This series is expected to be taken by Paolo (he plan to fix few things).

It includes the last versions of both series:
- SDHCI: clean v1/v2 Specs (part 2)
- SDHCI: add tuning sequence for UHS-I cards (part 3)

Since v10:
- rebased
- add Paolo's R-b in patch 2
- rename patch 11 subject (Alistair)
- add Alistair's R-b in "UHS-I cards tuning sequence" patches

Thanks Paolo!

Phil.

$ git backport-diff with v10
001/30:[----] [--] 'sdhci: use error_propagate(local_err) in realize()'
002/30:[----] [--] 'sdhci: add qtest to check the SD capabilities register'
003/30:[----] [--] 'sdhci: add check_capab_readonly() qtest'
004/30:[----] [--] 'sdhci: add a check_capab_baseclock() qtest'
005/30:[----] [--] 'sdhci: add a check_capab_sdma() qtest'
006/30:[----] [--] 'sdhci: add qtest to check the SD Spec version'
007/30:[----] [--] 'sdhci: add a 'spec_version property' (default to v2)'
008/30:[----] [--] 'sdhci: use a numeric value for the default CAPAB register'
009/30:[----] [--] 'sdhci: simplify sdhci_get_fifolen()'
010/30:[----] [--] 'sdhci: check the Spec v1 capabilities correctness'
011/30:[down] 'sdhci: replace DMA magic value by BLOCK_SIZE_MASK'
012/30:[----] [--] 'sdhci: Fix 64-bit ADMA2'
013/30:[----] [--] 'sdhci: check Spec v2 capabilities (DMA and 64-bit bus)'
014/30:[----] [--] 'hw/arm/exynos4210: access the 64-bit capareg with 
qdev_prop_set_uint64()'
015/30:[----] [--] 'hw/arm/exynos4210: add a comment about a very similar SDHCI 
(Spec. v2)'
016/30:[----] [--] 'hw/arm/xilinx_zynq: fix the capabilities register to match 
the datasheet'
$ git backport-diff with v9
017/30:[----] [--] 'sdhci: add support for v3 capabilities'
018/30:[----] [--] 'sdhci: rename the hostctl1 register'
019/30:[----] [--] 'sdhci: implement the Host Control 2 register (tuning 
sequence)'
020/30:[----] [--] 'sdbus: add trace events'
021/30:[----] [--] 'sdhci: implement UHS-I voltage switch'
022/30:[----] [--] 'sdhci: implement CMD/DAT[] fields in the Present State 
register'
023/30:[0002] [FC] 'hw/arm/bcm2835_peripherals: implement SDHCI Spec v3'
024/30:[----] [--] 'hw/arm/bcm2835_peripherals: change maximum block size to 
1kB'
025/30:[----] [--] 'hw/arm/fsl-imx6: implement SDHCI Spec. v3'
026/30:[----] [-C] 'hw/arm/xilinx_zynqmp: fix the capabilities/spec version to 
match the datasheet'
027/30:[----] [--] 'hw/arm/xilinx_zynqmp: enable the UHS-I mode'
028/30:[----] [-C] 'sdhci: check Spec v3 capabilities qtest'
029/30:[0006] [FC] 'sdhci: add a check_capab_v3() qtest'
030/30:[----] [--] 'sdhci: add Spec v4.2 register definitions'

Philippe Mathieu-Daudé (29):
  sdhci: use error_propagate(local_err) in realize()
  sdhci: add qtest to check the SD capabilities register
  sdhci: add check_capab_readonly() qtest
  sdhci: add a check_capab_baseclock() qtest
  sdhci: add a check_capab_sdma() qtest
  sdhci: add qtest to check the SD Spec version
  sdhci: add a 'spec_version property' (default to v2)
  sdhci: use a numeric value for the default CAPAB register
  sdhci: simplify sdhci_get_fifolen()
  sdhci: check the Spec v1 capabilities correctness
  sdhci: replace DMA magic value by BLOCK_SIZE_MASK
  sdhci: check Spec v2 capabilities (DMA and 64-bit bus)
  hw/arm/exynos4210: access the 64-bit capareg with qdev_prop_set_uint64()
  hw/arm/exynos4210: add a comment about a very similar SDHCI (Spec. v2)
  hw/arm/xilinx_zynq: fix the capabilities register to match the datasheet
  sdhci: add support for v3 capabilities
  sdhci: rename the hostctl1 register
  sdhci: implement the Host Control 2 register (tuning sequence)
  sdbus: add trace events
  sdhci: implement UHS-I voltage switch
  sdhci: implement CMD/DAT[] fields in the Present State register
  hw/arm/bcm2835_peripherals: implement SDHCI Spec v3
  hw/arm/bcm2835_peripherals: change maximum block size to 1kB
  hw/arm/fsl-imx6: implement SDHCI Spec. v3
  hw/arm/xilinx_zynqmp: fix the capabilities/spec version to match the datasheet
  hw/arm/xilinx_zynqmp: enable the UHS-I mode
  sdhci: check Spec v3 capabilities qtest
  sdhci: add a check_capab_v3() qtest
  sdhci: add Spec v4.2 register definitions

Sai Pavan Boddu (1):
  sdhci: Fix 64-bit ADMA2

 include/hw/sd/sd.h           |  20 +++
 include/hw/sd/sdhci.h        |   6 +-
 hw/sd/sdhci-internal.h       |  77 +++++++--
 hw/arm/bcm2835_peripherals.c |  23 +--
 hw/arm/exynos4210.c          |  14 +-
 hw/arm/fsl-imx6.c            |   7 +
 hw/arm/xilinx_zynq.c         |  53 ++++---
 hw/arm/xlnx-zynqmp.c         |  30 ++--
 hw/sd/core.c                 |  61 ++++++-
 hw/sd/sd.c                   |  29 ++++
 hw/sd/sdhci.c                | 367 +++++++++++++++++++++++++++++++------------
 hw/sd/trace-events           |   9 ++
 tests/sdhci-test.c           | 246 +++++++++++++++++++++++++++++
 tests/Makefile.include       |   4 +
 14 files changed, 790 insertions(+), 156 deletions(-)
 create mode 100644 tests/sdhci-test.c

-- 
2.16.1


Reply via email to