The device shall set its default hardware state after each reset.
This includes that the timer is stopped which is especially important
if the guest does a reboot independantly of a watchdog bite. I moved
the initialization of the state variables completely from the init
to the reset function which is called right after init during the
first boot and afterwards during each reboot.
Signed-off-by: Bernhard Kohl <bernhard.k...@nsn.com>
---
hw/wdt_i6300esb.c | 39 +++++++++++++++++++++------------------
1 files changed, 21 insertions(+), 18 deletions(-)
diff --git a/hw/wdt_i6300esb.c b/hw/wdt_i6300esb.c
index 46e1df8..2408710 100644
--- a/hw/wdt_i6300esb.c
+++ b/hw/wdt_i6300esb.c
@@ -140,14 +140,26 @@ static void i6300esb_disable_timer(I6300State *d)
qemu_del_timer(d->timer);
}
-static void i6300esb_reset(I6300State *d)
+static void i6300esb_reset(DeviceState *dev)
{
- /* XXX We should probably reset other parts of the state here,
- * but we should also reset our state on general machine reset
- * too. For now just disable the timer so it doesn't fire
- * again after the reboot.
- */
+ PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, dev);
+ I6300State *d = DO_UPCAST(I6300State, dev, pdev);
+
+ i6300esb_debug("I6300State = %p\n", d);
+
i6300esb_disable_timer(d);
+
+ d->reboot_enabled = 1;
+ d->clock_scale = CLOCK_SCALE_1KHZ;
+ d->int_type = INT_TYPE_IRQ;
+ d->free_run = 0;
+ d->locked = 0;
+ d->enabled = 0;
+ d->timer1_preload = 0xfffff;
+ d->timer2_preload = 0xfffff;
+ d->stage = 1;
+ d->unlock_state = 0;
+ d->previous_reboot_flag = 0;
}
/* This function is called when the watchdog expires. Note that
@@ -181,7 +193,6 @@ static void i6300esb_timer_expired(void *vp)
if (d->reboot_enabled) {
d->previous_reboot_flag = 1;
watchdog_perform_action(); /* This reboots, exits, etc */
- i6300esb_reset(d);
}
/* In "free running mode" we start stage 1 again. */
@@ -394,18 +405,9 @@ static int i6300esb_init(PCIDevice *dev)
I6300State *d = DO_UPCAST(I6300State, dev, dev);
uint8_t *pci_conf;
- d->reboot_enabled = 1;
- d->clock_scale = CLOCK_SCALE_1KHZ;
- d->int_type = INT_TYPE_IRQ;
- d->free_run = 0;
- d->locked = 0;
- d->enabled = 0;
+ i6300esb_debug("I6300State = %p\n", d);
+
d->timer = qemu_new_timer(vm_clock, i6300esb_timer_expired, d);
- d->timer1_preload = 0xfffff;
- d->timer2_preload = 0xfffff;
- d->stage = 1;
- d->unlock_state = 0;
- d->previous_reboot_flag = 0;
pci_conf = d->dev.config;
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
@@ -427,6 +429,7 @@ static PCIDeviceInfo i6300esb_info = {
.qdev.name = "i6300esb",
.qdev.size = sizeof(I6300State),
.qdev.vmsd = &vmstate_i6300esb,
+ .qdev.reset = i6300esb_reset,
.config_read = i6300esb_config_read,
.config_write = i6300esb_config_write,
.init = i6300esb_init,
--
1.7.2.3
