIPS)
[ 0.075808] sched_clock: Marking stable (75000000, 0)->(396801627,
-321801627)
[ 0.079129] devtmpfs: initialized
[ 0.080701] x86/mm: Memory block size: 128MB
[ 0.085293] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1911260446275000 ns
[ 0.089064] futex hash table entries: 256 (order: 3, 32768 bytes)
[ 0.091677] pinctrl core: initialized pinctrl subsystem
[ 0.094067] RTC time: 14:30:28, date: 04/18/17
[ 0.096314] NET: Registered protocol family 16
[ 0.098807] cpuidle: using governor menu
[ 0.100932] PCI: Using configuration type 1 for base access
[ 0.110790] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.113333] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.116674] ACPI: Interpreter disabled.
[ 0.118503] vgaarb: loaded
[ 0.119907] SCSI subsystem initialized
[ 0.121620] usbcore: USB support disabled
[ 0.124193] PCI: Probing PCI hardware
[ 0.125796] PCI host bridge to bus 0000:00
[ 0.127419] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.129884] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
[ 0.132671] pci_bus 0000:00: No busn resource found for root bus, will use
[bus 00-ff]
[ 0.145046] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.147908] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.151764] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.154494] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.206482] pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7000]
[ 0.211141] NetLabel: Initializing
[ 0.212580] NetLabel: domain hash size = 128
[ 0.214330] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.216836] NetLabel: unlabeled traffic allowed by default
[ 0.219328] clocksource: Switched to clocksource kvm-clock
[ 0.288806] VFS: Disk quotas dquot_6.6.0
[ 0.290516] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.293531] pnp: PnP ACPI: disabled
[ 0.301297] NET: Registered protocol family 2
[ 0.303701] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.306910] TCP bind hash table entries: 4096 (order: 6, 327680 bytes)
[ 0.309906] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.312599] UDP hash table entries: 256 (order: 3, 49152 bytes)
[ 0.315142] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes)
[ 0.318143] NET: Registered protocol family 1
[ 0.319891] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.322254] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.324597] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.327530] Unpacking initramfs...
[ 0.332133] Freeing initrd memory: 552K
[ 0.361347] DMA-API: preallocated 65536 debug entries
[ 0.365537] DMA-API: debugging enabled by kernel config
[ 0.367840] platform rtc_cmos: registered platform RTC device (no PNP device
found)
[ 0.371369] Scanning for low memory corruption every 60 seconds
[ 0.374041] alg: self-tests disabled
[ 0.376207] audit: initializing netlink subsys (disabled)
[ 0.378523] cryptomgr_test (31) used greatest stack depth: 14640 bytes left
[ 0.382109] Initialise system trusted keyrings
[ 0.384258] workingset: timestamp_bits=36 max_order=17 bucket_order=0
[ 0.393146] zbud: loaded
[ 0.400637] NET: Registered protocol family 38
[ 0.402612] Key type asymmetric registered
[ 0.404396] Asymmetric key parser 'x509' registered
[ 0.406442] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
249)
[ 0.409491] io scheduler noop registered
[ 0.411402] io scheduler deadline registered
[ 0.413212] io scheduler cfq registered (default)
[ 0.415091] io scheduler mq-deadline registered
[ 0.419179] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.423584] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.456161] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is
a 16550A
[ 0.460297] Non-volatile memory driver v1.3
[ 0.462130] Linux agpgart interface v0.103
[ 0.467678] scsi host0: ata_piix
[ 0.469434] scsi host1: ata_piix
[ 0.470911] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[ 0.473629] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[ 0.476591] libphy: Fixed MDIO Bus: probed
[ 0.478471] usbserial: usb_serial_init - usb_register failed
[ 0.480806] usbserial: usb_serial_init - returning with error -19
[ 0.484518] i8042: PNP: No PS/2 controller found.
[ 0.486389] i8042: Probing ports directly.
[ 0.489922] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.491958] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.494442] mousedev: PS/2 mouse device common for all mice
[ 0.497646] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 0.501898] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.502142] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 0.502369] device-mapper: uevent: version 1.0.3
[ 0.507619] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised:
dm-de...@redhat.com
[ 0.508012] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.508244] drop_monitor: Initializing network drop monitor service
[ 0.508480] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.508555] Initializing XFRM netlink socket
[ 0.509052] NET: Registered protocol family 10
[ 0.515512] kworker/u2:2 (84) used greatest stack depth: 13984 bytes left
[ 0.526228] Segment Routing with IPv6
[ 0.526280] mip6: Mobile IPv6
[ 0.526299] NET: Registered protocol family 17
[ 0.526758] AVX2 version of gcm_enc/dec engaged.
[ 0.526760] AES CTR mode by8 optimization enabled
[ 0.543050] input: VirtualPS/2 VMware VMMouse as
/devices/platform/i8042/serio1/input/input3
[ 0.547081] registered taskstats version 1
[ 0.547110] Loading compiled-in X.509 certificates
[ 0.552180] input: VirtualPS/2 VMware VMMouse as
/devices/platform/i8042/serio1/input/input2
[ 0.556764] Loaded X.509 cert 'Fedora kernel signing key:
036bba79a715c1478c894d1c952934f04ad530a5'
[ 0.556932] zswap: loaded using pool lzo/zbud
[ 0.577721] Key type big_key registered
[ 0.579809] Key type encrypted registered
[ 0.583175] Magic number: 13:302:536
[ 0.584997] rtc_cmos rtc_cmos: setting system clock to 2017-04-18 14:30:29
UTC (1492525829)
[ 0.641961] Freeing unused kernel memory: 4652K
[ 0.643872] Write protecting the kernel read-only data: 14336k
[ 0.647151] Freeing unused kernel memory: 480K
[ 0.649973] Freeing unused kernel memory: 288K
[ 0.654106] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.656601] rodata_test: all tests were successful
supermin: mounting /proc
supermin: ext2 mini initrd starting up: 5.1.17 dietlibc
supermin: cmdline: panic=1 console=ttyS0 edd=off udevtimeout=6000
udev.event-timeout=6000 no_timer_check printk.time=1 cgroup_disable=memory
usbcore.nousb cryptomgr.notests tsc=reliable 8250.nr_uarts=1 root=/dev/sdab
selinux=0 guestfs_verbose=1 TERM=xterm-256color
supermin: uptime: 0.60 0.08
supermin: mounting /sys
supermin: internal insmod crc32-pclmul.ko
supermin: internal insmod crc32c-intel.ko
supermin: internal insmod crct10dif-pclmul.ko
supermin: internal insmod crc32_generic.ko
supermin: internal insmod nfit.ko
insmod: init_module: nfit.ko: No such device
supermin: internal insmod virtio.ko
supermin: internal insmod virtio_ring.ko
supermin: internal insmod virtio_blk.ko
supermin: internal insmod virtio-rng.ko
supermin: internal insmod virtio_console.ko
supermin: internal insmod crypto_engine.ko
supermin: internal insmod virtio_crypto.ko[ 0.716226] random: fast init done
supermin: internal insmod virtio_net.ko
supermin: internal insmod nd_btt.ko
supermin: internal insmod nd_pmem.ko
supermin: internal insmod virtio_scsi.ko
supermin: internal insmod virtio_balloon.ko
supermin: internal insmod virtio_input.ko
supermin: internal insmod virtio_mmio.ko
supermin: internal insmod virtio_pci.ko
[ 0.750232] virtio-pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 10
[ 0.757888] scsi host2: Virtio SCSI HBA
[ 0.760908] virtio-pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 11
[ 0.765966] scsi 2:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.777079] scsi 2:0:0:27: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.797056] scsi 2:0:0:26: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.801051] virtio-pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 11
[ 0.808212] scsi 2:0:0:25: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.811926] random: crng init done
[ 0.814597] scsi 2:0:0:24: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.819568] scsi 2:0:0:23: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.823898] scsi 2:0:0:22: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.828180] scsi 2:0:0:21: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.832427] scsi 2:0:0:20: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.836679] scsi 2:0:0:19: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.840946] scsi 2:0:0:18: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.845154] scsi 2:0:0:17: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.849404] scsi 2:0:0:16: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.853644] scsi 2:0:0:15: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.857927] scsi 2:0:0:14: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.862196] scsi 2:0:0:13: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.866432] scsi 2:0:0:12: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.870682] scsi 2:0:0:11: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.874952] scsi 2:0:0:10: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.879142] scsi 2:0:0:9: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.883343] scsi 2:0:0:8: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.887531] scsi 2:0:0:7: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.891778] scsi 2:0:0:6: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.895953] scsi 2:0:0:5: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.900142] scsi 2:0:0:4: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.904411] scsi 2:0:0:3: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.908635] scsi 2:0:0:2: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.912806] scsi 2:0:0:1: Direct-Access QEMU QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 1.124757] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.127512] sd 2:0:0:0: [sda] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.130779] sd 2:0:0:0: [sda] Write Protect is off
[ 1.133100] sd 2:0:0:27: Attached scsi generic sg1 type 0
[ 1.135704] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.139705] sd 2:0:0:27: [sdb] 8388608 512-byte logical blocks: (4.29
GB/4.00 GiB)
[ 1.142948] sd 2:0:0:27: [sdb] Write Protect is off
[ 1.144929] sd 2:0:0:26: Attached scsi generic sg2 type 0
[ 1.147482] sd 2:0:0:27: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.151944] sd 2:0:0:26: [sdc] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.155113] sd 2:0:0:26: [sdc] Write Protect is off
[ 1.157290] sd 2:0:0:25: Attached scsi generic sg3 type 0
[ 1.160070] sd 2:0:0:26: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.164503] sd 2:0:0:25: [sdd] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.167645] sd 2:0:0:25: [sdd] Write Protect is off
[ 1.169807] sd 2:0:0:24: Attached scsi generic sg4 type 0
[ 1.173149] sd 2:0:0:25: [sdd] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.177990] sd 2:0:0:24: [sde] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.181191] sd 2:0:0:24: [sde] Write Protect is off
[ 1.184067] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.186874] sd 2:0:0:23: Attached scsi generic sg5 type 0
[ 1.189651] sd 2:0:0:24: [sde] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.193690] sd 2:0:0:23: [sdf] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.196837] sd 2:0:0:23: [sdf] Write Protect is off
[ 1.199386] sd 2:0:0:27: [sdb] Attached SCSI disk
[ 1.202784] sd 2:0:0:22: [sdg] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.205824] sd 2:0:0:22: Attached scsi generic sg6 type 0
[ 1.208463] sd 2:0:0:22: [sdg] Write Protect is off
[ 1.210808] sd 2:0:0:23: [sdf] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.214644] sd 2:0:0:26: [sdc] Attached SCSI disk
[ 1.218080] sd 2:0:0:22: [sdg] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.221902] sd 2:0:0:21: Attached scsi generic sg7 type 0
[ 1.224778] sd 2:0:0:21: [sdh] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.228138] sd 2:0:0:21: [sdh] Write Protect is off
[ 1.230348] sd 2:0:0:25: [sdd] Attached SCSI disk
[ 1.233903] sd 2:0:0:20: Attached scsi generic sg8 type 0
[ 1.236246] sd 2:0:0:20: [sdi] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.239513] sd 2:0:0:20: [sdi] Write Protect is off
[ 1.241794] sd 2:0:0:24: [sde] Attached SCSI disk
[ 1.244088] sd 2:0:0:21: [sdh] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.249007] sd 2:0:0:20: [sdi] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.253181] sd 2:0:0:19: Attached scsi generic sg9 type 0
[ 1.255730] sd 2:0:0:19: [sdj] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.259110] sd 2:0:0:19: [sdj] Write Protect is off
[ 1.261235] sd 2:0:0:23: [sdf] Attached SCSI disk
[ 1.265214] sd 2:0:0:22: [sdg] Attached SCSI disk
[ 1.267227] sd 2:0:0:18: Attached scsi generic sg10 type 0
[ 1.269935] sd 2:0:0:18: [sdk] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.273341] sd 2:0:0:19: [sdj] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.277362] sd 2:0:0:18: [sdk] Write Protect is off
[ 1.280756] sd 2:0:0:17: Attached scsi generic sg11 type 0
[ 1.283513] sd 2:0:0:17: [sdl] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.286731] sd 2:0:0:18: [sdk] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.290468] sd 2:0:0:21: [sdh] Attached SCSI disk
[ 1.292833] sd 2:0:0:17: [sdl] Write Protect is off
[ 1.296174] sd 2:0:0:20: [sdi] Attached SCSI disk
[ 1.298389] sd 2:0:0:16: Attached scsi generic sg12 type 0
[ 1.301208] sd 2:0:0:16: [sdm] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.304585] sd 2:0:0:17: [sdl] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.308906] sd 2:0:0:16: [sdm] Write Protect is off
[ 1.311919] sd 2:0:0:19: [sdj] Attached SCSI disk
[ 1.313897] sd 2:0:0:15: Attached scsi generic sg13 type 0
[ 1.316698] sd 2:0:0:16: [sdm] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.320370] sd 2:0:0:15: [sdn] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.324055] sd 2:0:0:15: [sdn] Write Protect is off
[ 1.327433] sd 2:0:0:14: Attached scsi generic sg14 type 0
[ 1.330038] sd 2:0:0:18: [sdk] Attached SCSI disk
[ 1.332066] sd 2:0:0:14: [sdo] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.335256] sd 2:0:0:15: [sdn] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.339196] sd 2:0:0:14: [sdo] Write Protect is off
[ 1.342776] sd 2:0:0:13: Attached scsi generic sg15 type 0
[ 1.345573] sd 2:0:0:13: [sdp] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.348562] sd 2:0:0:17: [sdl] Attached SCSI disk
[ 1.350497] sd 2:0:0:14: [sdo] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.355531] sd 2:0:0:13: [sdp] Write Protect is off
[ 1.358208] sd 2:0:0:12: Attached scsi generic sg16 type 0
[ 1.360815] sd 2:0:0:12: [sdq] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.364075] sd 2:0:0:13: [sdp] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.367740] sd 2:0:0:16: [sdm] Attached SCSI disk
[ 1.369849] sd 2:0:0:12: [sdq] Write Protect is off
[ 1.373438] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x188125786ea, max_idle_ns: 440795276273 ns
[ 1.377623] sd 2:0:0:11: Attached scsi generic sg17 type 0
[ 1.377859] sd 2:0:0:11: [sdr] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.378005] sd 2:0:0:11: [sdr] Write Protect is off
[ 1.378256] sd 2:0:0:11: [sdr] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.378639] sd 2:0:0:15: [sdn] Attached SCSI disk
[ 1.380664] sd 2:0:0:10: Attached scsi generic sg18 type 0
[ 1.380967] sd 2:0:0:10: [sds] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.381119] sd 2:0:0:10: [sds] Write Protect is off
[ 1.381389] sd 2:0:0:10: [sds] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.384464] sd 2:0:0:14: [sdo] Attached SCSI disk
[ 1.385634] sd 2:0:0:12: [sdq] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.385663] sd 2:0:0:9: Attached scsi generic sg19 type 0
[ 1.385741] sd 2:0:0:11: [sdr] Attached SCSI disk
[ 1.386069] sd 2:0:0:9: [sdt] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.386226] sd 2:0:0:9: [sdt] Write Protect is off
[ 1.386822] sd 2:0:0:9: [sdt] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.388375] sd 2:0:0:10: [sds] Attached SCSI disk
[ 1.389302] sd 2:0:0:8: Attached scsi generic sg20 type 0
[ 1.389413] sd 2:0:0:8: [sdu] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.389539] sd 2:0:0:8: [sdu] Write Protect is off
[ 1.389837] sd 2:0:0:8: [sdu] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.391885] sd 2:0:0:9: [sdt] Attached SCSI disk
[ 1.393465] sd 2:0:0:12: [sdq] Attached SCSI disk
[ 1.393497] sd 2:0:0:7: Attached scsi generic sg21 type 0
[ 1.397123] sd 2:0:0:7: [sdv] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.397365] sd 2:0:0:7: [sdv] Write Protect is off
[ 1.397609] sd 2:0:0:8: [sdu] Attached SCSI disk
[ 1.397631] sd 2:0:0:7: [sdv] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.399306] sd 2:0:0:6: Attached scsi generic sg22 type 0
[ 1.399555] sd 2:0:0:6: [sdw] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.399688] sd 2:0:0:6: [sdw] Write Protect is off
[ 1.399938] sd 2:0:0:6: [sdw] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.400566] sd 2:0:0:13: [sdp] Attached SCSI disk
supermin: internal insmod crc-itu-t.ko
[ 1.402077] sd 2:0:0:5: Attached scsi generic sg23 type 0
[ 1.403090] sd 2:0:0:7: [sdv] Attached SCSI disk
supermin: internal insmod crc7.ko
supermin: internal insmod crc8.ko
supermin: internal insmod libcrc32c.ko
supermin: picked /sys/block/sdab/dev as root device
supermin: creating /dev/root as block special 65:176
supermin: mounting new root on /root
[ 1.403116] sd 2:0:0:5: [sdx] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
mount: /root: Invalid argument
[ 1.403224] sd 2:0:0:5: [sdx] Write Protect is off
[ 1.403226] sd 2:0:0:5: [sdx] Mode Sense: 63 00 00 08
[ 1.403517] sd 2:0:0:5: [sdx] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.404406] sd 2:0:0:6: [sdw] Attached SCSI disk
[ 1.404703] sd 2:0:0:4: [sdy] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.404761] sd 2:0:0:4: Attached scsi generic sg24 type 0
[ 1.404831] sd 2:0:0:4: [sdy] Write Protect is off
[ 1.404833] sd 2:0:0:4: [sdy] Mode Sense: 63 00 00 08
[ 1.405097] sd 2:0:0:4: [sdy] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.406816] sd 2:0:0:3: [sdz] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.406859] sd 2:0:0:3: Attached scsi generic sg25 type 0
[ 1.406972] sd 2:0:0:3: [sdz] Write Protect is off
[ 1.406975] sd 2:0:0:3: [sdz] Mode Sense: 63 00 00 08
[ 1.407209] sd 2:0:0:3: [sdz] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.412134] sd 2:0:0:4: [sdy] Attached SCSI disk
[ 1.412173] sd 2:0:0:5: [sdx] Attached SCSI disk
[ 1.412669] sd 2:0:0:2: Attached scsi generic sg26 type 0
[ 1.412796] sd 2:0:0:2: [sdaa] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.412941] sd 2:0:0:2: [sdaa] Write Protect is off
[ 1.412943] sd 2:0:0:2: [sdaa] Mode Sense: 63 00 00 08
[ 1.413207] sd 2:0:0:2: [sdaa] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.414442] sd 2:0:0:1: Attached scsi generic sg27 type 0
[ 1.414495] sd 2:0:0:3: [sdz] Attached SCSI disk
[ 1.418581] sd 2:0:0:1: [sdab] 2048 512-byte logical blocks: (1.05 MB/1.00
MiB)
[ 1.420628] sd 2:0:0:1: [sdab] Write Protect is off
[ 1.420630] sd 2:0:0:1: [sdab] Mode Sense: 63 00 00 08
[ 1.425977] sd 2:0:0:1: [sdab] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.460647] sd 2:0:0:2: [sdaa] Attached SCSI disk
[ 1.508275] sd 2:0:0:1: [sdab] Attached SCSI disk
[ 1.538175] EXT4-fs (sdab): VFS: Can't find ext4 filesystem
[ 1.540218] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x00000100
[ 1.540218]
[ 1.540222] CPU: 0 PID: 1 Comm: init Not tainted
4.11.0-0.rc4.git1.1.fc27.x86_64 #1
[ 1.540224] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.10.2-1.fc26 04/01/2014
[ 1.540225] Call Trace:
[ 1.540234] dump_stack+0x8e/0xd1
[ 1.540243] panic+0xe9/0x237
[ 1.540282] do_exit+0xd3f/0xd70
[ 1.540289] ? trace_hardirqs_on_caller+0xf4/0x1b0
[ 1.540301] SyS_exit+0x17/0x20
[ 1.540307] entry_SYSCALL_64_fastpath+0x1f/0xc2
[ 1.540311] RIP: 0033:0x400e03
[ 1.540313] RSP: 002b:00007ffc58c7b998 EFLAGS: 00000246 ORIG_RAX:
000000000000003c
[ 1.540316] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000400e03
[ 1.540320] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000001
[ 1.540322] RBP: 0000000000000000 R08: 0000000000403bc4 R09: 00007ffc58c7b863
[ 1.540323] R10: 0000000000400e03 R11: 0000000000000246 R12: 0000000000000000
[ 1.540325] R13: 0000000000000041 R14: 0000000000000003 R15: 00007f6668448010
[ 1.540724] Kernel Offset: 0x13000000 from 0xffffffff81000000 (relocation
range: 0xffffffff80000000-0xffffffffbfffffff)
[ 1.652370] Rebooting in 1 seconds..
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
libguestfs lets you edit virtual machines. Supports shell scripting,
bindings from many languages. http://libguestfs.org
