Hi  this is the v10 version of the multifd patches,

Lots of changes from previous versions:
a - everything is sent now through the multifd channels, nothing is sent 
through main channel
b - locking is band new, I was getting into a hole with the previous approach, 
right now, there is a single way to
    do locking (both source and destination)
       main thread : sets a ->sync variable for each thread and wakeps it
       multifd threads: clean the variable and signal (sem) back to main thread

    using this for either:
    - all threads have started
    - we need to synchronize after each round through memory
    - all threads have finished

c - I have to use a qio watcher for a thread to wait for ready data to read

d - lots of cleanups

e - to make things easier, I have included the missing tests stuff on
    this round of patches, because they build on top of them

f - lots of traces, it is now much easier to follow what is happening

Now, why it is an RFC:

- in the last patch, there is still race between the whatcher, the
  ->quit of the threads and the last synchronization.  Techinically they
  are done in oder, but in practice, they are hanging sometimes.

- I *know* I can optimize the synchronization of the threads sending
  the "we start a new round" through the multifd channels, have to add a flag 

- Not having a thread on the incoming side  is a mess, I can't block waiting 
for things to happen :-(

- When doing the synchronization, I need to optimize the sending of the "not 
finished packet" of pages, working on that.

please, take a look and review.

Thanks, Juan.


This series is on top of my migration test series just sent, only reject should 
be on the test system, though.

On v9 series for you:
- qobject_unref() as requested by dan

  Yes he was right, I had a reference leak for _non_ multifd, I
  *thought* he mean for multifd, and that took a while to understand
  (and then find when/where).

- multifd page count: it is dropped for good
- uuid handling: we use the default qemu uuid of 0000...
- uuid handling: using and struct and sending the struct
  * idea is to add a size field and add more parameter after that
  * anyone has a good idea how to "ouptut" info
    migrate_capabilities/parameters json into a string and how to read it back?
- changed how we test that all threads/channels are already created.
  Should be more robust.
- Add tests multifd.  Still not ported on top of migration-tests series sent 
  waiting for review on the ideas there.
- Rebase and remove al the integrated patches (back at 12)

Please, review.

Later, Juan.

Things NOT done yet:

- drop x-multifd-page-count?  We can use performance to set a default value
- paolo suggestion of not having a control channel
  needs iyet more cleanups to be able to have more than one ramstate, trying it.
- still not performance done, but it has been very stable

On v8:
- use connect_async
- rename multifd-group to multifd-page-count (danp suggestion)
- rename multifd-threads to multifd-channels (danp suggestion)
- use new qio*channel functions
- Address rest of comments left

So, please review.

My idea will be to pull this changes and continue performance changes
for inside, basically everything is already reviewed.

Thanks, Juan.

On v7:
- tests fixed as danp wanted
- have to revert danp qio_*_all patches, as they break multifd, I have to 
investigate why.
- error_abort is gone.  After several tries about getting errors, I ended 
having a single error
  proceted by a lock and first error wins.
- Addressed basically all reviews (see on ToDo)
- Pointers to struct are done now
- fix lots of leaks
- lots of small fixes

- Improve migration_ioc_porcess_incoming
- Add test for migration_has_all_channels
- change recv_state to use pointers to parameters
  make easier to receive channels out of order
- use g_strdup_printf()
- improve count of threads to know when we have to finish
- report channel id's on errors
- Use last_page parameter for multifd_send_page() sooner
- Improve commets for address
- use g_new0() instead of g_malloc()
- create MULTIFD_CONTINUE instead of using UINT16_MAX
- clear memory used by group of pages
  once there, pass everything to the global state variables instead of being
  local to the function.  This way it works if we cancel migration and start
  a new one
- Really wait to create the migration_thread until all channels are created
- split initial_bytes setup to make clearer following patches.
- createRAM_SAVE_FLAG_MULTIFD_SYNC macro, to make clear what we are doing
- move setting of need_flush to inside bitmap_sync
- Lots of other small changes & reorderings

Please, comment.


- tests from qio functions (a.k.a. make danp happy)
- 1st message from one channel to the other contains:
   <uuid> multifd <channel number>
   This would allow us to create more channels as we want them.
   a.k.a. Making dave happy
- Waiting in reception for new channels using qio listeners
  Getting threads, qio and reference counters working at the same time
  was interesing.
  Another make danp happy.

- Lots and lots of small changes and fixes.  Notice that the last 70 patches
  that I merged or so what to make this series easier/smaller.

- NOT DONE: I haven't been woring on measuring performance
  differences, this was about getting the creation of the
  threads/channels right.

So, what I want:

- Are people happy with how I have (ab)used qio channels? (yes danp,
  that is you).
- My understanding is th


- Make paolo happy: He wanted to test using control information
  through each channel, not only pages.  This requires yet more
  cleanups to be able to have more than one QEMUFile/RAMState open at
  the same time.

- How I create multiple channels.  Things I know:
  * with current changes, it should work with fd/channels (the multifd bits),
    but we don;t have a way to pass multiple fd;s or exec files.
    Danp, any idea about how to create an UI for it?
  * My idea is that we would split current code to be:
    + channel creation at migration.c
    + rest of bits at ram.c
    + change format to:
      <uuid> main <rest of migration capabilities/paramentes> so we can check
      <uuid> postcopy <no clue what parameters are needed>
          Dave wanted a way to create a new fd for postcopy for some time
    + Adding new channels is easy

- Performance data/numbers: Yes, I wanted to get this out at once, I
  would continue with this.

Please, review.

This is the 4th version of multifd. Changes:
- XBZRLE don't need to be checked for
- Documentation and defaults are consistent
- split socketArgs
- use iovec instead of creating something similar.
- We use now the exported size of target page (another HACK removal)
- created qio_chanel_{wirtev,readv}_all functions.  the _full() name
  was already taken.
  What they do is the same that the without _all() function, but if it
  returns due to blocking it redo the call.
- it is checkpatch.pl clean now.

Please comment, Juan.

*** BLURB HERE ***

Juan Quintela (24):
  tests: Add migration precopy test
  tests: Add migration xbzrle test
  migration: Create tcp_port parameter
  migration: Set the migration tcp port
  tests: Migration ppc now inlines its program
  tests: Add basic migration precopy tcp test
  [RFH] tests: Add migration compress threads tests
  migration: Add multifd test
  migration: Set error state in case of error
  migration: In case of error just end the migration
  migration: terminate_* can be called for other threads
  migration: Reference counting recv channels correctly
  migration: Introduce multifd_recv_new_channel()
  migration: Be sure all recv channels are created
  migration: Synchronize send threads
  migration: Synchronize recv threads
  migration: Export functions to create send channels
  migration: Add multifd traces for start/end thread
  migration: Create multifd channels
  migration: Delay start of migration main routines
  migration: Transmit initial package through the multifd channels
  migration: Create ram_multifd_page
  migration: Create pages structure for reception
  [RFC] migration: Send pages through the multifd channels

 hmp.c                  |   3 +
 migration/migration.c  |  31 ++-
 migration/migration.h  |   3 +
 migration/ram.c        | 504 +++++++++++++++++++++++++++++++++++++++++++++++--
 migration/ram.h        |   3 +
 migration/socket.c     |  83 +++++++-
 migration/socket.h     |  10 +
 migration/trace-events |   8 +
 qapi/migration.json    |  19 +-
 tests/migration-test.c | 309 ++++++++++++++++++++++++++----
 10 files changed, 898 insertions(+), 75 deletions(-)


Reply via email to